KANGAROO JOEY CABINET WHITE

$2,499.00

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

Description

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

  • Kangaroo II Cabinet Dimensions
    • Open (quilt leaf out)
      • 55 ⅝” W x 40 ½” D x 29 ½ H
    • Closed
      • 55 ⅝” W x 21” D x 29 ½ H
  • Joey II Dimensions
    • 25 ¾” W x 16 ½” D x 24″ H
    • Top two drawer dimensions:
      • 22 ½ ” W x 13″ D x 2 ½” H
    • Bottom drawer dimensions:
      • 22 ½ ” W x 13″ D x 8″ H
  • Sewing Machines that Fit:
    • Supports sewing machines up to 55 pounds
      • Width: 23-3/4” (left to right)
      • Depth: 12-1/2” (front to back)
      • Height: 14-1/2”
    • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
  • Both products made from melamine laminate, MDF, and composite
  • Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

We are aware of the following sewing machines that are too large to fit into the Kangaroo II sewing cabinet (K8805 Teak and K8811 Ash White):

  • BabyLock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Janome – Horizon Memory Craft 15,000
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
  • Elna –  eXpressive 920
    • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
  • The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

SHIPPING INFORMATION

  • The cabinet is shipped ready to assemble in five boxes
  • Kangaroo II weighs a total of 156 pounds
  • Joey II weighs a total of 60 pounds
  • Arrow determines shipping carrier, FedEx or UPS
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

Assembly instructions are included with the cabinet. You may also download the Kangaroo II and Joey II manuals and save them to your computer.

For assembly, you’ll need:

  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet
  • Optional:
    • WD-40
    • Adjustable wrench

Standard Features

  • Quilt leaf stored on the back of the cabinet
  • Expands your workspace and prevents large quilts or large pieces of fabric from pulling and ending up on the floor
  • Adjustable three-position hydraulic lift
  • Removable cover to provide smooth work or cutting area when the sewing machine is in the storage position
  • Removable front panel to use knee lifter
  • Large left drawer includes a removable cover to expand your work area
  • Remove cover for compact storage
  • Does not feature doors or leaves, cabinet fits within 56″ area. The sewing machine is exposed in all three positions
  • Heavy duty locking casters provide excellent portability and stability
  • Three drawers of storage space for storing notions and other small accessories
  • Drawers lock with small key
  • Locking casters provide portability and stability

Standard Accessories

Standard Accessory List Coming Soon!

Optional Accessories

Optional Accessory List Coming Soon!

Catalogs

Catalog Coming Soon!
Manual Coming Soon!

Video Tutorials

Quick Comparison

SettingsKANGAROO JOEY CABINET WHITE removeCORNER CABINET removeDINGO II CUTTING & STORAGE CABINET WHITE removeDIVA CABINET removeGIDGET II TABLE removeAVA J EMBROIDERY CABINET remove
ImagekangaroojoeycabinetwhitecornersewingcabinetdingoIItablewhiteDivaCabinet Open WhiteAvaEmbroideryCabinet White open
SKUJOEY-WHITECORNER-WHITEDINGO-WHITEDIVA-CABINETGidget IIAVACABINET-WHITE
Rating
Price$2,499.00$1,199.00$2,199.00$3,999.00 $269.00$1,399.00
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionAre you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

Minimize your space with this unique corner cabinet with a sewing machine lift!

The dingo cutting table has an exceptional amount of storage that is the perfect addition to your sewing room.

The Diva Cabinets fold down quilt leaf makes this table ideal for large projects, and its caddy features a removable ironing pad, a cubby to fit an embroidery unit, and two additional drawers for  storage.

The Arrow Gidget II is an affordable table, that allows allows the sewer to have a greater workspace while sewing and or quilting. It's opening is larger than the Gidget I. This sturdy table allows a flat bed sewing experience  vs. a raised table that normally would come with your machine. This means the sewer or quilter will be more comfortable while sewing and having a great workspace. ****** PLEASE make sure you order your custom insert here  

The Ava J Embroidery Cabinet is specially made for large and heavy industrial machines the perfect fit for your Janome and Elna. With three storage drawers, two cubbies and a pull-out thread space capable of holding 49 standard embroidery spools, everything will have a perfect place on this table insuring to keep you organized.

Content

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

  • Kangaroo II Cabinet Dimensions
    • Open (quilt leaf out)
      • 55 ⅝” W x 40 ½” D x 29 ½ H
    • Closed
      • 55 ⅝” W x 21” D x 29 ½ H
  • Joey II Dimensions
    • 25 ¾” W x 16 ½” D x 24″ H
    • Top two drawer dimensions:
      • 22 ½ ” W x 13″ D x 2 ½” H
    • Bottom drawer dimensions:
      • 22 ½ ” W x 13″ D x 8″ H
  • Sewing Machines that Fit:
    • Supports sewing machines up to 55 pounds
      • Width: 23-3/4” (left to right)
      • Depth: 12-1/2” (front to back)
      • Height: 14-1/2”
    • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
  • Both products made from melamine laminate, MDF, and composite
  • Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

We are aware of the following sewing machines that are too large to fit into the Kangaroo II sewing cabinet (K8805 Teak and K8811 Ash White):
  • BabyLock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Janome – Horizon Memory Craft 15,000
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
  • Elna –  eXpressive 920
    • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
  • The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.
Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

SHIPPING INFORMATION

  • The cabinet is shipped ready to assemble in five boxes
  • Kangaroo II weighs a total of 156 pounds
  • Joey II weighs a total of 60 pounds
  • Arrow determines shipping carrier, FedEx or UPS
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

Assembly instructions are included with the cabinet. You may also download the Kangaroo II and Joey II manuals and save them to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet
  • Optional:
    • WD-40
    • Adjustable wrench
Minimize your space with this unique corner cabinet with a sewing machine lift!  

CABINET SPECIFICATIONS

  • Cabinet Dimensions:
    • 46 ½” W x 39” D x 30” H
      • Width is measured from back corner to right or left side
  • MOD Corner Cabinet is ideal for Sewing Machines:
    • Up to 45 pounds
    • Maximum Machine Dimensions:
      • Width: 23 ¾” (left to right)
      • Depth: 12 ½” (front to back)
      • Height: 14”
      • Sewing machine opening is beveled
    • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
  • The entire MOD Corner Cabinet features tough melamine laminate, MDF, and composite wood
  • Optional Custom Machine Insert for a flush surface (sold separately)

SEWING MACHINES THAT DO NOT FIT MOD CORNER CABINET

We are aware of the following sewing machines that are too large to fit into the MOD Corner Cabinet:
  • BabyLock – Destiny and Solaris
  • Brother – Dream VX8500D and Luminaire Innov-is XP1
  • Janome – Horizon Memory Craft 15,000
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
  • Elna –  eXpressive 920
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

SHIPPING INFORMATION

  • The Corner Cabinet is shipped ready to assemble in 2 separate boxes
  • MOD Corner Cabinet weighs a total of 117 pounds
  • Due to cabinet size, product shipped on a pallet via LTL
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUAL

Assembly instructions are included with the cabinet. You may also download the MOD Corner Cabinet manual and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer/mallet
  • Optional:
    • WD-40
    • Adjustable wrench

The dingo cutting table has an exceptional amount of storage that is the perfect addition to your sewing room.

CABINET DIMENSIONS

  • Dimensions Closed:
    • 46 ¼” W x 21 ¼” D x 35 ¼” H
  • Dimensions Open (leaf open):
    • 46 ¼” W x 40 ½” D x 34 ¼” H
  • Drawer Dimensions:
    • All nine drawers are19 ¾” W (left to right)
    • All nine drawers are 15” D (front to back)
    • Drawer Heights (top to bottom):
      • Seven of the drawers are 3 ¼” H
      • Bottom left drawer is 7 ⅛” H
      • Bottom right drawer is 12 ¼” H
        • The drawer is large enough to store a small serger with a weight limit of 20 pounds

SHIPPING INFORMATION

  • The Dingo II Cutting and Storage Cabinet is shipped ready to assemble in four separate boxes
  • The Dingo II Cutting and Storage Cabinet weights a total of 218 pounds
  • Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Dingo II Cutting and Storage Cabinet manual and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet

The Diva Cabinets fold down quilt leaf makes this table ideal for large projects, and its caddy features a removable ironing pad, a cubby to fit an embroidery unit, and two additional drawers for  storage.

CABINET SPECIFICATIONS

  • Cabinet Dimensions Open:
    • 69 ½” W x 43 ⅜ ” D  x 30” H
  • Cabinet Dimensions Closed:
    • 69 ½” W x 30” D x 30” H
  • Quilt Leaf:
    • 69 ½” W x 13 ⅜” D x ¾” H
  • Lift Opening:
    • 30 ⅜” W x 14 ¼” D x 16 ¾” H
  • Caddy Dimensions:
    • 34 ⅜” W x 28 ⅝” D x 25 ¼” H
  • Caddy Cubby:
    • 23 ⅜” W x 32” D x 28 ½” H
  • Caddy Small Drawer:
    • 29 ⅝” W x 14 ⅜” D x 3 ⅜ ” H
  • Caddy Large Drawer:
    • 29 ½ ” W x 15” D x 3 ¼” H

ASSEMBLY INSTRUCTIONS

Your Diva will arrive fully assembled, but please be sure to watch the following video before it arrives

Just like her younger sister (the Gidget I), the Gidget II Table is a self-contained, fully collapsible workstation. Once she arrives, you’ll be saying goodbye to the wiggles, wobbles and general woes of other sewing tables.

But that doesn’t mean she can’t easily be stored or transported. With velcro straps to secure her steel locking legs and dual-wheel roller design, transportation to classes, retreats and even your RV is a breeze.

What’s more, an increased opening size of 23 ½” W x 12 ½” D, means the Gidget II Table is capable of supporting a 45-pound machine!

Find out more about the Gidget II table below!

Table Specifications

  • Dimensions Open:
    • 40 ¼” W x 19 ¾” D x 28 ½” H
  • Dimensions with Legs Folded:
    • 40 ¼” W x 19 ¾” D x 4 ½” H
  • The Gidget II Table will accommodate sewing machines no larger than:
    • 23 ½” W (left to right)
    • 12 ¼” D (front to back)
    • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.

SHIPPING INFORMATION

The cabinet is fully assembled and shipping one box Gidget II weighs a total of 37 pounds Cabinets, tables, and chairs cannot be shipped to a PO Box If you wish to use the flat bed of the cabinet you must order the  custom insert here.  This  will be shipped separately and delivered three-eight  weeks later. This is custom made for each sewing machine.

COMPARE GIDGET I VS. GIDGET II

Gidget I has a smaller opening size (17 ½” W vs 7 ⅜” D) compared to the large opening on Gidget II (23 ½” W x 12” D). Gidget II Table features two wheels for easier portability when folded flat. Gidget I does not have wheels but can easily be transported with collapsible legs. Gidget I is made of particle board with steel locking legs. Gidget II is made with denser MDF (medium density fiberboard) and steel locking legs. Gidget II will require a  for her opening. Gidget I has a smaller opening, and may not need an insert if your machine is deep enough to fill most gaps.

The Ava J Embroidery Cabinet is specially made for large and heavy industrial machines the perfect fit for your Juki, Janome and Elna. With three storage drawers, two cubbies and a pull-out thread space capable of holding 49 standard embroidery spools, everything will have a perfect place on this table insuring to keep you organized.

We love paring the Ava cabinet with the JUKI/TAJIMA SAI 8 NEEDLE EMBROIDERY COMMERCIAL MACHINE

CABINET SPECIFICATIONS

  • Ava B Opening:
    • 12 ½” W
  • Ava J Opening:
    • 7 ½” W
  • Dimensions:
    • 35 ½” W x 23 ½” D X 35″ H
  • 2 Drawer Dimensions:
    • 26 ¾” W x 16″ D x 2″ H
  • Single Drawer Dimensions:
    • 13″ W x 16 ¼” D x 5 ½” H
  • 2 Cubby Dimensions:
    • 13″ W x 22 ¾” D x 7″ H
  • Side Storage Shelf Dimensions:
    • 3 ¼” W x 21 ¾” D x 6″ H

SHIPPING INFORMATION

  • The Ava ships ready to assemble in four boxes.
  • Ava weighs a total of 199 pounds
  • Arrow determines shipping carrier, FedEx or UPS
  • Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Ava Assembly Manual PDF file and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer/mallet
  • Optional:
    • WD-40
    • Adjustable wrench
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information