WALLABY CABINET WHITE

Expand your workspace with the incredible Wallaby Cabinet. This Cabinet has a three position airlift that holds most sewing machines comfortably and moves effortlessly up and down in a small footprint.

CABINET SPECIFICATIONS

• Closed Dimensions:
  • Closed: 42 ¾” W x 19″ D (front to back) x 30 ¼” H
  • Open: 70 ⅝” W x 59 ⅞” D x 29 ½” H
• Sewing Machines That Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Made from melamine laminate, MDF, and composite
• Additional Questions? Visit our FAQs page

• • Cubby Width: 13 ¼”
  • Cubby Depth: 14 ¾”
  • Cubby Height: 15 ½”

SEWING MACHINES THAT DO NOT FIT WALLABY II

• Baby Lock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Elna – 920 eXpressive
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.

SHIPPING INFORMATION

• Cabinet ships in four boxes
• Weighs a total of 170 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Adjustable wrench
• Optional:
  • Small drill bit (1/16 or ⅛) to help pre-drill holes
  • WD-40

Expand your workspace with the incredible Wallaby Cabinet. This Cabinet has a three position airlift that holds most sewing machines comfortably and moves effortlessly up and down in a small footprint.

CABINET SPECIFICATIONS

• Closed Dimensions:
  • Closed: 42 ¾” W x 19″ D (front to back) x 30 ¼” H
  • Open: 70 ⅝” W x 59 ⅞” D x 29 ½” H
• Sewing Machines That Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Made from melamine laminate, MDF, and composite
• Additional Questions? Visit our FAQs page

• • Cubby Width: 13 ¼”
  • Cubby Depth: 14 ¾”
  • Cubby Height: 15 ½”

SEWING MACHINES THAT DO NOT FIT WALLABY II

• Baby Lock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Elna – 920 eXpressive
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.

SHIPPING INFORMATION

• Cabinet ships in four boxes
• Weighs a total of 170 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Adjustable wrench
• Optional:
  • Small drill bit (1/16 or ⅛) to help pre-drill holes
  • WD-40

The dingo cutting table has an exceptional amount of storage that is the perfect addition to your sewing room.

CABINET DIMENSIONS

• Dimensions Closed:
  • 46 ¼” W x 21 ¼” D x 35 ¼” H
• Dimensions Open (leaf open):
  • 46 ¼” W x 40 ½” D x 34 ¼” H
• Drawer Dimensions:
  • All nine drawers are19 ¾” W (left to right)
  • All nine drawers are 15” D (front to back)
  • Drawer Heights (top to bottom):
    • Seven of the drawers are 3 ¼” H
    • Bottom left drawer is 7 ⅛” H
    • Bottom right drawer is 12 ¼” H
      • The drawer is large enough to store a small serger with a weight limit of 20 pounds

SHIPPING INFORMATION

• The Dingo II Cutting and Storage Cabinet is shipped ready to assemble in four separate boxes
• The Dingo II Cutting and Storage Cabinet weights a total of 218 pounds
• Cabinets, tables, and chairs cannot be shipped to a PO Box

TABLE SPECIFICATIONS

• Table Dimensions:
  • Legs Unfolded: 40 ¼” W x 19 ¾” D x 28 ½” H
  • Legs Folded: 40 ¼” W x 19 ¾” D x 4 ½” H
• The Heavyweight Table has an adjustable platform so it will accommodate the Singer Featherweight™ 221K and 222K
• No need for custom insert, 221K and 222K fit perfectly
• Construction: Melamine/MDF with Steel Legs
• Manual Platform Weight Limit: 45 lbs

SHIPPING INFORMATION

• The Heavyweight Table arrives fully assembled in one box
• Shipped by FedEx or UPS
• Weighs a total of 37 pounds
• Cannot be shipped to a PO Box

*Please provide the make and model of your sewing machine upon check out on the note section. Your custom insert will be specific to your machine and the cabinet you have purchased. If you are unsure of the make and model, please double check.

• please note UPON CHECKOUT which machine you have.
• (NOTE: Inserts ship separately from cabinets and will arrive later.)

********Please provide the make and model of your sewing machine upon check out on the note section. *********

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

• Kangaroo II Cabinet Dimensions
  • Open (quilt leaf out)
    • 55 ⅝” W x 40 ½” D x 29 ½ H
  • Closed
    • 55 ⅝” W x 21” D x 29 ½ H
• Joey II Dimensions
  • 25 ¾” W x 16 ½” D x 24″ H
  • Top two drawer dimensions:
    • 22 ½ ” W x 13″ D x 2 ½” H
  • Bottom drawer dimensions:
    • 22 ½ ” W x 13″ D x 8″ H
• Sewing Machines that Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23-3/4” (left to right)
    • Depth: 12-1/2” (front to back)
    • Height: 14-1/2”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Both products made from melamine laminate, MDF, and composite
• Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

• BabyLock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five boxes
• Kangaroo II weighs a total of 156 pounds
• Joey II weighs a total of 60 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Optional:
  • WD-40
  • Adjustable wrench