Juki DDL-8700 Invisible Zipper Foot

This presser foot is used for sewing on strands of pearls, beads or sequins.

• Braiding to a width of up to 4 mm as well as transparent or decorative threads can be sewn on. The strand can also be sewn in the middle of fabric by sewing along a folded edge with flatlock.

Series & Part Number

• MO-2800: 40138106
• MO-1000: 40138106
• MO-735: A9870-634-0A0A
• MO-114D/104D: A9870-634-0A0A
• MO-655: A9870-634-0A0A
• MO654DE/MO-644: A9870-634-0A0A
• MO-623: A9870-634-0A0A
• MO-50e: 40131949
• MO-80CB: 40131949
• MO-1200QVP: A9870-634-0A0A
• MO-2000QVP: 40138106

• Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves

• MO-2800: 40149059
• MO-1000: 40149059
• MO-735: A9511-634-0A0A
• MO-114D/104D: A9511-634-0A0A
• MO-655: A9511-634-0A0A
• MO654DE/MO-644: A9511-634-0A0A
• MO-623: A9511-634-0A0A
• MO-1200QVP: A9511-634-0A0A
• MO-2000QVP: 40149059

• The wide needle entry opening allows this presser foot to be used for a variety of fabrics and applications, from straight stitches to zigzag stitches.
• Press the black button to keep the presser for horizontal in order to smoothly begin sewing at a thick seam.

This presser foot is used to sew blind hem stitching, decorative flatlock or pin-tucks.

• This presser foot can be used with either the right or the left needle and has a guide plate that can be moved within a wide range.

• Since the seam width can be adjusted, this presser foot is also useful for decorating by sewing along a folded edge with decorative flatlock or with roll hem (pin-tuck) stitches.

Series & Part Number

• MO-2800: 40149058

• MO-1000: 40149058

• MO-735: A9521-634-0A0A

• MO-114D/104D: A9521-634-0A0A

• MO-655: A9521-634-0A0A

• MO654DE/MO-644: A9521-634-0A0A

• MO-623: A9521-634-0A0A

• MO-50e: 40131946

• MO-80CB: 40131946

• MO-1200QVP: A9521-634-0A0A

• MO-2000QVP: 40149058

• Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.