Juki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine

The Juki LU-1508N series is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for
general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Description

1-Needle, Unison Feed, Lockstitch Machine With Vertical-axis Large Hook

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar stroke of 38mm and long 190R needle, the compound feed machine supports the sewing of extra heavy materials. The walking foot machine comes with an extra-large steel handwheel with a diameter as large as φ175.

A new feed mechanism with a rectangular feeding motion prevents stitch gathering

The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering.

The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.

The alternating vertical movement mechanism prevents irregular stitches

The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes.

Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches.

The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of the material.

Consistent seam quality

With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors.

With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.

Higher lift of the presser foot

The high, 16mm foot lift enables easy material handling.

The machine comes with a dual-tension mechanism

The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.

The highly efficient vertical-axis double-capacity hook is equipped as standard

With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.

Improved operability

The stitch length can be easily selected by the stitch dial.

The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160).

A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.)

The machine is a full-open-type top design that makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head.

The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

Additional information

Specifications

Application: Heavy-weight
Max. Sewing Speed: 2,500spm
Max. Stitch Length: 9mm (forward/backwards)
Lift of Presser Foot: By hand: 9mm, By knee: 16mm (max.)
Auto-lifter: optional
Alternating Vertical Movement: 2.5mm~6.5mm
Thread Take-Up: slide type
Hook: Vertical-axis double-capacity hook
Needle at Time of Delivery: 135×17 (Nm160) Nm125~Nm180
Locus of Feed: Rectangular feed
Needle Thread Tension box: Dual-tension method
Pitch Changing Method: by dial
Bobbin Thread Winder: built on the machine head
Knee-Lifter Mechanism: built on the machine head
Safety Mechanism: Provided as standard (reset with the push of a button)
Lubrication: Centralized oil wick lubrication (hook: automatic)
Lubricating Oil: JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Distance From Needle to Machine Arm: 10 inches
Bed Size: 20 inches x 7 inches
Weight of Machine Head: 93.7 lbs

Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

Standard Features

  • A new feed mechanism with a rectangular feeding motion prevents stitch gathering
  • The alternating vertical movement mechanism prevents irregular stitches
  • Consistent seam quality
  • Higher lift of the presser foot
  • The machine comes with a dual-tension mechanism
  • The highly efficient vertical-axis double-capacity hook is equipped as standard
  • Improved operability

Standard Accessories

Standard Accessory List Coming Soon!

Optional Accessories

Optional Accessory List Coming Soon!

Catalogs

Video Tutorials

Quick Comparison

SettingsJuki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine removeJuki DDL-8700 Single Needle Straight Lockstitch Sewing Machine removeJuki LU-1560N Double Needle Unison Feed Walking Foot Industrial Sewing Machine and Servo Motor removeJuki Miyabi J-350QVP Sit Down Long Arm Quilting Machine removeJuki MF7523 3-Needle Coverstitch Industrial Sewing Machine removeExtension Table Set for MO-2800 Serger remove
Imagejuki1508NjukiLU1560juki mf7523MO2800extensiontable
SKUJUKI-1508NJUKI- DDL 8700LU-1560NJUKI-J350QVPJUKI-MF7523JUKI-40266709
Rating
Price$829.99$1,157.99$3,999.00$6,499.00$2,349.00$89.99$99.99
Stock

In stock (can be backordered)

Out of stock

AvailabilityIn stock (can be backordered)Out of stock
Add to cart

Read more

Select options

Add to cart

Add to cart

Read more

Select options

DescriptionThe Juki LU-1508N series is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

The Juki DDL 8700 is a sewing machine that can help you complete sewing projects fast and easy,  This sewing machine can sew up to 5,500 stitches per minute. The maximum stitch length of this sewing machine is 5mm which provides greater freedom in completing your sewing tasks.

Freight Charges Apply: After your purchase, we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table comes assembled This item ships from our warehouse. Item is shipped by freight in a semi truck.

Juki LU-1560N: The ideal machine for car seats, sofas, golf carts and even bags; two continuous stitches side by side a 1/4" apart. Need stitches wider? Let us know so we can modify it for you. The needle gauge can be prepped at 3/16, 1/4, 5/16, 3/8, or 1/2 an inch. 

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select "Freight Charges" upon check-out starting at $299.00; the minimum charge. 

Named Miyabi, "elegance" in Japanese after JUKI's rich heritage, the J-350QVP lives by its name with the built-in JUKI SmartStitch stitch regulator system! For details of pricing, please call the shop at 813-661-9000 or send us an email at sewingmachines411@gmail.com. Discover true elegance with the built-in stitch regulator JUKI SmartStitch Freight Charges Apply: After your purchase we will contact you with the amount. Please select PENDING FREIGHT CHARGES upon check out. 

3-Needle Coverstitch Industrial Sewing Machine Comes With Table, Legs, Servo Motor and LED Lamp.

The machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear.

Freight Charges Apply:

After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck. DELIVERIES to Hawaii are suggested unassembled.
The Extension Table Set features a high-quality smooth acrylic top with adjustable legs. The extended work area allows for more space when working on a large project. In addition, the see-through table top allows you to store accessories underneath. This set comes with a push pin to pin down your fabric and easily sew circles.
Content

1-Needle, Unison Feed, Lockstitch Machine With Vertical-axis Large Hook

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar stroke of 38mm and long 190R needle, the compound feed machine supports the sewing of extra heavy materials. The walking foot machine comes with an extra-large steel handwheel with a diameter as large as φ175.

A new feed mechanism with a rectangular feeding motion prevents stitch gathering

The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering. The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.

The alternating vertical movement mechanism prevents irregular stitches

The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes. Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches. The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of the material.

Consistent seam quality

With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors. With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.

Higher lift of the presser foot

The high, 16mm foot lift enables easy material handling.

The machine comes with a dual-tension mechanism

The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.

The highly efficient vertical-axis double-capacity hook is equipped as standard

With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.

Improved operability

The stitch length can be easily selected by the stitch dial. The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160). A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.) The machine is a full-open-type top design that makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head. The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

The Juki DDL-8700 High-speed Single Needle Straight Lockstitch Industrial Sewing Machine with Table and Servo Motor

Newly designed machine head that was developed in pursuit of beauty, This machine inherits desirable features, such as high-speed stitching performance 5,500SPM, extreme stitching performance, ease of operation, and reliability, from the highly evaluated previous JUKI lockstitch machines. The higher lift of the presser foot lifts up to 13mm/ 0.512" making it ideal for medium weight and lightweight fabrics. Exceptional for tailors, fashion designers, and dressmakers. The machine has a 10.5 inch throat.  The 110-volt servo motor isn’t only quieter and powerful but stitching speed can be controlled by a variable rheostat dial with a span from 0 to 3300 RPM.  

Recommended for:  Light to medium weight fabrics.  The heaviest would be 3 layers of denim. Perfect for quilters that would to piece with speed. 

  This Juki DDL-8700 works great for alterations and dress making.

This product weighs 28 Ibs, machine comes disassembled.  The machine provides a great amount of arm space . Therefore, you will never feel limited when performing a stitch task. This also will enable you to complete larger and spacious sewing tasks. The machine unit includes a dual-spool thread stand and an individually installed bobbin winder. The unit includes a great knee lifter at the bottom that can be utilized to lower or raise the foot. All you have to do is add the belt to the motor, assemble spool holder and tension dials.  Additionally,  machine needs to be dropped into table with safety clips. Returns: Due to the delivery and size of the machine returns are not accepted.  Variations: Due to the nature of industrial sewing machines table colors may vary. Disclaimer: Industrial machines are tough, but due to their weight there may be some minor scratches on the head or the table during shipping. This is normal when shipping industrial sewing machines.

Delivery: Juki DDL-8700 Curbside delivery by freight. The table comes assembled on a palette and the machine in a box.

Freight Charges Apply: After your purchase we will contact you with the final amount. Please select Freight Charges Starting at: $299.00  upon check out to select the minimum charge.  For additional information we recommend you look at the brochure below this section and the features tab. 

Juki LU-1560N: The ideal machine for car seats, sofas, golf carts and even bags; two continuous stitches side by side a 1/4"

The Juki LU-1560N unique feed mechanism promises excellent efficiency of feed. In addition to the standard models of 2-needle machines, other models intended for special purposes are available, one having a thread trimmer. The machine is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity.

The higher lift of the presser foot lifts up to 16mm by knee and 9mm by hand making ideal for heavy layers of material. The machine delivers increased productivity at a sewing speed as high as 2,500 Stitches per minute  with a throat space of 517mm×178mm.

This machine has the option of a needle positioner and/or casters for an additional fee. Please select option when adding product to cart.

Freight Charges Apply: After your purchase we will contact you with the final amount. Please select Freight Charges Starting at: $299.00  upon check out to select the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck. DELIVERIES to Hawaii are suggested unassembled.

Improved Provability for the Juki LU-1650N

  • The stitch length can be easily selected by the stitch dial.
  • The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160).
  • A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.)
  • The machine is full-open-type top design makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head.
  • The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

The area around the needle entry is designed to be easily observed (LU-1560N-7, LU-1561N-7)

Since the needle thread tension-release solenoid is fitted on the rear face of the machine head, the area around the needle entry and one-touch type reverse feed button is easily viewable. This substantially contributes to improved operability.

The walking foot and presser foot's alternating vertical movement can be set and changed with ease (LU-1560N-7, LU-1561N-7)

  • The vertical strokes of the presser foot and walking foot (their alternating vertical movement) can be easily changed using a large dial mounted on the top surface of the machine head.
  • In addition the sewing speed is automatically adjusted with the set value. With this feature, ideal sewing conditions are maintained at all times.
  • The machine is equipped with an instantaneous changeover device for alternating the vertical movement amount of the walking foot and presser foot, which demonstrates its capability for processes involving sewing products with a lot of multi-layered portions.

A helpful automatic reverse feed function is provided as standard (LU-1560N-7, LU-1561N-7)

  • With just a light press on the one-touch type reverse feed button, reverse feed stitching is actuated. Furthermore if a suspended ruler is attached on the machine or a 3-dimensional sewing product is sewn, the button can be shifted upward to prevent interruption.
  • The auto-lifter (pedal switch type) helps to increase efficiency by reducing operator fatigue.

Thread trimming without fail (LU-1560N-7, LU-1561N-7)

The machine leaves a shorter needle thread after thread trimming, improving thread consumption efficiency. With a rigid knife and improved cam shape, the thread trimmer cuts thread as thick as #5 without fail.
  • Bottom-feed micro-adjustment mechanism is provided as standard (LU-1510N-7, LU-1511N-7)

    The 1-needle type machine is equipped with a bottom-feed micro-adjustment mechanism with the needle feed amount fixed. This helps prevent irregular stitches which are free from pitch errors.
 

Introducing the only sit-down longarm quilter with automatic thread trimmers, JUKI's Miyabi J-350QVP S, a sit-down free motion quilting machine! Named Miyabi, "elegance" in Japanese after JUKI's rich heritage, the J-350QVP S lives by its name with the built-in JUKI SmartStitch stitch regulator system! Never worry about your stitches being different sizes, the J-350QVP S image sensors precisely read movement keeping stitch lengths perfect..

Enjoy extra space to create those jaw-dropping quilts with the 30" x 30" table! Add optional leaves on adjustable height metal stand with wood top and leaf for the left or right side for more space. Ready to mount it on a frame? The J-350QVP converts to a 5', 7', 10', and 12' frame.

Perfect for quilters like you, who want to accomplish that high-quality and professional project, the J-350QVP S offers features that will help make your project a reality. Discover true elegance with the Miyabi J-350QVP!

Check out our educational videos in the videos tab ↑

The Juki MF7523

3-Needle Coverstitch Industrial Sewing Machine Comes With Table, Legs, Servo Motor and LED Lamp

This Juki 3 Needle Coverstitch machine is perfect for hemming of sleeves and bottoms of t-shirts and the covering stitches for sportswear and knitwear. However, it is not a specific-purpose model, but can be used for a broad range of processes independently.  This machine includes a table, pedal, lamp and a high quality adjustable servo motor.  

Recommended for:  Apparel

Returns: Due to the delivery and size of the machine returns are not accepted.  Variations: Due to the nature of industrial sewing machines table colors may vary. Disclaimer: Industrial machines are tough, but due to their weight there may be some minor scratches on the head or the table during shipping. This is normal when shipping industrial sewing machines.

Delivery: Juki MF7523 Curbside delivery by freight. The table and machine come assembled on a palette ready to sew. 

Freight Charges Apply: After your purchase we will contact you with the amount. Please select PENDING FREIGHT CHARGES upon check out.  For additional information we recommend you look at the brochure below this section and the features tab.   

The Extension Table Set features a high-quality smooth acrylic top with adjustable legs. The extended work area allows for more space when working on a large project. In addition, the see-through table top allows you to store accessories underneath. This set comes with a push pin to pin down your fabric and easily sew circles.

This table fits the MO-80CB & MO-2800

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Specifications

Application: Heavy-weight
Max. Sewing Speed: 2,500spm
Max. Stitch Length: 9mm (forward/backwards)
Lift of Presser Foot: By hand: 9mm, By knee: 16mm (max.)
Auto-lifter: optional
Alternating Vertical Movement: 2.5mm~6.5mm
Thread Take-Up: slide type
Hook: Vertical-axis double-capacity hook
Needle at Time of Delivery: 135×17 (Nm160) Nm125~Nm180
Locus of Feed: Rectangular feed
Needle Thread Tension box: Dual-tension method
Pitch Changing Method: by dial
Bobbin Thread Winder: built on the machine head
Knee-Lifter Mechanism: built on the machine head
Safety Mechanism: Provided as standard (reset with the push of a button)
Lubrication: Centralized oil wick lubrication (hook: automatic)
Lubricating Oil: JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Distance From Needle to Machine Arm: 10 inches
Bed Size: 20 inches x 7 inches
Weight of Machine Head: 93.7 lbs

Specifications

• Sewing Speed: 5500 SPM
• Feed dog: 3-row
• Max. Stitch Length: 5 mm
• Needle bar stroke: 35 mm
• Dimensions 48 x 36 x 48 inches

Select Package

DDL 8700 + Table, DDL 8700 + Table + Casters

Want the Needle Positioner?

Yes Please!, No Thanks

Specifications

Bobbin: Double capacity "M" Style
Drive System: main shaft, direct drive
GB 134R
Lift of the presser foot: By hand- 5.5mm, By knee- 13mm
Machine head made in Japan by Juki
Machine Weight: 26kg/57lbs
Main Table: 15.7"x33.7"
Max sewing speed: 2,200 SPM
Motor: AC Servo Motor
Needle Bar Stroke: 35mm
Optional Extension: 15.7"x33.7"
Working Area: 18" long x 10" high

Specifications

• Sewing Speed: 5,000spm
• Bartack Stitch
• Max. Stitch Length: 1.2~3.6mm
• Weight: 101lbs
• Dimensions:
• Throat Space