This presser foot is used for sewing on nylon thread or wire for crafts.
Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.
Series & Part Number
MO-2800: 40138099
MO-1000: 40138099
MO-735: A9820-655-0A0A
MO-114D/104D: A9820-655-0A0A
MO-655: A9820-655-0A0A
MO654DE/MO-644: A9820-655-0A0A
MO-623: A9820-655-0A0A
MO-1200QVP: A9820-655-0A0A
MO-2000QVP: 40138099
This is a set of eight presser feet that can be used for practical sewing or decorative stitching.
This box collects scraps of fabric cut by the overlock sewing machine.
This is useful for throwing out all scraps after work is completed, without allowing them to scatter around the work area. When storing the sewing machine, accessories such as the foot controller can be stored in the box.
Series & Part Number
MO-1000/2000: 40134096
MO-735: A9108-130-000
MO-114D/104D: A910-880-L000
MO-655: A9108-202-000
MO-654DE: A9108-202-000
MO-644D: A9108-202-000
MO-623: A9108-202-000
MO-1200QVP: A910-880-L000
This controller can be used to start/stop sewing and adjust the sewing speed with your foot.
Controlling the sewing machine with your foot leaves both of you hands free while sewing
Part Number: 4016219
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves