KANGAROO JOEY CABINET TEAK

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

• Kangaroo II Cabinet Dimensions
  • Open (quilt leaf out)
    • 55 ⅝” W x 40 ½” D x 29 ½ H
  • Closed
    • 55 ⅝” W x 21” D x 29 ½ H
• Joey II Dimensions
  • 25 ¾” W x 16 ½” D x 24″ H
  • Top two drawer dimensions:
    • 22 ½ ” W x 13″ D x 2 ½” H
  • Bottom drawer dimensions:
    • 22 ½ ” W x 13″ D x 8″ H
• Sewing Machines that Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23-3/4” (left to right)
    • Depth: 12-1/2” (front to back)
    • Height: 14-1/2”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Both products made from melamine laminate, MDF, and composite
• Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

• BabyLock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five boxes
• Kangaroo II weighs a total of 156 pounds
• Joey II weighs a total of 60 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Optional:
  • WD-40
  • Adjustable wrench

This never ending workspace is what you didn't know you needed in your sewing or craft room, The cabinet, quilt leaf and rolling caddy included offers 31 ½ square feet, ensuring you have enough room to take on bigger projects.

This cabinet comes in both Teak and Ash White.

CABINET SPECIFICATIONS

• Open Cabinet Dimensions:
  • Quilt leaf open & rolling caddy extended in front:
    • 100 ½” W x 80 ¼” D x 29 ½” H
  • Quilt leaf folded down and the rolling caddy is tucked away:
    • 100 ½” W x 22 ¼” D x 29 ½” H
  • Closed Dimensions:
    • 49 ¾” W x 22 ¼” D x 30 ¼” H
• Caddy Dimensions:
  • 13 ⅜” W x 16″ D x 13 ½ ” H
  • Drawer Dimensions (two drawers)
    • 11″ W x 11 ⅛” D x 2 ¾” H
• Door Bin Dimensions:
  • Large: 17″ W x 5 ¼” D x 5 ¼” H
  • Small: 17” W x 3 ⅛” D x 3 ⅛” H
• Aussie II is ideal for Sewing Machines:
  • Up to 55 pounds
  • Maximum Machine dimensions:
    • Width: 23 ¾”  (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire Aussie II features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT INTO THE AUSSIE II

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna – eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

CABINET SPECIFICATIONS

• Open Cabinet Dimensions:
  • Quilt leaf open & rolling caddy extended in front:
    • 100 ½” W x 80 ¼” D x 29 ½” H
  • Quilt leaf folded down and the rolling caddy is tucked away:
    • 100 ½” W x 22 ¼” D x 29 ½” H
  • Closed Dimensions:
    • 49 ¾” W x 22 ¼” D x 30 ¼” H
• Caddy Dimensions:
  • 13 ⅜” W x 16″ D x 13 ½ ” H
  • Drawer Dimensions (two drawers)
    • 11″ W x 11 ⅛” D x 2 ¾” H
• Door Bin Dimensions:
  • Large: 17″ W x 5 ¼” D x 5 ¼” H
  • Small: 17” W x 3 ⅛” D x 3 ⅛” H
• Aussie II is ideal for Sewing Machines:
  • Up to 55 pounds
  • Maximum Machine dimensions:
    • Width: 23 ¾”  (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire Aussie II features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in 5 separate boxes
• Aussie II weighs a total of 235 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

This all in one storage cube with over sixty thread holders, five shelves and two rods for hanging and storing ribbon is the ideal storage compartment your sewing room needs to help you stay organized.

CABINET DIMENSIONS

• Storage Cube Dimensions:
  • 21” W x 19 ¾” D x 29 1/4” H
• Adjustable Shelf Dimensions:
  • 9 ½” W x 8 ¼” D
• Available Finish: White
• The Storage Cube features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The Storage Cube is shipped ready to assemble in one box
• The Storage Cube ships via UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

Just like her younger sister (the Gidget I), the Gidget II Table is a self-contained, fully collapsible workstation. Once she arrives, you’ll be saying goodbye to the wiggles, wobbles and general woes of other sewing tables.

But that doesn’t mean she can’t easily be stored or transported. With velcro straps to secure her steel locking legs and dual-wheel roller design, transportation to classes, retreats and even your RV is a breeze.

What’s more, an increased opening size of 23 ½” W x 12 ½” D, means the Gidget II Table is capable of supporting a 45-pound machine!

Find out more about the Gidget II table below!

Table Specifications

• Dimensions Open:
  • 40 ¼” W x 19 ¾” D x 28 ½” H
• Dimensions with Legs Folded:
  • 40 ¼” W x 19 ¾” D x 4 ½” H
• The Gidget II Table will accommodate sewing machines no larger than:
  • 23 ½” W (left to right)
  • 12 ¼” D (front to back)
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.

SHIPPING INFORMATION

COMPARE GIDGET I VS. GIDGET II

The Ava J Embroidery Cabinet is specially made for large and heavy industrial machines the perfect fit for your Juki, Janome and Elna. With three storage drawers, two cubbies and a pull-out thread space capable of holding 49 standard embroidery spools, everything will have a perfect place on this table insuring to keep you organized.

CABINET SPECIFICATIONS

• Ava B Opening:
  • 12 ½” W
• Ava J Opening:
  • 7 ½” W
• Dimensions:
  • 35 ½” W x 23 ½” D X 35″ H
• 2 Drawer Dimensions:
  • 26 ¾” W x 16″ D x 2″ H
• Single Drawer Dimensions:
  • 13″ W x 16 ¼” D x 5 ½” H
• 2 Cubby Dimensions:
  • 13″ W x 22 ¾” D x 7″ H
• Side Storage Shelf Dimensions:
  • 3 ¼” W x 21 ¾” D x 6″ H

SHIPPING INFORMATION

• The Ava ships ready to assemble in four boxes.
• Ava weighs a total of 199 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench

Allowing you to cut, sew and iron all in one spot, the Ginger cabinet offers five drawers and four cubbies to store your thread and accessories. On the far left, you will cut your fabric, in the middle you will sew your project and on the right you will iron with the built in ironing board.

CABINET SPECIFICATIONS

• Cabinet Dimensions:
  • Open: 61 ¼” W x 31 ½” D x 29 ½” H
  • Closed: 48 ½” W x 31 ½” D x 29 ½” H
• Drawer (x3) Dimensions:
  • 4 ⅜” W x 12” D x 3 ½” H
• Shelf (x4) Dimensions:
  • 11 ¾” W x 7 ½” D x 6 1⁄4 ” H
• Cutting Mat Dimensions:
  • 23” W x 17” D
• Ginger Cabinet is ideal for Sewing Machines:
  • Up to 45 pounds
  • Maximum Machine Dimensions:
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Sewing machine opening is beveled
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The Ginger features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT GINGER SEWING CABINET

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

• Storage includes:
  • Five drawers located on the front left
    • Top two hold thread pegs which hold 24 thread spools each (48 total)
    • Bottom three are single compartments for other storage
  • Four shelves located on the left side

SHIPPING INFORMATION

• The cabinet is shipped LTL, ready to assemble in three separate boxes
• Ginger weighs a total of 165 pounds
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later