WALLABY CABINET TEAK

$2,199.00

Expand your workspace with the incredible Wallaby Cabinet. This Cabinet has a three position airlift that holds most sewing machines comfortably and moves effortlessly up and down in a small footprint.

Description

Expand your workspace with the incredible Wallaby Cabinet. This Cabinet has a three position airlift that holds most sewing machines comfortably and moves effortlessly up and down in a small footprint.

CABINET SPECIFICATIONS

  • Closed Dimensions:
    • Closed: 42 ¾” W x 19″ D (front to back) x 30 ¼” H
    • Open: 70 ⅝” W x 59 ⅞” D x 29 ½” H
  • Sewing Machines That Fit:
    • Supports sewing machines up to 55 pounds
      • Width: 23 ¾” (left to right)
      • Depth: 12 ½” (front to back)
      • Height: 14 ½”
    • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
  • Made from melamine laminate, MDF, and composite
  • Additional Questions? Visit our FAQs page

The hideaway cubby is perfect for sergers or baskets of fabric

    • Cubby Width: 13 ¼”
    • Cubby Depth: 14 ¾”
    • Cubby Height: 15 ½”

SEWING MACHINES THAT DO NOT FIT WALLABY II

We are aware of the following sewing machines that are too large to fit into the Kangaroo Wallaby II model (K8405 Teak and K8411 Ash White):

Incompatible Machines:

  • Baby Lock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Elna – 920 eXpressive
  • Janome – Horizon Memory Craft 15,000
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.

The above are the known machines that do not fit properly. Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

Revised 12/20/2018

SHIPPING INFORMATION

  • Cabinet ships in four boxes
  • Weighs a total of 170 pounds
  • Arrow determines shipping carrier, FedEx or UPS
  • Cabinets, tables and chairs cannot be shipped to a PO Box
  • If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Wallaby II Cabinet Manual and save it to your computer.

For assembly, you’ll need:

  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet
  • Adjustable wrench
  • Optional:
    • Small drill bit (1/16 or ⅛) to help pre-drill holes
    • WD-40

Standard Features

  • Three-position hydraulic lift
  • Moves your machine into three positions: free-arm, flatbed and storage
  • Designed with gas strut mechanism
  • Quilt leaf stored on the back of the cabinet expands your workspace and prevents large quilts or large pieces of fabric from pulling and ending up on the floor
  • Locking industrial casters for portability and stability

Standard Accessories

Standard Accessory List Coming Soon!

Optional Accessories

Optional Accessory List Coming Soon!

Catalogs

Catalog Coming Soon!
Manual Coming Soon!

Video Tutorials

Quick Comparison

SettingsWALLABY CABINET TEAK removeDINGO II CUTTING & STORAGE CABINET WHITE removeGIDGET II TABLE removeKANGAROO JOEY CABINET WHITE removeGINGER CABINET removeJUDY SEWING CABINET remove
NameWALLABY CABINET TEAK removeDINGO II CUTTING & STORAGE CABINET WHITE removeGIDGET II TABLE removeKANGAROO JOEY CABINET WHITE removeGINGER CABINET removeJUDY SEWING CABINET remove
ImageKangarooKabinetsWallabyTeakCabinetdingoIItablewhitekangaroojoeycabinetwhitegingersewingcabinetJudyCabinet white display
SKUWALLABY-TEAKDINGO-WHITEGidget IIJOEY-WHITEGINGER-CABINETJUDY-CABINET
Rating
Price$2,199.00$2,199.00 $269.00$2,499.00$1,299.00$899.00
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionExpand your workspace with the incredible Wallaby Cabinet. This Cabinet has a three position airlift that holds most sewing machines comfortably and moves effortlessly up and down in a small footprint.

The dingo cutting table has an exceptional amount of storage that is the perfect addition to your sewing room.

The Arrow Gidget II is an affordable table, that allows allows the sewer to have a greater workspace while sewing and or quilting. It's opening is larger than the Gidget I. This sturdy table allows a flat bed sewing experience  vs. a raised table that normally would come with your machine. This means the sewer or quilter will be more comfortable while sewing and having a great workspace. ****** PLEASE make sure you order your custom insert here  Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

Allowing you to cut, sew and iron all in one spot, the Ginger cabinet offers five drawers and four cubbies to store your thread and accessories. On the far left, you will cut your fabric, in the middle you will sew your project and on the right you will iron with the built in ironing board.The Judy Sewing Cabinet has a three-position airlift that holds most sewing machines comfortably leaving room for sewers to sit while completing projects.
Content

Expand your workspace with the incredible Wallaby Cabinet. This Cabinet has a three position airlift that holds most sewing machines comfortably and moves effortlessly up and down in a small footprint.

CABINET SPECIFICATIONS

  • Closed Dimensions:
    • Closed: 42 ¾” W x 19″ D (front to back) x 30 ¼” H
    • Open: 70 ⅝” W x 59 ⅞” D x 29 ½” H
  • Sewing Machines That Fit:
    • Supports sewing machines up to 55 pounds
      • Width: 23 ¾” (left to right)
      • Depth: 12 ½” (front to back)
      • Height: 14 ½”
    • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
  • Made from melamine laminate, MDF, and composite
  • Additional Questions? Visit our FAQs page
The hideaway cubby is perfect for sergers or baskets of fabric
    • Cubby Width: 13 ¼”
    • Cubby Depth: 14 ¾”
    • Cubby Height: 15 ½”

SEWING MACHINES THAT DO NOT FIT WALLABY II

We are aware of the following sewing machines that are too large to fit into the Kangaroo Wallaby II model (K8405 Teak and K8411 Ash White): Incompatible Machines:
  • Baby Lock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Elna – 920 eXpressive
  • Janome – Horizon Memory Craft 15,000
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
The above are the known machines that do not fit properly. Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit. Revised 12/20/2018

SHIPPING INFORMATION

  • Cabinet ships in four boxes
  • Weighs a total of 170 pounds
  • Arrow determines shipping carrier, FedEx or UPS
  • Cabinets, tables and chairs cannot be shipped to a PO Box
  • If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Wallaby II Cabinet Manual and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet
  • Adjustable wrench
  • Optional:
    • Small drill bit (1/16 or ⅛) to help pre-drill holes
    • WD-40

The dingo cutting table has an exceptional amount of storage that is the perfect addition to your sewing room.

CABINET DIMENSIONS

  • Dimensions Closed:
    • 46 ¼” W x 21 ¼” D x 35 ¼” H
  • Dimensions Open (leaf open):
    • 46 ¼” W x 40 ½” D x 34 ¼” H
  • Drawer Dimensions:
    • All nine drawers are19 ¾” W (left to right)
    • All nine drawers are 15” D (front to back)
    • Drawer Heights (top to bottom):
      • Seven of the drawers are 3 ¼” H
      • Bottom left drawer is 7 ⅛” H
      • Bottom right drawer is 12 ¼” H
        • The drawer is large enough to store a small serger with a weight limit of 20 pounds

SHIPPING INFORMATION

  • The Dingo II Cutting and Storage Cabinet is shipped ready to assemble in four separate boxes
  • The Dingo II Cutting and Storage Cabinet weights a total of 218 pounds
  • Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Dingo II Cutting and Storage Cabinet manual and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet

Just like her younger sister (the Gidget I), the Gidget II Table is a self-contained, fully collapsible workstation. Once she arrives, you’ll be saying goodbye to the wiggles, wobbles and general woes of other sewing tables.

But that doesn’t mean she can’t easily be stored or transported. With velcro straps to secure her steel locking legs and dual-wheel roller design, transportation to classes, retreats and even your RV is a breeze.

What’s more, an increased opening size of 23 ½” W x 12 ½” D, means the Gidget II Table is capable of supporting a 45-pound machine!

Find out more about the Gidget II table below!

Table Specifications

  • Dimensions Open:
    • 40 ¼” W x 19 ¾” D x 28 ½” H
  • Dimensions with Legs Folded:
    • 40 ¼” W x 19 ¾” D x 4 ½” H
  • The Gidget II Table will accommodate sewing machines no larger than:
    • 23 ½” W (left to right)
    • 12 ¼” D (front to back)
    • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.

SHIPPING INFORMATION

The cabinet is fully assembled and shipping one box Gidget II weighs a total of 37 pounds Cabinets, tables, and chairs cannot be shipped to a PO Box If you wish to use the flat bed of the cabinet you must order the  custom insert here.  This  will be shipped separately and delivered three-eight  weeks later. This is custom made for each sewing machine.

COMPARE GIDGET I VS. GIDGET II

Gidget I has a smaller opening size (17 ½” W vs 7 ⅜” D) compared to the large opening on Gidget II (23 ½” W x 12” D). Gidget II Table features two wheels for easier portability when folded flat. Gidget I does not have wheels but can easily be transported with collapsible legs. Gidget I is made of particle board with steel locking legs. Gidget II is made with denser MDF (medium density fiberboard) and steel locking legs. Gidget II will require a  for her opening. Gidget I has a smaller opening, and may not need an insert if your machine is deep enough to fill most gaps.

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

  • Kangaroo II Cabinet Dimensions
    • Open (quilt leaf out)
      • 55 ⅝” W x 40 ½” D x 29 ½ H
    • Closed
      • 55 ⅝” W x 21” D x 29 ½ H
  • Joey II Dimensions
    • 25 ¾” W x 16 ½” D x 24″ H
    • Top two drawer dimensions:
      • 22 ½ ” W x 13″ D x 2 ½” H
    • Bottom drawer dimensions:
      • 22 ½ ” W x 13″ D x 8″ H
  • Sewing Machines that Fit:
    • Supports sewing machines up to 55 pounds
      • Width: 23-3/4” (left to right)
      • Depth: 12-1/2” (front to back)
      • Height: 14-1/2”
    • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
  • Both products made from melamine laminate, MDF, and composite
  • Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

We are aware of the following sewing machines that are too large to fit into the Kangaroo II sewing cabinet (K8805 Teak and K8811 Ash White):
  • BabyLock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Janome – Horizon Memory Craft 15,000
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
  • Elna –  eXpressive 920
    • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
  • The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.
Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

SHIPPING INFORMATION

  • The cabinet is shipped ready to assemble in five boxes
  • Kangaroo II weighs a total of 156 pounds
  • Joey II weighs a total of 60 pounds
  • Arrow determines shipping carrier, FedEx or UPS
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

Assembly instructions are included with the cabinet. You may also download the Kangaroo II and Joey II manuals and save them to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet
  • Optional:
    • WD-40
    • Adjustable wrench

Allowing you to cut, sew and iron all in one spot, the Ginger cabinet offers five drawers and four cubbies to store your thread and accessories. On the far left, you will cut your fabric, in the middle you will sew your project and on the right you will iron with the built in ironing board.

CABINET SPECIFICATIONS

  • Cabinet Dimensions:
    • Open: 61 ¼” W x 31 ½” D x 29 ½” H
    • Closed: 48 ½” W x 31 ½” D x 29 ½” H
  • Drawer (x3) Dimensions:
    • 4 ⅜” W x 12” D x 3 ½” H
  • Shelf (x4) Dimensions:
    • 11 ¾” W x 7 ½” D x 6 1⁄4 ” H
  • Cutting Mat Dimensions:
    • 23” W x 17” D
  • Ginger Cabinet is ideal for Sewing Machines:
    • Up to 45 pounds
    • Maximum Machine Dimensions:
      • Width: 23 ¾” (left to right)
      • Depth: 12 ½” (front to back)
      • Sewing machine opening is beveled
    • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
  • The Ginger features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT GINGER SEWING CABINET

We are aware of the following sewing machines that are too large to fit into the Ginger Cabinet:
  • BabyLock – Destiny and Solaris
  • Brother – Dream VX8500D and Luminaire Innov-is XP1
  • Janome – Horizon Memory Craft 15,000
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
  • Elna –  eXpressive 920
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.
  • Storage includes:
    • Five drawers located on the front left
      • Top two hold thread pegs which hold 24 thread spools each (48 total)
      • Bottom three are single compartments for other storage
    • Four shelves located on the left side

SHIPPING INFORMATION

  • The cabinet is shipped LTL, ready to assemble in three separate boxes
  • Ginger weighs a total of 165 pounds
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Ginger Cabinet manual and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer/mallet
  • Optional:
    • WD-40
    • Adjustable wrench
This sewing cabinet has a three-position airlift that holds most sewing machines comfortably and moves effortlessly up and down. Room in front of the lift allows for sewers to sit in the correct sewing position.  Cabinet Open:
    • 50 ¾” W x 17 ¼” D x 29 ½” H
  • Cabinet Closed:
    • 25 ½” W x 17 ¼” D x 30 1/8” H
  • Lift Opening, A10:
    • 20 15/16” W x 11 3/8” D x Adjustable Height
*Please measure your machine and include knobs, plugs, etc. that extend beyond the body of machine.
  • Construction: Vinyl laminate/MDF/Composite
  • Dual-Hydraulic Lift Weight Limit: 55 #s
  • Custom Machine Insert Available for machines less than 17-1/2″ wide by 12-1/2″ deep

SEWING MACHINES THAT DO NOT FIT JUDY

We are aware of the following sewing machines that are too large to fit into the Judy. Incompatible Machines:
  • Baby Lock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Elna – 920 eXpressive
  • Janome – Horizon Memory Craft 15,000 & Continental M7
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flat bed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flat bed position.
The above are the known machines that do not fit properly. Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information