Embroider beautiful designs on shoes with the shoe frame.
Two frame sizes included.
It's always a good idea to check your stitch plate for burrs and needle damage. This is the original stitch plate and side plate your TL machine came with if you ever need a replacement.
Juki TL models include:
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. This gauge can be swung toward you so that it is out of the way when not in use.
Compatible with Juki TL machines and J-150 QVP. Such as:
It's always a good idea to check your stitch plate for burrs and needle damage to ensure continued beautiful stitch quality. This is the original stitch plate your TL machine came with if you ever need a replacement.
This presser foot is used to sew blind hem stitching, decorative flatlock or pin-tucks.
This presser foot can be used with either the right or the left needle and has a guide plate that can be moved within a wide range.
Since the seam width can be adjusted, this presser foot is also useful for decorating by sewing along a folded edge with decorative flatlock or with roll hem (pin-tuck) stitches.
Series & Part Number
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.
Part Number: 40138095 and A98156550A0
This presser foot is used for sewing on nylon thread or wire for crafts.
Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.