This presser foot is used for sewing on nylon thread or wire for crafts.
This presser foot is used to sew blind hem stitching, decorative flatlock or pintucks.
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.
Compatible with Juki TL machines and J-150 QVP. Such as:
This controller can be used to start/stop sewing and adjust the sewing speed with your foot.
Content
This presser foot is used for sewing on nylon thread or wire for crafts.
Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.
Series & Part Number
MO-2800: 40138099
MO-1000: 40138099
MO-735: A9820-655-0A0A
MO-114D/104D: A9820-655-0A0A
MO-655: A9820-655-0A0A
MO654DE/MO-644: A9820-655-0A0A
MO-623: A9820-655-0A0A
MO-1200QVP: A9820-655-0A0A
MO-2000QVP: 40138099
This presser foot is used to sew blind hem stitching, decorative flatlock or pin-tucks.
This presser foot can be used with either the right or the left needle and has a guide plate that can be moved within a wide range.
Since the seam width can be adjusted, this presser foot is also useful for decorating by sewing along a folded edge with decorative flatlock or with roll hem (pin-tuck) stitches.
Series & Part Number
MO-2800: 40149058
MO-1000: 40149058
MO-735: A9521-634-0A0A
MO-114D/104D: A9521-634-0A0A
MO-655: A9521-634-0A0A
MO654DE/MO-644: A9521-634-0A0A
MO-623: A9521-634-0A0A
MO-50e: 40131946
MO-80CB: 40131946
MO-1200QVP: A9521-634-0A0A
MO-2000QVP: 40149058
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.
Part Number: 40138095 and A98156550A0
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.
The guide, being long at the front and back, makes this gauge perfect for sewing long straight lines
The gauge can be moved as far as 3/4" (20 mm) from the needle and secured by loosening and tightening the screws with a screwdriver
Compatible with Juki TL machines and J-150 QVP. Such as: