juki1508N

Juki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine

$3,599.00

The Juki LU-1508N series is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for
general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

SKU: JUKI-1508N Category: Tags: , , , , , , ,

Description

1-Needle, Unison Feed, Lockstitch Machine With Vertical-axis Large Hook

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar stroke of 38mm and long 190R needle, the compound feed machine supports the sewing of extra heavy materials. The walking foot machine comes with an extra-large steel handwheel with a diameter as large as φ175.

A new feed mechanism with a rectangular feeding motion prevents stitch gathering

The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering.

The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.

The alternating vertical movement mechanism prevents irregular stitches

The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes.

Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches.

The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of the material.

Consistent seam quality

With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors.

With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.

Higher lift of the presser foot

The high, 16mm foot lift enables easy material handling.

The machine comes with a dual-tension mechanism

The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.

The highly efficient vertical-axis double-capacity hook is equipped as standard

With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.

Improved operability

The stitch length can be easily selected by the stitch dial.

The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160).

A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.)

The machine is a full-open-type top design that makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head.

The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

Standard Features

  • A new feed mechanism with a rectangular feeding motion prevents stitch gathering
  • The alternating vertical movement mechanism prevents irregular stitches
  • Consistent seam quality
  • Higher lift of the presser foot
  • The machine comes with a dual-tension mechanism
  • The highly efficient vertical-axis double-capacity hook is equipped as standard
  • Improved operability

Standard Accessories

Standard Accessory List Coming Soon!

Optional Accessories

Optional Accessory List Coming Soon!

Catalogs


Machine Catalog

Machine Manual

Video Tutorials

Quick Comparison

Juki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine removeJUKI DDL-9000C Series Industrial Machine removeMagna-Glide Delights in Warm Grey 4 Style L- 72 yds. removeCairo Quilt Essential Bundle - 4pcs. removeJuki LS-1341 Cylinder Bed Industrial Sewing Machine removeStitch in the Ditch Quilting Foot remove
NameJuki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine removeJUKI DDL-9000C Series Industrial Machine removeMagna-Glide Delights in Warm Grey 4 Style L- 72 yds. removeCairo Quilt Essential Bundle - 4pcs. removeJuki LS-1341 Cylinder Bed Industrial Sewing Machine removeStitch in the Ditch Quilting Foot remove
Imagejuki1508NDDL9000MAIN10WG4 Warm Grey 4 MGDLcairoquiltessential 4pcsUntitled 1 x 1 inintheditchfoot
SKUJUKI-1508NDDL-9000CSeriesMGDL.10WG4CAIROESS-4PCSJUKILS1341JANOME-767824109
Rating
Price$3,599.00$2,199.99 – $2,799.99$14.49$33.99$5,200.00 – $5,399.00$18.99
Stock

3 in stock

11 in stock

1 in stock

Availability3 in stock11 in stock1 in stock
Add to cart

Add to cart

Select options

Add to cart

Add to cart

Select options

Add to cart

DescriptionThe Juki LU-1508N series is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.		Direct-drive, high-speed, sewing system with automatic thread trimmer Commitment to “seam quality” is poised to enter a new era with JUKI’s next-generation sewing system. The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience. Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly suit the materials being sewn. What's the difference between the heavier models such as the Juki DDL-9000 FSH -Juki DDL-9000 SSH and the Juki DDL-9000 FMS- DDL-9000 SMS.  These models that have an H  are dedicated to Heavy-Weight sewing only. These models have more aggressive feed dogs, stronger needle bar stroke, and the needle sizes are larger such as a range from  #20-23. The standard needle size that comes with the machine is a 21. The models without the H have a needle range capability from 9-18. It is recommended to speak to our Industrial Machine Specialist when buying industrials. Freight Charges Apply: After your purchase we will contact you with the final freight amount. Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

Glide 40wt. trilobal polyester thread on Fil-tec's original magnetic core bobbin. Used for sewing, quilting and embroidery. JAR OF 20 BOBBINS.Bundle includes: White, Linen, Light Grey, and Black.The LS Series offers a consistent stitching pitch and outstanding ability to sew sharp curves. This makes the machine ideal for sewing tubular articles.

Freight Charges Apply:

After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck. Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.		This foot is from Janome, and was designed to fit the Janome Hd9, and 1600P which are high shank machines. You know what is also a high shank machine? The Juki TL machines! We only offer the best of the best for you all, and we test everything and make sure to set you up for success before making any claims, or selling any off brand or not true Juki parts. This is compatible with:
  • Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.
 
Content

1-Needle, Unison Feed, Lockstitch Machine With Vertical-axis Large Hook

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar stroke of 38mm and long 190R needle, the compound feed machine supports the sewing of extra heavy materials. The walking foot machine comes with an extra-large steel handwheel with a diameter as large as φ175.

A new feed mechanism with a rectangular feeding motion prevents stitch gathering

The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering. The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.

The alternating vertical movement mechanism prevents irregular stitches

The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes. Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches. The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of the material.

Consistent seam quality

With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors. With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.

Higher lift of the presser foot

The high, 16mm foot lift enables easy material handling.

The machine comes with a dual-tension mechanism

The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.

The highly efficient vertical-axis double-capacity hook is equipped as standard

With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.

Improved operability

The stitch length can be easily selected by the stitch dial. The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160). A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.) The machine is a full-open-type top design that makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head. The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

DDL-9000C Series

Direct-drive, high-speed, sewing system with automatic thread trimmer

Commitment to “seam quality” is poised to enter a new era with JUKI’s next-generation sewing system. The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience. Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly suit the materials being sewn.

Vertically- and horizontally-driven digital feed mechanism

Thanks to the world's first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease according to the material fabric of product to be sewn, thereby improving seam quality. Thanks to this digital feed mechanism, thread trimming is carried out with the feed dog lowered in the case the shorter-thread remaining thread trimming function is enabled. As a result, the clearance provided between the throat plate and the material is eliminated, thereby stabilizing the length of thread remaining after thread trimming. The feed dog does not protrude the top surface of throat plate when the sewing machine stops with its needle bar up, thereby facilitating placement/removal of the material on/from the top surface of throat plate and preventing the material from being damaged by the feed dog.

Various kinds of feed locus can be selected.

Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn.

Digital functions which accentuate excellent "seam" quality

Ⅰ. Adoption of the needle-thread active tension - Needle tension is digitally controlled
Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this the DDL-900C, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Example: Needle-thread active tension demonstrates its effectiveness in the topstitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.
Ⅱ. Active presser foot pressure mechanism - The presser foot pressure is digitally controlled
The DDL-9000C has a digital control system that controls the presser foot pressure. Under the automatic mode, the multi-layered section detection function detects changes in material thickness to increase/decrease the presser foot pressure accordingly. Under the manual mode, the presser foot pressure control function is assigned to the hand switch to enable operation with the hand switch.
Ⅲ. Needle thread clamp
The device clamps the needle thread and draws it under the material at the beginning of sewing. The needle thread clamp device works to reduce the size of thread tangling in on the wrong side of the material. This expands the area around the needle entry, thereby allowing the use of various gauge components.

Management of sewing performance and the DDL-9000C sewing machine by the utilization of IoT (Internet of Things)

Management, browsing and editing of data can be carried out on the application software

Data on the DDL-9000C sewing machine adjustments made according to the product to be sewn can be transferred to a commercially-available Android tablet in contactless mode. This enables quick check for uniform settings as well as confirmation of conditions of sewing machines in a sewing line, thereby facilitating setup changes. The operation panel is also provided as standard with a USB port. Data management and software update can be carried out with ease using a USB thumb drive. Data items of sewing can be numerically managed to ensure "stable quality" and "reduction in time required for setup changes". Quantified sewing data can be externally taken from the sewing machine using an Android tablet or USB thumb drive.

LED Light on the DDL-9000C

The LED light illuminates the needle entry area in the just-under direction from the right and left sides of the needle bar. In comparison with the single-direction illumination, this LED light helps the operator carry out sewing more easily. Illuminance of the LED light is adjustable in five levels. It can also be used as an auxiliary lamp for working.
MODEL DDL-9000C-FMS DDL-9000C-FSH DDL-9000C-SMS DDL-9000C-SSH
Type Full Digital Type Digital Type
Application Medium-weight Heavy-weight Medium-weight Heavy-weight
Lubrication Semi-dry Minute-quantity lubrication Semi-dry Minute-quantity lubrication
Max. sewing speed 5,000sti/min*1 4,500sti/min*2 5,000sti/min*1 4,500sti/min*2
Hand switch Provided as standard (At the time of shipment: Hand switches are assigned respectively with the touch-back switch function and the one-touch changeover switch function.)
Max. stitch length 5mm
Thread trimming method Double-edge rotary system
Needle bar stroke 30.7mm 35.0mm 30.7mm 35.0mm
Feed dog height 0.8mm 1.2mm 0.8mm 1.2mm
Needle thread tension Active tension Spring type
Presser foot pressure Electronic control Spring type
Needle*3 DB×1・DB×5（#11 #9～18（Nm65～110） DB×1・DB×5（#21） #20～23（Nm125～160） DB×1・DB×5（#11） #9～18（Nm65～110） DB×1・DB×5（#21） #20～23（Nm125～160）
Lift of the presser foot By hand: 5.5mm, By knee: 15mm Auto: 1st stage 5.0 mm （*0.1～8.5mm）, 2nd stage 8.5 mm （*8.5mm～13.5mm） * Adjustable on the operation panel
Bobbin thread winder Built in the top of machine head (provided with the bobbin thread retaining plate)
Lubricating oil JUKI New Defrix Oil No. 1 or JUKI CORPORATION GENUINE OIL 7 (equivalent to ISO VG7)
Size of bed 517×178mm（distance from needle to machine arm：303mm）
Machine head drive Compact AC servomotor (400W) that is directly connected to the main shaft (direct-drive system)
Power consumption 520VA
Net weight Machine head： 40.5kg（with AK-154）
＊"sti/min" stands for "Stitches per Minute." ＊1 Stitch length of 4.00 mm or less: 5,000 sti/min; Stitch length of 4,05 - 5.00 mm: 4,000 sti/min ＊2 Stitch length of 4.00 or less: 4,500sti/min; Stitch length of 4.05 - 5.00mm: 4,000sti/min ＊3 Differs on a destination-by-destination basis The walking foot, Bobbins, Bobbin Case, throat plate, and needles of the Juki TL models are NOT compatible with the Juki DDL-9000C, but the rest of the feet and accessories are. Please see list of compatible items below: Feet:  Bag Makers Recommendation for Vinyls: https://jukijunkies.com/product/smooth-foot/ Needles: https://jukijunkies.com/product/juki-dbx110x18-needles/ https://jukijunkies.com/product/juki-dbx110x14-needles/ Bobbins : https://jukijunkies.com/product/juki-bobbin-22964001-5-pk/ In this LINK: https://jukijunkies.com/wp-content/uploads/machine-pdfs/catalogs/DDL9000C_catalog.pdf you will see a chart with SPECIFICATIONS ON the bottom right. Get to know this. This chart is on this page too.     		Magna-Glide Delight Style L bobbin is a pre-wound bobbin from Fil-tec that uses Glide 40 weight trilobal polyester thread. The magnetic core of the bobbin provides an even tension that is consistent from beginning to end. No more manual adjustments of tension as your bobbin gets smaller! The magnetic core also prevents backlash and over-spin as well. Because Magna-Glide uses Glide 40wt. colors, your top and bottom are a perfect match; just refer to your Glide Color Chart to coordinate your colors. One of the best parts about these bobbins is that they are virtually lint free so you can spend more time sewing and less time cleaning your machine. Because the bobbin is a Style L, this makes the bobbin compatible with almost all sewing machines, especially our Juki computerized and mechanical machines. For the best use, please take these into consideration:
  • Colors may appear differently on the computer than they do in person. Please refer to the Glide Color Chart for the most accurate color reference.
  • Make sure the magnet side of the bobbin is inserted down into the care for accurate use.
  • Remember to remove the check spring from the metal bobbin before using. Failure to do so may lead to tension issues and thread breaks.
Introducing the Cairo Quilt 4 pc Essential Bundle, curated in honor of most loyal Juki Junkies, Royce! Cairo Quilt thread is 50w Egyptian mercerized cotton thread that is strong and durable. Ideal for flat piecing. Experience a high-quality thread, that makes your stitches look amazing and your machine happy. Colors Include: White Linen Light Grey BlackThe LS Series offers a consistent stitching pitch and outstanding ability to sew sharp curves. This makes the machine ideal for sewing tubular articles. Freight Charges Apply: After your purchase we will contact you with the final amount. Please select Freight Charges Starting at: $299.00  upon check out to select the minimum charge.  Features: Sewing capabilities and feed performance that respond to a broad range of uses in the sewing of heavy materials. With its larger needle bar stroke, larger lift of the presser foot, and newly adopted double-tension mechanism, the machine sews beautifully with thick threads (low count thread) and at higher thread tensions. This allows the machine to sew a broad range of heavy materials. The Space Saver Stand options allows the machine bed to stick out from the left hand side of the table allowing an opening or free arm advantage. This table is 20 x 27. Regular Table is  20x48
LENGHT AND CIRCUMFERENCE OF CYLINDER: DIAMETER 72 MM....LENGTH IS ABOUT 10 INCHES
The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance. In addition, the ratio between the alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes. With this feature, the machine sews multi-layered parts of the material consistently and without stitch gathering. The machine is equipped as standard with a mechanism to correct uneven material feed by making-micro adjustments to the bottom-feed. Compared with the elliptical feed, the rectangular feed helps reduce gathered stitches. The slimmed-down throat plate easily adjusts to the sewing of small tubular articles with diameters as small as φ40mm. This enhances the machine's ability to smoothly sew not only bags and shoes, but also small article such as wallets. The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance.   ls1340_brochure ls1340_catalog

This foot is from Janome, and was designed to fit the Janome Hd9, and 1600P which are high shank machines. You know what is also a high shank machine? The Juki TL machines! We only offer the best of the best for you all, and we test everything and make sure to set you up for success before making any claims, or selling any off brand or not true Juki parts.

This high shank in the ditch foot will fit the Juki TL models including the Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

WeightN/A90 lbsN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 90 lbs
Select your Machine Model

DDL-9000C-FMS, DDL-9000C-FSH, DDL-9000C-SMS, DDL-9000C-SSH
Specifications

Type: Full digital type
Application: Medium-weight
Lubrication: semi-dry
Max. sewing speed: 5,000sti/min*1
Max. stitch length: 5mm
Needle bar stroke: 30.7mm
Feed dog height: 0.8mm
Needle : DB×1・DB×5（#11）#9～18（Nm65～110)
Size of bed: 517x178mm (distance from needle to machine arm: 303mm)
Power consumption: 520VA
Net weight: 90lbs. (machine head)
Want Casters?

Yes, Please, No, Thanks
Color

Size

Machine Type

Specifications

Select Package

LS-1341 + Space Saver Table, LS-1341 + Regular Table
Machine Type

Machine

, , , ,

Related products