KANGAROO JOEY CABINET TEAK

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

• Kangaroo II Cabinet Dimensions
  • Open (quilt leaf out)
    • 55 ⅝” W x 40 ½” D x 29 ½ H
  • Closed
    • 55 ⅝” W x 21” D x 29 ½ H
• Joey II Dimensions
  • 25 ¾” W x 16 ½” D x 24″ H
  • Top two drawer dimensions:
    • 22 ½ ” W x 13″ D x 2 ½” H
  • Bottom drawer dimensions:
    • 22 ½ ” W x 13″ D x 8″ H
• Sewing Machines that Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23-3/4” (left to right)
    • Depth: 12-1/2” (front to back)
    • Height: 14-1/2”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Both products made from melamine laminate, MDF, and composite
• Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

• BabyLock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five boxes
• Kangaroo II weighs a total of 156 pounds
• Joey II weighs a total of 60 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Optional:
  • WD-40
  • Adjustable wrench

The Diva Cabinets fold down quilt leaf makes this table ideal for large projects, and its caddy features a removable ironing pad, a cubby to fit an embroidery unit, and two additional drawers for  storage.

CABINET SPECIFICATIONS

• Cabinet Dimensions Open:
  • 69 ½” W x 43 ⅜ ” D  x 30” H
• Cabinet Dimensions Closed:
  • 69 ½” W x 30” D x 30” H
• Quilt Leaf:
  • 69 ½” W x 13 ⅜” D x ¾” H
• Lift Opening:
  • 30 ⅜” W x 14 ¼” D x 16 ¾” H
• Caddy Dimensions:
  • 34 ⅜” W x 28 ⅝” D x 25 ¼” H

• Caddy Cubby:
  • 23 ⅜” W x 32” D x 28 ½” H
• Caddy Small Drawer:
  • 29 ⅝” W x 14 ⅜” D x 3 ⅜ ” H
• Caddy Large Drawer:
  • 29 ½ ” W x 15” D x 3 ¼” H

ASSEMBLY INSTRUCTIONS

This all in one storage cube with over sixty thread holders, five shelves and two rods for hanging and storing ribbon is the ideal storage compartment your sewing room needs to help you stay organized.

CABINET DIMENSIONS

• Storage Cube Dimensions:
  • 21” W x 19 ¾” D x 29 1/4” H
• Adjustable Shelf Dimensions:
  • 9 ½” W x 8 ¼” D
• Available Finish: White
• The Storage Cube features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The Storage Cube is shipped ready to assemble in one box
• The Storage Cube ships via UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

• • 50 ¾” W x 17 ¼” D x 29 ½” H
• Cabinet Closed:
  • 25 ½” W x 17 ¼” D x 30 1/8” H
• Lift Opening, A10:
  • 20 15/16” W x 11 3/8” D x Adjustable Height

• Construction: Vinyl laminate/MDF/Composite
• Dual-Hydraulic Lift Weight Limit: 55 #s
• Custom Machine Insert Available for machines less than 17-1/2″ wide by 12-1/2″ deep

SEWING MACHINES THAT DO NOT FIT JUDY

• Baby Lock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Elna – 920 eXpressive
• Janome – Horizon Memory Craft 15,000 & Continental M7
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flat bed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flat bed position.

CABINET SPECIFICATIONS

• Cabinet Dimensions:
  • 46 ½” W x 39” D x 30” H
    • Width is measured from back corner to right or left side
• MOD Corner Cabinet is ideal for Sewing Machines:
  • Up to 45 pounds
  • Maximum Machine Dimensions:
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14”
    • Sewing machine opening is beveled
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire MOD Corner Cabinet features tough melamine laminate, MDF, and composite wood
• Optional Custom Machine Insert for a flush surface (sold separately)

SEWING MACHINES THAT DO NOT FIT MOD CORNER CABINET

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

SHIPPING INFORMATION

• The Corner Cabinet is shipped ready to assemble in 2 separate boxes
• MOD Corner Cabinet weighs a total of 117 pounds
• Due to cabinet size, product shipped on a pallet via LTL
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUAL

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

• Kangaroo II Cabinet Dimensions
  • Open (quilt leaf out)
    • 55 ⅝” W x 40 ½” D x 29 ½ H
  • Closed
    • 55 ⅝” W x 21” D x 29 ½ H
• Joey II Dimensions
  • 25 ¾” W x 16 ½” D x 24″ H
  • Top two drawer dimensions:
    • 22 ½ ” W x 13″ D x 2 ½” H
  • Bottom drawer dimensions:
    • 22 ½ ” W x 13″ D x 8″ H
• Sewing Machines that Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23-3/4” (left to right)
    • Depth: 12-1/2” (front to back)
    • Height: 14-1/2”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Both products made from melamine laminate, MDF, and composite
• Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

• BabyLock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five boxes
• Kangaroo II weighs a total of 156 pounds
• Joey II weighs a total of 60 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Optional:
  • WD-40
  • Adjustable wrench