JUKI DDL-9000C Series Industrial Machine

$2,199.99$2,799.99

Direct-drive, high-speed, sewing system with automatic thread trimmer

Commitment to “seam quality” is poised to enter a new era with JUKI’s next-generation sewing system. The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience.

Now, with JUKI’s digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly suit the materials being sewn.

What’s the difference between the heavier models such as the Juki DDL-9000 FSH -Juki DDL-9000 SSH and the Juki DDL-9000 FMS- DDL-9000 SMS.  These models that have an H  are dedicated to Heavy-Weight sewing only. These models have more aggressive feed dogs, stronger needle bar stroke, and the needle sizes are larger such as a range from  #20-23. The standard needle size that comes with the machine is a 21. The models without the H have a needle range capability from 9-18. It is recommended to speak to our Industrial Machine Specialist when buying industrials.

Freight Charges Apply: After your purchase we will contact you with the final freight amount. Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

SKU: DDL-9000CSeries Category:

Description

DDL-9000C Series

Direct-drive, high-speed, sewing system with automatic thread trimmer

Commitment to “seam quality” is poised to enter a new era with JUKI’s next-generation sewing system. The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience.

Now, with JUKI’s digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly suit the materials being sewn.

Vertically- and horizontally-driven digital feed mechanism

Thanks to the world’s first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease according to the material fabric of product to be sewn, thereby improving seam quality. Thanks to this digital feed mechanism, thread trimming is carried out with the feed dog lowered in the case the shorter-thread remaining thread trimming function is enabled.

As a result, the clearance provided between the throat plate and the material is eliminated, thereby stabilizing the length of thread remaining after thread trimming.

The feed dog does not protrude the top surface of throat plate when the sewing machine stops with its needle bar up, thereby facilitating placement/removal of the material on/from the top surface of throat plate and preventing the material from being damaged by the feed dog.

Various kinds of feed locus can be selected.

Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn.

Digital functions which accentuate excellent “seam” quality

Ⅰ. Adoption of the needle-thread active tension – Needle tension is digitally controlled

Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this the DDL-900C, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Example: Needle-thread active tension demonstrates its effectiveness in the topstitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.

Ⅱ. Active presser foot pressure mechanism – The presser foot pressure is digitally controlled

The DDL-9000C has a digital control system that controls the presser foot pressure. Under the automatic mode, the multi-layered section detection function detects changes in material thickness to increase/decrease the presser foot pressure accordingly. Under the manual mode, the presser foot pressure control function is assigned to the hand switch to enable operation with the hand switch.

Ⅲ. Needle thread clamp

The device clamps the needle thread and draws it under the material at the beginning of sewing. The needle thread clamp device works to reduce the size of thread tangling in on the wrong side of the material. This expands the area around the needle entry, thereby allowing the use of various gauge components.

Management of sewing performance and the DDL-9000C sewing machine by the utilization of IoT (Internet of Things)

Management, browsing and editing of data can be carried out on the application software

Data on the DDL-9000C sewing machine adjustments made according to the product to be sewn can be transferred to a commercially-available Android tablet in contactless mode. This enables quick check for uniform settings as well as confirmation of conditions of sewing machines in a sewing line, thereby facilitating setup changes.

The operation panel is also provided as standard with a USB port. Data management and software update can be carried out with ease using a USB thumb drive. Data items of sewing can be numerically managed to ensure “stable quality” and “reduction in time required for setup changes”. Quantified sewing data can be externally taken from the sewing machine using an Android tablet or USB thumb drive.

LED Light on the DDL-9000C

The LED light illuminates the needle entry area in the just-under direction from the right and left sides of the needle bar. In comparison with the single-direction illumination, this LED light helps the operator carry out sewing more easily. Illuminance of the LED light is adjustable in five levels. It can also be used as an auxiliary lamp for working.

MODEL DDL-9000C-FMS DDL-9000C-FSH DDL-9000C-SMS DDL-9000C-SSH
Type Full Digital Type Digital Type
Application Medium-weight Heavy-weight Medium-weight Heavy-weight
Lubrication Semi-dry Minute-quantity lubrication Semi-dry Minute-quantity lubrication
Max. sewing speed 5,000sti/min*1 4,500sti/min*2 5,000sti/min*1 4,500sti/min*2
Hand switch Provided as standard (At the time of shipment: Hand switches are assigned respectively with the touch-back switch function and the one-touch changeover switch function.)
Max. stitch length 5mm
Thread trimming method Double-edge rotary system
Needle bar stroke 30.7mm 35.0mm 30.7mm 35.0mm
Feed dog height 0.8mm 1.2mm 0.8mm 1.2mm
Needle thread tension Active tension Spring type
Presser foot pressure Electronic control Spring type
Needle*3 DB×1・DB×5(#11
#9~18(Nm65~110)
DB×1・DB×5(#21)
#20~23(Nm125~160)
DB×1・DB×5(#11)
#9~18(Nm65~110)
DB×1・DB×5(#21)
#20~23(Nm125~160)
Lift of the presser foot By hand: 5.5mm, By knee: 15mm Auto: 1st stage 5.0 mm (*0.1~8.5mm), 2nd stage 8.5 mm (*8.5mm~13.5mm) * Adjustable on the operation panel
Bobbin thread winder Built in the top of machine head (provided with the bobbin thread retaining plate)
Lubricating oil JUKI New Defrix Oil No. 1 or JUKI CORPORATION GENUINE OIL 7 (equivalent to ISO VG7)
Size of bed 517×178mm(distance from needle to machine arm:303mm)
Machine head drive Compact AC servomotor (400W) that is directly connected to the main shaft (direct-drive system)
Power consumption 520VA
Net weight Machine head: 40.5kg(with AK-154)

*”sti/min” stands for “Stitches per Minute.”
*1 Stitch length of 4.00 mm or less: 5,000 sti/min; Stitch length of 4,05 – 5.00 mm: 4,000 sti/min
*2 Stitch length of 4.00 or less: 4,500sti/min; Stitch length of 4.05 – 5.00mm: 4,000sti/min
*3 Differs on a destination-by-destination basis

The walking foot, Bobbins, Bobbin Case, throat plate, and needles of the Juki TL models are NOT compatible with the Juki DDL-9000C, but the rest of the feet and accessories are.

Please see list of compatible items below:

Feet: 

Bag Makers Recommendation for Vinyls: https://jukijunkies.com/product/smooth-foot/

Needles:

https://jukijunkies.com/product/juki-dbx110x18-needles/

https://jukijunkies.com/product/juki-dbx110x14-needles/

Bobbins :

https://jukijunkies.com/product/juki-bobbin-22964001-5-pk/

In this LINK: https://jukijunkies.com/wp-content/uploads/machine-pdfs/catalogs/DDL9000C_catalog.pdf you will see a chart with SPECIFICATIONS ON the bottom right. Get to know this. This chart is on this page too. 

 

**ALL INDUSTRIALS ARE NON RETURNABLE**

 

 

Additional information

Weight 90 lbs
Select your Machine Model

DDL-9000C-FMS, DDL-9000C-FSH, DDL-9000C-SMS, DDL-9000C-SSH

Specifications

Type: Full digital type
Application: Medium-weight
Lubrication: semi-dry
Max. sewing speed: 5,000sti/min*1
Max. stitch length: 5mm
Needle bar stroke: 30.7mm
Feed dog height: 0.8mm
Needle : DB×1・DB×5(#11)#9~18(Nm65~110)
Size of bed: 517x178mm (distance from needle to machine arm: 303mm)
Power consumption: 520VA
Net weight: 90lbs. (machine head)

Want Casters?

Yes, Please, No, Thanks

Standard Features

  • Direct-drive, high-speed, sewing system with automatic thread trimmer
  • Vertically- and horizontally-driven digital feed mechanism
  • Various kinds of feed locus can be selected.
  • Adoption of the needle-thread active tension - Needle tension is digitally controlled
  • Active presser foot pressure mechanism - The presser foot pressure is digitally controlled
  • Needle thread clamp
  • Management, browsing and editing of data can be carried out on the application software
  • LED Light on the DDL-9000C

Standard Accessories

Standard Accessory List Coming Soon!

Optional Accessories

Optional Accessory List Coming Soon!

Catalogs

Video Tutorials

Quick Comparison

JUKI DDL-9000C Series Industrial Machine removeJuki MF7523 3-Needle Coverstitch Industrial Sewing Machine removeJIN NA-11/NA-11UT Direct-drive, 1-needle, Top and Bottom-feed, Lockstitch Machine with Double-capacity Hook removeJuki MO-6814S Overlock Industrial Serger removeJuki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine removeJuki LU-1560N Double Needle Unison Feed Walking Foot Industrial Sewing Machine and Servo Motor remove
NameJUKI DDL-9000C Series Industrial Machine removeJuki MF7523 3-Needle Coverstitch Industrial Sewing Machine removeJIN NA-11/NA-11UT Direct-drive, 1-needle, Top and Bottom-feed, Lockstitch Machine with Double-capacity Hook removeJuki MO-6814S Overlock Industrial Serger removeJuki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine removeJuki LU-1560N Double Needle Unison Feed Walking Foot Industrial Sewing Machine and Servo Motor remove
ImageDDL9000MAINjuki mf7523NA11UTmachinemainMO 6814S OverlockIndustrialSergerjuki1508N15604
SKUDDL-9000CSeriesJUKI-MF7523JUKI-NASERIESJUKI-MO6814s-1JUKI-1508NLU-1560N
Rating
Price$2,199.99$2,799.99$2,349.00$1,399.00$1,499.00$1,699.00$1,828.00$3,599.00$3,999.00
Stock

9 in stock

4 in stock

Availability9 in stock4 in stock
Add to cart

Select options This product has multiple variants. The options may be chosen on the product page

Add to cart

Select options This product has multiple variants. The options may be chosen on the product page

Select options This product has multiple variants. The options may be chosen on the product page

Add to cart

Add to cart

DescriptionDirect-drive, high-speed, sewing system with automatic thread trimmer Commitment to “seam quality” is poised to enter a new era with JUKI’s next-generation sewing system. The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience. Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly suit the materials being sewn. What's the difference between the heavier models such as the Juki DDL-9000 FSH -Juki DDL-9000 SSH and the Juki DDL-9000 FMS- DDL-9000 SMS.  These models that have an H  are dedicated to Heavy-Weight sewing only. These models have more aggressive feed dogs, stronger needle bar stroke, and the needle sizes are larger such as a range from  #20-23. The standard needle size that comes with the machine is a 21. The models without the H have a needle range capability from 9-18. It is recommended to speak to our Industrial Machine Specialist when buying industrials. Freight Charges Apply: After your purchase we will contact you with the final freight amount. Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

3-Needle Coverstitch Industrial Sewing Machine Comes With Table, Legs, Servo Motor and LED Lamp.

The machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear.

Freight Charges Apply:

After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck. DELIVERIES to Hawaii are suggested unassembled. Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.
NA-11 series is suited to the sewing and decorative shape-tacking of heavy-weight materials such as sofa, bags and stroller, etc.

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.
The Juki MO-6814S- High Speed Industrial 4 Thread Overlock Stitch Serger  Take it up a notch with a professional serging machine.  Increase your quality of sewing and increase your productivity with the Juki MO-6814S.  It's easy to use while sewing beautiful seams that increase durability. This advanced overlock machine is responsive from light to heavy weight materials with a lower applied tension

Freight Charges Apply:

After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck. Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.
The Juki LU-1508N series is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

Juki LU-1560N: The ideal machine for car seats, sofas, golf carts and even bags; two continuous stitches side by side a 1/4" apart. Need stitches wider? Let us know so we can modify it for you. The needle gauge can be prepped at 3/16, 1/4, 5/16, 3/8, or 1/2 an inch. 

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select "Freight Charges" upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

Content

DDL-9000C Series

Direct-drive, high-speed, sewing system with automatic thread trimmer

Commitment to “seam quality” is poised to enter a new era with JUKI’s next-generation sewing system. The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience. Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly suit the materials being sewn.

Vertically- and horizontally-driven digital feed mechanism

Thanks to the world's first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease according to the material fabric of product to be sewn, thereby improving seam quality. Thanks to this digital feed mechanism, thread trimming is carried out with the feed dog lowered in the case the shorter-thread remaining thread trimming function is enabled. As a result, the clearance provided between the throat plate and the material is eliminated, thereby stabilizing the length of thread remaining after thread trimming. The feed dog does not protrude the top surface of throat plate when the sewing machine stops with its needle bar up, thereby facilitating placement/removal of the material on/from the top surface of throat plate and preventing the material from being damaged by the feed dog.

Various kinds of feed locus can be selected.

Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn.

Digital functions which accentuate excellent "seam" quality

Ⅰ. Adoption of the needle-thread active tension - Needle tension is digitally controlled
Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this the DDL-900C, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Example: Needle-thread active tension demonstrates its effectiveness in the topstitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.
Ⅱ. Active presser foot pressure mechanism - The presser foot pressure is digitally controlled
The DDL-9000C has a digital control system that controls the presser foot pressure. Under the automatic mode, the multi-layered section detection function detects changes in material thickness to increase/decrease the presser foot pressure accordingly. Under the manual mode, the presser foot pressure control function is assigned to the hand switch to enable operation with the hand switch.
Ⅲ. Needle thread clamp
The device clamps the needle thread and draws it under the material at the beginning of sewing. The needle thread clamp device works to reduce the size of thread tangling in on the wrong side of the material. This expands the area around the needle entry, thereby allowing the use of various gauge components.

Management of sewing performance and the DDL-9000C sewing machine by the utilization of IoT (Internet of Things)

Management, browsing and editing of data can be carried out on the application software

Data on the DDL-9000C sewing machine adjustments made according to the product to be sewn can be transferred to a commercially-available Android tablet in contactless mode. This enables quick check for uniform settings as well as confirmation of conditions of sewing machines in a sewing line, thereby facilitating setup changes. The operation panel is also provided as standard with a USB port. Data management and software update can be carried out with ease using a USB thumb drive. Data items of sewing can be numerically managed to ensure "stable quality" and "reduction in time required for setup changes". Quantified sewing data can be externally taken from the sewing machine using an Android tablet or USB thumb drive.

LED Light on the DDL-9000C

The LED light illuminates the needle entry area in the just-under direction from the right and left sides of the needle bar. In comparison with the single-direction illumination, this LED light helps the operator carry out sewing more easily. Illuminance of the LED light is adjustable in five levels. It can also be used as an auxiliary lamp for working.
MODEL DDL-9000C-FMS DDL-9000C-FSH DDL-9000C-SMS DDL-9000C-SSH
Type Full Digital Type Digital Type
Application Medium-weight Heavy-weight Medium-weight Heavy-weight
Lubrication Semi-dry Minute-quantity lubrication Semi-dry Minute-quantity lubrication
Max. sewing speed 5,000sti/min*1 4,500sti/min*2 5,000sti/min*1 4,500sti/min*2
Hand switch Provided as standard (At the time of shipment: Hand switches are assigned respectively with the touch-back switch function and the one-touch changeover switch function.)
Max. stitch length 5mm
Thread trimming method Double-edge rotary system
Needle bar stroke 30.7mm 35.0mm 30.7mm 35.0mm
Feed dog height 0.8mm 1.2mm 0.8mm 1.2mm
Needle thread tension Active tension Spring type
Presser foot pressure Electronic control Spring type
Needle*3 DB×1・DB×5(#11 #9~18(Nm65~110) DB×1・DB×5(#21) #20~23(Nm125~160) DB×1・DB×5(#11) #9~18(Nm65~110) DB×1・DB×5(#21) #20~23(Nm125~160)
Lift of the presser foot By hand: 5.5mm, By knee: 15mm Auto: 1st stage 5.0 mm (*0.1~8.5mm), 2nd stage 8.5 mm (*8.5mm~13.5mm) * Adjustable on the operation panel
Bobbin thread winder Built in the top of machine head (provided with the bobbin thread retaining plate)
Lubricating oil JUKI New Defrix Oil No. 1 or JUKI CORPORATION GENUINE OIL 7 (equivalent to ISO VG7)
Size of bed 517×178mm(distance from needle to machine arm:303mm)
Machine head drive Compact AC servomotor (400W) that is directly connected to the main shaft (direct-drive system)
Power consumption 520VA
Net weight Machine head: 40.5kg(with AK-154)
*"sti/min" stands for "Stitches per Minute." *1 Stitch length of 4.00 mm or less: 5,000 sti/min; Stitch length of 4,05 - 5.00 mm: 4,000 sti/min *2 Stitch length of 4.00 or less: 4,500sti/min; Stitch length of 4.05 - 5.00mm: 4,000sti/min *3 Differs on a destination-by-destination basis The walking foot, Bobbins, Bobbin Case, throat plate, and needles of the Juki TL models are NOT compatible with the Juki DDL-9000C, but the rest of the feet and accessories are. Please see list of compatible items below: Feet:  Bag Makers Recommendation for Vinyls: https://jukijunkies.com/product/smooth-foot/ Needles: https://jukijunkies.com/product/juki-dbx110x18-needles/ https://jukijunkies.com/product/juki-dbx110x14-needles/ Bobbins : https://jukijunkies.com/product/juki-bobbin-22964001-5-pk/ In this LINK: https://jukijunkies.com/wp-content/uploads/machine-pdfs/catalogs/DDL9000C_catalog.pdf you will see a chart with SPECIFICATIONS ON the bottom right. Get to know this. This chart is on this page too.    **ALL INDUSTRIALS ARE NON RETURNABLE**    

The Juki MF7523

3-Needle Coverstitch Industrial Sewing Machine Comes With Table, Legs, Servo Motor and LED Lamp

This Juki 3 Needle Coverstitch machine is perfect for hemming of sleeves and bottoms of t-shirts and the covering stitches for sportswear and knitwear. However, it is not a specific-purpose model, but can be used for a broad range of processes independently.  This machine includes a table, pedal, lamp and a high quality adjustable servo motor.  

Recommended for:  Apparel

Returns: Due to the delivery and size of the machine returns are not accepted.  Variations: Due to the nature of industrial sewing machines table colors may vary. Disclaimer: Industrial machines are tough, but due to their weight there may be some minor scratches on the head or the table during shipping. This is normal when shipping industrial sewing machines.

Delivery: Juki MF7523 Curbside delivery by freight. The table and machine come assembled on a palette ready to sew. 

Freight Charges Apply: After your purchase we will contact you with the amount. Please select PENDING FREIGHT CHARGES upon check out.  For additional information we recommend you look at the brochure below this section and the features tab.   

JUKI NA-11/NA-11UT Direct-drive, 1-needle, Top and Bottom-feed, Lockstitch Machine with Double-capacity Hook

Product Features:

  • Needle thread clamping device

    The needle thread device is standard equipment. As a result, the needle thread at the start of sewing does not come out on the cloth, so the start of sewing beautiful finished seams. Operators use scissors less often and can prevent damage to the material caused by thread picking.
  • Increased productivity by improved operability

    The machine achieves a longer distance from machine arm to needle by adopting a high long arm. This means the machine dramatically increases workability when sewing large products such as sofas and car seats.
  • The direct drive system and the operation panel

    The sewing machine has been integrated with the control box and the operation panel for ease of use. The direct-drive motor system has been adopted by all of the sewing machine. This sewing machine is provided with a high-torque direct-drive motor that supports heavy-weight materials. Thanks to this motor, the sewing machine achieves excellent responsiveness and maintains strong material-penetrating power even when sewing multi-layered parts of material.
  • LED Light

    The LED light is located on the underside of the arm jaw. It reduces operator fatigue and improves work efficiency. It is provided as standard for all models of the NA-11 Series.
  • Feeding mechanism

    The machine’s powerful top & bottom feed demonstrates its performance when sewing leather and heavy fabric. The lift of the presser foot is as high as 16 mm, which responds to the sewing of bucky materials.
  • Horizontal-axis full-rotary double-capacity hook

    The adoption of the horizontal-axis double-capacity hook helps reduce the frequency of bobbin thread replacement, thereby promising sewing work with efficiency. This hook is also helpful not only when sewing with thick thread but also when sewing a long seam length.
  • Mechanism of automatic thread trimmer (NA-11UT)

    The automatic thread trimmer achieves consistent thread trimming regardless of thickness of the thread, i.e., from thin to thick thread. The machine has adopted the rotary thread trimming mechanism which matches, in particular, design stitch with thick thread for furniture and bags. The automatic thread trimmer improves workability and increases productivity. When compared with the sewing machine without a thread trimmer, the NA-11UT substantially decreases the consumption of thread. The knife pressure can be adjusted with the adjusting screw.
https://www.youtube.com/watch?v=f_QyJJcDTHQ&t=7s

Juki MO-6814S - 4 Thread High-speed Overlock Industrial Serger with Table, Stand and Servo Motor

This advanced overlock machine is easier to use and promises superior cost effectiveness. Table dimensions are: 21 x 48"

The machine achieves beautifully finished seams of improved quality even when run at a high speed.

The machine is widely applicable to the sewing of light (like silk, chiffon, lace)- to heavier materials (2-3 layers of 2 ply denim). Since the machine is provided with a needle thread take-up mechanism and a looper thread take-up lever, it ensures high-quality, well-tensed and soft seams with a beautiful texture which flexibly correspond to the elasticity of the materials even when run at speeds as high as 7,000 sti/min. In addition, the machine has a wider and brighter needle entry and provides improved responsiveness to the materials, thereby helping the operator use the machine more easily. The optimally-balanced design of the machine reduces both operating noise and vibration, contributing to more comfortable sewing work.   Freight Charges Apply: After your purchase we will contact you with the final amount. Please select Freight Charges Starting at: $299.00  upon check out to select the minimum charge.   

1-Needle, Unison Feed, Lockstitch Machine With Vertical-axis Large Hook

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar stroke of 38mm and long 190R needle, the compound feed machine supports the sewing of extra heavy materials. The walking foot machine comes with an extra-large steel handwheel with a diameter as large as φ175.

A new feed mechanism with a rectangular feeding motion prevents stitch gathering

The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering. The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.

The alternating vertical movement mechanism prevents irregular stitches

The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes. Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches. The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of the material.

Consistent seam quality

With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors. With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.

Higher lift of the presser foot

The high, 16mm foot lift enables easy material handling.

The machine comes with a dual-tension mechanism

The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.

The highly efficient vertical-axis double-capacity hook is equipped as standard

With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.

Improved operability

The stitch length can be easily selected by the stitch dial. The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160). A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.) The machine is a full-open-type top design that makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head. The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

Juki LU-1560N: The ideal machine for car seats, sofas, golf carts and even bags; two continuous stitches side by side a 1/4"

The Juki LU-1560N unique feed mechanism promises excellent efficiency of feed. In addition to the standard models of 2-needle machines, other models intended for special purposes are available, one having a thread trimmer. The machine is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity.

The higher lift of the presser foot lifts up to 16mm by knee and 9mm by hand making ideal for heavy layers of material. The machine delivers increased productivity at a sewing speed as high as 2,500 Stitches per minute  with a throat space of 517mm×178mm.

This machine has the option of a needle positioner and/or casters for an additional fee. Please select option when adding product to cart.

Freight Charges Apply: After your purchase we will contact you with the final amount. Please select Freight Charges Starting at: $299.00  upon check out to select the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck. DELIVERIES to Hawaii are suggested unassembled.

Improved Provability for the Juki LU-1650N

  • The stitch length can be easily selected by the stitch dial.
  • The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160).
  • A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.)
  • The machine is full-open-type top design makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head.
  • The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

The area around the needle entry is designed to be easily observed (LU-1560N-7, LU-1561N-7)

Since the needle thread tension-release solenoid is fitted on the rear face of the machine head, the area around the needle entry and one-touch type reverse feed button is easily viewable. This substantially contributes to improved operability.

The walking foot and presser foot's alternating vertical movement can be set and changed with ease (LU-1560N-7, LU-1561N-7)

  • The vertical strokes of the presser foot and walking foot (their alternating vertical movement) can be easily changed using a large dial mounted on the top surface of the machine head.
  • In addition the sewing speed is automatically adjusted with the set value. With this feature, ideal sewing conditions are maintained at all times.
  • The machine is equipped with an instantaneous changeover device for alternating the vertical movement amount of the walking foot and presser foot, which demonstrates its capability for processes involving sewing products with a lot of multi-layered portions.

A helpful automatic reverse feed function is provided as standard (LU-1560N-7, LU-1561N-7)

  • With just a light press on the one-touch type reverse feed button, reverse feed stitching is actuated. Furthermore if a suspended ruler is attached on the machine or a 3-dimensional sewing product is sewn, the button can be shifted upward to prevent interruption.
  • The auto-lifter (pedal switch type) helps to increase efficiency by reducing operator fatigue.

Thread trimming without fail (LU-1560N-7, LU-1561N-7)

The machine leaves a shorter needle thread after thread trimming, improving thread consumption efficiency. With a rigid knife and improved cam shape, the thread trimmer cuts thread as thick as #5 without fail.
  • Bottom-feed micro-adjustment mechanism is provided as standard (LU-1510N-7, LU-1511N-7)

    The 1-needle type machine is equipped with a bottom-feed micro-adjustment mechanism with the needle feed amount fixed. This helps prevent irregular stitches which are free from pitch errors.
 

Weight90 lbsN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 90 lbs
Select your Machine Model

DDL-9000C-FMS, DDL-9000C-FSH, DDL-9000C-SMS, DDL-9000C-SSH

Specifications

Type: Full digital type
Application: Medium-weight
Lubrication: semi-dry
Max. sewing speed: 5,000sti/min*1
Max. stitch length: 5mm
Needle bar stroke: 30.7mm
Feed dog height: 0.8mm
Needle : DB×1・DB×5(#11)#9~18(Nm65~110)
Size of bed: 517x178mm (distance from needle to machine arm: 303mm)
Power consumption: 520VA
Net weight: 90lbs. (machine head)

Want Casters?

Yes, Please, No, Thanks

Specifications

• Sewing Speed: 5,000spm
• Bartack Stitch
• Max. Stitch Length: 1.2~3.6mm
• Weight: 101lbs
• Dimensions:
• Throat Space

Weight N/A
Specifications

, , , , , , , , , , , , , ,

Specifications

• Sewing Speed: Max. 7,000spm
• Needles: DC x 27
• Max. Stitch Length: 0.6 ~ 3.8 (4.5) mm
• Dimensions:
• Machine Weight: 59.5lbs (27kg)

Select Package

MO-6814S + Table, MO-6814S + Table + Casters