This presser foot is used for sewing on piping while overlocking the edge of the fabric.
This standard presser foot is used for sewing straight stitches and zigzag stitches. It can be used to sew lightweight to heavyweight materials.
This Thin Fabric presser foot is designed specifically for sewing lightweight materials easily. It reduces puckering and prevents skipped stitches as well as faulty stitching. Pair the thin throat plate for best results.
Compatible with all Juki TL models. Such as:
This presser foot is used for sewing together two pieces of fabric while creating gathers.
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Content
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.
Series & Part Number
MO-2800: 40138103
MO-1000: 40138103
MO-735: A9865-655-0A0A
MO-114D/104D: A9865-655-0A0A
MO-655: A9865-655-0A0A
MO654DE/MO-644: A9865-655-0A0A
MO-623: A9865-655-0A0A
MO-50e: 40131950
MO-80CB: 40131950
MO-1200QVP: A9865-655-0A0A
MO-2000QVP: 40138103
This standard presser foot is used for sewing straight stitches and zigzag stitches. It can be used to sew lightweight to heavyweight materials.
The wide needle entry opening allows this presser foot to be used for a variety of fabrics and applications, from straight stitches to zigzag stitches.
Press the black button to keep the presser for horizontal in order to smoothly begin sewing at a thick seam.
This listing is for computerized machines only.
This Thin Fabric presser foot is designed specifically for sewing lightweight materials easily.
Since the needle drops into a round opening, this presser foot reduces puckering when sewing lightweight materials, preventing skipped stitches as well as faulty stitching.
This presser foot is used for sewing together two pieces of fabric while creating gathers.
Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 to 2.0
Gathers can also be created in a single piece of fabric.
Series & Part Number
MO-2800: 40138121
MO-1000: 40138121
MO-735: A9860-655-0A0C
MO-114D/104D: A9860-655-0A0C
MO-655: A9860-655-0A0C
MO-654DE/MO-644: A9860-655-0A0C
MO-623: A9860-655-0A0C
MO-50e: 40131948
MO-80CB: 40131948
MO-1200QVP: A9860-655-0A0C
MO-2000QVP: 40138121
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves