JUDY SEWING CABINET

$899.00

The Judy Sewing Cabinet has a three-position airlift that holds most sewing machines comfortably leaving room for sewers to sit while completing projects.

SKU: JUDY-CABINET Categories: ,

Description

This sewing cabinet has a three-position airlift that holds most sewing machines comfortably and moves effortlessly up and down. Room in front of the lift allows for sewers to sit in the correct sewing position.

 Cabinet Open:

    • 50 ¾” W x 17 ¼” D x 29 ½” H
  • Cabinet Closed:
    • 25 ½” W x 17 ¼” D x 30 1/8” H
  • Lift Opening, A10:
    • 20 15/16” W x 11 3/8” D x Adjustable Height

*Please measure your machine and include knobs, plugs, etc. that extend beyond the body of machine.

  • Construction: Vinyl laminate/MDF/Composite
  • Dual-Hydraulic Lift Weight Limit: 55 #s
  • Custom Machine Insert Available for machines less than 17-1/2″ wide by 12-1/2″ deep

SEWING MACHINES THAT DO NOT FIT JUDY

We are aware of the following sewing machines that are too large to fit into the Judy.

Incompatible Machines:

  • Baby Lock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Elna – 920 eXpressive
  • Janome – Horizon Memory Craft 15,000 & Continental M7
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flat bed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flat bed position.

The above are the known machines that do not fit properly. Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

Standard Features

  • Sew in any position, flatbed or free-arm, with the ergonomic adjustable height hydraulic airlift mechanism
  • Store machine effortlessly
  • The Judy Cabinet is ideal for Sewing Machines up to 55 ibs, Width: 21” (left to right), Depth: 11 ⅜” (front to back), Height: 13″
  • Locking swivel casters allow for steady sewing and easy movement in your room
  • Optional machine specific custom insert available for any sewing machine model
  • Easy assembly
  • Additional information can be found on our Judy Cabinet informational sheet
  • Arrow Sewing Furniture Ten-Year Limited Warranty

Standard Accessories

Standard Accessory List Coming Soon!

Optional Accessories

Optional Accessory List Coming Soon!

Catalogs

Catalog Coming Soon!
Manual Coming Soon!

Video Tutorials

Quick Comparison

SettingsJUDY SEWING CABINET removeKANGAROO JOEY CABINET WHITE removeBANDICOOT II CABINET TEAK removeSew Steady Custom Insert for Sewing Cabinet removeDIXIE CUTTING TABLE removeGIDGET I TABLE remove
ImageJudyCabinet white displaykangaroojoeycabinetwhitebandicootIIcabinetteakdixiecuttingtableGidget 1 table white open
SKUJUDY-CABINETJOEY-WHITEBANDII-TEAKCustom InsertDIXIE-TABLEGidgetONE
Rating
Price$899.00$2,499.00$1,399.00$129.99$799.00$229.00
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe Judy Sewing Cabinet has a three-position airlift that holds most sewing machines comfortably leaving room for sewers to sit while completing projects.Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

Sew in any position with our Bandicoot as our EZ-Lift gas strut mechanism lets you sew flatbed or freearm at any height with a simple push down the lift also provides easy, effortless storage with a simple push and holds a 45-pound machine.IMPORTANT MESSAGE:
  • please specify UPON CHECKOUT which machine you have in the note section.
  • NOTE: Inserts ship separately from cabinets and will arrive later.
A custom insert is a plexi-glass (high grade acrylic) piece that is designed to fit your specific make and model of sewing of sewing machine and fills gaps around your sewing area, allowing you to work more efficiently .  The insert is used only when you wish to use the FLATBED position of the cabinet. If your machine has an accessory storage drawer you will remove it to reveal your free arm. The inserts fits around the free arm and the entire machine making it all one platform.

Inserts are not returnable once ordered. *Inserts are made to order and are specific to your machine. They will arrive 4-8 weeks after you receive your cabinet.

This incredible sturdy table is there for you when you need it and can be easily put away when not in use, this table provides you with 49' of workspace and can be slimed down to 14" when folded together.The Arrow Gidget I is an affordable table, that allows the sewer to have a greater workspace while sewing and or quilting. This sturdy table allows a flat bed sewing experience vs. a raised table that normally would come with your machine. This means the sewer or quilter will be more comfortable while sewing and having a great workspace. Compared to Arrow Gidget II Table   this table is much smaller  measuring at  (17 ½” W vs 7 ⅜” D)
ContentThis sewing cabinet has a three-position airlift that holds most sewing machines comfortably and moves effortlessly up and down. Room in front of the lift allows for sewers to sit in the correct sewing position.  Cabinet Open:
    • 50 ¾” W x 17 ¼” D x 29 ½” H
  • Cabinet Closed:
    • 25 ½” W x 17 ¼” D x 30 1/8” H
  • Lift Opening, A10:
    • 20 15/16” W x 11 3/8” D x Adjustable Height
*Please measure your machine and include knobs, plugs, etc. that extend beyond the body of machine.
  • Construction: Vinyl laminate/MDF/Composite
  • Dual-Hydraulic Lift Weight Limit: 55 #s
  • Custom Machine Insert Available for machines less than 17-1/2″ wide by 12-1/2″ deep

SEWING MACHINES THAT DO NOT FIT JUDY

We are aware of the following sewing machines that are too large to fit into the Judy. Incompatible Machines:
  • Baby Lock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Elna – 920 eXpressive
  • Janome – Horizon Memory Craft 15,000 & Continental M7
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flat bed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flat bed position.
The above are the known machines that do not fit properly. Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

  • Kangaroo II Cabinet Dimensions
    • Open (quilt leaf out)
      • 55 ⅝” W x 40 ½” D x 29 ½ H
    • Closed
      • 55 ⅝” W x 21” D x 29 ½ H
  • Joey II Dimensions
    • 25 ¾” W x 16 ½” D x 24″ H
    • Top two drawer dimensions:
      • 22 ½ ” W x 13″ D x 2 ½” H
    • Bottom drawer dimensions:
      • 22 ½ ” W x 13″ D x 8″ H
  • Sewing Machines that Fit:
    • Supports sewing machines up to 55 pounds
      • Width: 23-3/4” (left to right)
      • Depth: 12-1/2” (front to back)
      • Height: 14-1/2”
    • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
  • Both products made from melamine laminate, MDF, and composite
  • Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

We are aware of the following sewing machines that are too large to fit into the Kangaroo II sewing cabinet (K8805 Teak and K8811 Ash White):
  • BabyLock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Janome – Horizon Memory Craft 15,000
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
  • Elna –  eXpressive 920
    • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
  • The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.
Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

SHIPPING INFORMATION

  • The cabinet is shipped ready to assemble in five boxes
  • Kangaroo II weighs a total of 156 pounds
  • Joey II weighs a total of 60 pounds
  • Arrow determines shipping carrier, FedEx or UPS
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

Assembly instructions are included with the cabinet. You may also download the Kangaroo II and Joey II manuals and save them to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet
  • Optional:
    • WD-40
    • Adjustable wrench
Sew in any position with our Bandicoot as our EZ-Lift gas strut mechanism lets you sew flatbed or freearm at any height with a simple push down the lift also provides easy, effortless storage with a simple push and holds a 45-pound machine.

CABINET SPECIFICATIONS

  • Cabinet Dimensions Open:
    • 60 ¾” W x 17 ⅜” D x 29 ⅜” H
  • Cabinet Dimensions Closed:
    • 30 ½” W x 17 ⅜” D x 29 ⅞” H
  • Lift Opening:
    • 20 15/16” W x 11 ⅜” D x 14” H
  • Door Cubby (x2):
    • 8 ⅝” W x 6 ¼” D x 4 ½” H
  • Shelf (x2):
    • 12 ¼” W x  4 ⅛” D x 9 ¾” H

SEWING MACHINES THAT DO NOT FIT BANDICOOT

We are aware of the following sewing machines that are too large to fit into the Bandicoot Cabinet:
  • Baby Lock
    • Destiny
    • Solaris
    • Ellissimo (BLSO) & Ellissimo Gold (BLSOG) & Ellissimo Gold 2
    • Ellegante, BLG, BLG2. BLG2-NZ, Model 2600
    • Ellageo, BLL, Ellageo Plus, BLL2
    • Esante BLN, BLSR,
    • BL Jane 500
    • Sergers: BL400 & BL450
    • Sashiko & Sashiko 2 BLQk & BLQK2
    • Crescendo BLCR
    • Unity BLTY
    • Journey BLJY
    • Aria BLAR
  • Bernina
    • Series 8- 830, 820, 880 (All)
    • Series 7- 710, 750 QE, 780 (All)
    • Deco 330 & 340
  • Brother
    • Dream VX8500D
    • Luminaire Innov-is XP1
    • Quattro, NV6000D & NV6500D, Quattro 2 6700, Quattro 3 Trilogy LE Innovis 6750D
    • Duetta, Innovis NV4000D & NV4500D, Duetta 2 4750D
    • Innovis NV 1500D, NV2500D, NV2000, NV2800, NV 2800D
    • Innovis QC1000
    • Isodore Innovis 5000
    • DreamMaker XE VE2200, DreamWeaver XE VM6200D
  • Elna 920 eXpressive
    • eXpressive 920 (Same as Janome Horizon Memory Craft 15,000)
    • 900, 860, 830, 820
    • Excellence 740, 760, 730
  • Pfaff
    • Creative Sensation
    • Creative Vision
  • Janome
    • Horizon (All) 15,000, 7700, 12,000, 8900, 8200, 9400
  • Singer
    • Futura Quartet, Quartet 4, XL-400, SEQS-6000, Quintet
    • All Quantum Futura , CE-100, CE-200, CE-250, CE-300, CE-350, SES-1000, SES-2000
    • SEQS-6000, SEQS-6700
  • Viking
    • Designer Epic
Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

SHIPPING INFORMATION

  • The cabinet ships in 3 boxes by FedEx or UPS
  • Boxes weigh approximately 85 lbs
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If ordered, a Custom Machine Insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Bandicoot II Assembly Instructions and save it to your computer. For assembly, you will need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer or mallet
  • Optional:
    • WD-40

ASSEMBLY VIDEOS:

ADJUSTING THE AIRLIFT:

ALTERNATIVE AIRLIFT:

*Please provide the make and model of your sewing machine upon check out on the note section. Your custom insert will be specific to your machine and the cabinet you have purchased. If you are unsure of the make and model, please double check.

  • please note UPON CHECKOUT which machine you have.
  • (NOTE: Inserts ship separately from cabinets and will arrive later.)
A custom insert is a plexi-glass piece that is designed to fit your specific make and model of sewing of sewing machine and fills gaps around your sewing area, allowing you to work more efficiently and comfortably.  The inserts are made of a high grade of acrylic. The insert is used only when you wish to use the FLATBED position of the cabinet. If your machine has an accessory storage drawer you will remove it to reveal your free arm. The inserts fits around the free arm and the entire machine making it all one platform.

********Please provide the make and model of your sewing machine upon check out on the note section. *********

Your custom insert will be specific to your machine and the cabinet you have purchased. If you are unsure of the make and model, please double check. Inserts are not returnable once ordered. *Inserts are made to order and are specific to your machine,  they will arrive 4-8 weeks after you receive your cabinet.

 This incredible sturdy table is there for you when you need it and can be easily put away when not in use, this table provides you with 49' of workspace and can be slimmed down to 14" when folded together.

TABLE SPECIFICATIONS

  • Table Open:
    • 49” W x 37” D
    • Height Adjustable
  • Table Closed:
    • 14” W x 37” D
    • Height Adjustable
  • Shelf Space (x2):
    • 11 ½ ” W x 34 ½ ” D x 12 ½ ” H
  • Cutting Mat C
    • 48” W x 36” D

ASSEMBLY MANUAL

Assembly instructions are included with the cabinet. You may also download the Dixie Cutting Table Assembly Manual and save it to your computer.
  • The Dixie Cutting ships ready to assemble in two boxes.
  • Dixie weighs a total of 92 pounds
  • Arrow determines shipping carrier, FedEx or UPS

A great sewing table that is strong, supportive and can be easily tucked away. Luckily, the Gidget I Table is all of these things and more! With powerful steel locking legs, ergonomic height positioning and a collapsible frame for easy storage, the Gidget I is there when you need it and out of sight when you don’t.

Use the Gidget I as your everyday table, or as your traveling table to be creative anywhere at any time!

What we love about the Gidget table is that it allows you to have a larger work space for sewing and quilting.

gidget table 2 with dx7

TABLE SPECIFICATIONS

  • Dimensions Open:
    • 40″ W x 19 ¾” D x 28 ¼” H
  • Dimensions with Legs Folded:
    • 40″ W x 19 ¾” D x 4 ½” H
  •  The Gidget I Table will accommodate sewing machines no larger than:
    • 17 ½” W (left to right)
    • 7 ⅜” D (front to back)
    • If your machine is equal to or less than those measurements, it will fit the opening.
  • Construction: Melamine/MDF with Steel Legs

SHIPPING INFORMATION

  • The cabinet is fully assembled and shipping one box
  • Gidget I weighs a total of 35 pounds
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • Please email our store with your machine type so that we may order your insert. There is an additional charge.

COMPARE GIDGET I VS. GIDGET II

  • Gidget I has a smaller opening size (17 ½” W vs 7 ⅜” D) compared to the large opening on Gidget II (23 ½” W x 12” D)
  • Gidget II Table features two wheels for easier portability when folded flat. Gidget I does not have wheels but can easily be transported with collapsible legs.
  • Gidget I is made of particle board with steel locking legs. Gidget II is made with denser MDF (medium density fiberboard) and steel locking legs.
  • Gidget II will require a  custom insert for her opening. Gidget I has a smaller opening, and may not need an insert if your machine is deep enough to fill most gaps.

ASSEMBLY INSTRUCTIONS

The Gidget I arrives fully assembled, however, we have a few helpful documents to make your set-up easier. You may also download documents and save them to your computer. Adjusting the height of the platform with an insert 601/611 Manual – Adjusting the Flatbed Position 
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information