GINGER CABINET

$1,299.00

Allowing you to cut, sew and iron all in one spot, the Ginger cabinet offers five drawers and four cubbies to store your thread and accessories. On the far left, you will cut your fabric, in the middle you will sew your project and on the right you will iron with the built in ironing board.

Description

Allowing you to cut, sew and iron all in one spot, the Ginger cabinet offers five drawers and four cubbies to store your thread and accessories. On the far left, you will cut your fabric, in the middle you will sew your project and on the right you will iron with the built in ironing board.

CABINET SPECIFICATIONS

  • Cabinet Dimensions:
    • Open: 61 ¼” W x 31 ½” D x 29 ½” H
    • Closed: 48 ½” W x 31 ½” D x 29 ½” H
  • Drawer (x3) Dimensions:
    • 4 ⅜” W x 12” D x 3 ½” H
  • Shelf (x4) Dimensions:
    • 11 ¾” W x 7 ½” D x 6 1⁄4 ” H
  • Cutting Mat Dimensions:
    • 23” W x 17” D
  • Ginger Cabinet is ideal for Sewing Machines:
    • Up to 45 pounds
    • Maximum Machine Dimensions:
      • Width: 23 ¾” (left to right)
      • Depth: 12 ½” (front to back)
      • Sewing machine opening is beveled
    • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
  • The Ginger features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT GINGER SEWING CABINET

We are aware of the following sewing machines that are too large to fit into the Ginger Cabinet:

  • BabyLock – Destiny and Solaris
  • Brother – Dream VX8500D and Luminaire Innov-is XP1
  • Janome – Horizon Memory Craft 15,000
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
  • Elna –  eXpressive 920
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

  • Storage includes:
    • Five drawers located on the front left
      • Top two hold thread pegs which hold 24 thread spools each (48 total)
      • Bottom three are single compartments for other storage
    • Four shelves located on the left side

SHIPPING INFORMATION

  • The cabinet is shipped LTL, ready to assemble in three separate boxes
  • Ginger weighs a total of 165 pounds
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Ginger Cabinet manual and save it to your computer.

For assembly, you’ll need:

  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer/mallet
  • Optional:
    • WD-40
    • Adjustable wrench

Standard Features

  • Adjustable two-position manual lift
  • Moves your machine into two positions: free arm or flatbed
  • Manual platform design with a 45-pound sewing machine capacity
  • Made to accommodate larger sewing machines
  • Ironing pad can be moved out of the way by simply collapsing the leaf
  • Sewing machine opening is beveled

Standard Accessories

Standard Accessory List Coming Soon!

Optional Accessories

Optional Accessory List Coming Soon!

Catalogs

Catalog Coming Soon!
Manual Coming Soon!

Video Tutorials

Quick Comparison

SettingsGINGER CABINET removeSew Steady Custom Insert for Sewing Cabinet removeDIVA CABINET removeCORNER CABINET removeJUDY SEWING CABINET removeMOD 5 DRAWER STORAGE CABINET remove
NameGINGER CABINET removeSew Steady Custom Insert for Sewing Cabinet removeDIVA CABINET removeCORNER CABINET removeJUDY SEWING CABINET removeMOD 5 DRAWER STORAGE CABINET remove
ImagegingersewingcabinetDivaCabinet Open WhitecornersewingcabinetJudyCabinet white displayMod5 Drawer cabinet white open
SKUGINGER-CABINETCustom InsertDIVA-CABINETCORNER-WHITEJUDY-CABINETMOD5-CABINET
Rating
Price$1,299.00$129.99$3,999.00$1,199.00$899.00$1,499.00
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionAllowing you to cut, sew and iron all in one spot, the Ginger cabinet offers five drawers and four cubbies to store your thread and accessories. On the far left, you will cut your fabric, in the middle you will sew your project and on the right you will iron with the built in ironing board.IMPORTANT MESSAGE:
  • please specify UPON CHECKOUT which machine you have in the note section.
  • NOTE: Inserts ship separately from cabinets and will arrive later.
A custom insert is a plexi-glass (high grade acrylic) piece that is designed to fit your specific make and model of sewing of sewing machine and fills gaps around your sewing area, allowing you to work more efficiently .  The insert is used only when you wish to use the FLATBED position of the cabinet. If your machine has an accessory storage drawer you will remove it to reveal your free arm. The inserts fits around the free arm and the entire machine making it all one platform.

Inserts are not returnable once ordered. *Inserts are made to order and are specific to your machine. They will arrive 4-8 weeks after you receive your cabinet.

The Diva Cabinets fold down quilt leaf makes this table ideal for large projects, and its caddy features a removable ironing pad, a cubby to fit an embroidery unit, and two additional drawers for  storage.

Minimize your space with this unique corner cabinet with a sewing machine lift!The Judy Sewing Cabinet has a three-position airlift that holds most sewing machines comfortably leaving room for sewers to sit while completing projects.This cabinet helps you stay incredibly organized by separating your fabrics and notions. The four rolling casters that lock in place also allow for easy movement so you have storage wherever you need it. Use next to our other popular MOD Squad Product or with any of our cabinets for additional storage space for your sewing and craft needs.
Content

Allowing you to cut, sew and iron all in one spot, the Ginger cabinet offers five drawers and four cubbies to store your thread and accessories. On the far left, you will cut your fabric, in the middle you will sew your project and on the right you will iron with the built in ironing board.

CABINET SPECIFICATIONS

  • Cabinet Dimensions:
    • Open: 61 ¼” W x 31 ½” D x 29 ½” H
    • Closed: 48 ½” W x 31 ½” D x 29 ½” H
  • Drawer (x3) Dimensions:
    • 4 ⅜” W x 12” D x 3 ½” H
  • Shelf (x4) Dimensions:
    • 11 ¾” W x 7 ½” D x 6 1⁄4 ” H
  • Cutting Mat Dimensions:
    • 23” W x 17” D
  • Ginger Cabinet is ideal for Sewing Machines:
    • Up to 45 pounds
    • Maximum Machine Dimensions:
      • Width: 23 ¾” (left to right)
      • Depth: 12 ½” (front to back)
      • Sewing machine opening is beveled
    • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
  • The Ginger features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT GINGER SEWING CABINET

We are aware of the following sewing machines that are too large to fit into the Ginger Cabinet:
  • BabyLock – Destiny and Solaris
  • Brother – Dream VX8500D and Luminaire Innov-is XP1
  • Janome – Horizon Memory Craft 15,000
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
  • Elna –  eXpressive 920
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.
  • Storage includes:
    • Five drawers located on the front left
      • Top two hold thread pegs which hold 24 thread spools each (48 total)
      • Bottom three are single compartments for other storage
    • Four shelves located on the left side

SHIPPING INFORMATION

  • The cabinet is shipped LTL, ready to assemble in three separate boxes
  • Ginger weighs a total of 165 pounds
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

Assembly instructions are included with the cabinet. You may also download the Ginger Cabinet manual and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer/mallet
  • Optional:
    • WD-40
    • Adjustable wrench

*Please provide the make and model of your sewing machine upon check out on the note section. Your custom insert will be specific to your machine and the cabinet you have purchased. If you are unsure of the make and model, please double check.

  • please note UPON CHECKOUT which machine you have.
  • (NOTE: Inserts ship separately from cabinets and will arrive later.)
A custom insert is a plexi-glass piece that is designed to fit your specific make and model of sewing of sewing machine and fills gaps around your sewing area, allowing you to work more efficiently and comfortably.  The inserts are made of a high grade of acrylic. The insert is used only when you wish to use the FLATBED position of the cabinet. If your machine has an accessory storage drawer you will remove it to reveal your free arm. The inserts fits around the free arm and the entire machine making it all one platform.

********Please provide the make and model of your sewing machine upon check out on the note section. *********

Your custom insert will be specific to your machine and the cabinet you have purchased. If you are unsure of the make and model, please double check. Inserts are not returnable once ordered. *Inserts are made to order and are specific to your machine,  they will arrive 4-8 weeks after you receive your cabinet.

The Diva Cabinets fold down quilt leaf makes this table ideal for large projects, and its caddy features a removable ironing pad, a cubby to fit an embroidery unit, and two additional drawers for  storage.

CABINET SPECIFICATIONS

  • Cabinet Dimensions Open:
    • 69 ½” W x 43 ⅜ ” D  x 30” H
  • Cabinet Dimensions Closed:
    • 69 ½” W x 30” D x 30” H
  • Quilt Leaf:
    • 69 ½” W x 13 ⅜” D x ¾” H
  • Lift Opening:
    • 30 ⅜” W x 14 ¼” D x 16 ¾” H
  • Caddy Dimensions:
    • 34 ⅜” W x 28 ⅝” D x 25 ¼” H
  • Caddy Cubby:
    • 23 ⅜” W x 32” D x 28 ½” H
  • Caddy Small Drawer:
    • 29 ⅝” W x 14 ⅜” D x 3 ⅜ ” H
  • Caddy Large Drawer:
    • 29 ½ ” W x 15” D x 3 ¼” H

ASSEMBLY INSTRUCTIONS

Your Diva will arrive fully assembled, but please be sure to watch the following video before it arrives
Minimize your space with this unique corner cabinet with a sewing machine lift!  

CABINET SPECIFICATIONS

  • Cabinet Dimensions:
    • 46 ½” W x 39” D x 30” H
      • Width is measured from back corner to right or left side
  • MOD Corner Cabinet is ideal for Sewing Machines:
    • Up to 45 pounds
    • Maximum Machine Dimensions:
      • Width: 23 ¾” (left to right)
      • Depth: 12 ½” (front to back)
      • Height: 14”
      • Sewing machine opening is beveled
    • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
  • The entire MOD Corner Cabinet features tough melamine laminate, MDF, and composite wood
  • Optional Custom Machine Insert for a flush surface (sold separately)

SEWING MACHINES THAT DO NOT FIT MOD CORNER CABINET

We are aware of the following sewing machines that are too large to fit into the MOD Corner Cabinet:
  • BabyLock – Destiny and Solaris
  • Brother – Dream VX8500D and Luminaire Innov-is XP1
  • Janome – Horizon Memory Craft 15,000
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
  • Elna –  eXpressive 920
    • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

SHIPPING INFORMATION

  • The Corner Cabinet is shipped ready to assemble in 2 separate boxes
  • MOD Corner Cabinet weighs a total of 117 pounds
  • Due to cabinet size, product shipped on a pallet via LTL
  • Cabinets, tables, and chairs cannot be shipped to a PO Box
  • If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUAL

Assembly instructions are included with the cabinet. You may also download the MOD Corner Cabinet manual and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • Hammer/mallet
  • Optional:
    • WD-40
    • Adjustable wrench
This sewing cabinet has a three-position airlift that holds most sewing machines comfortably and moves effortlessly up and down. Room in front of the lift allows for sewers to sit in the correct sewing position.  Cabinet Open:
    • 50 ¾” W x 17 ¼” D x 29 ½” H
  • Cabinet Closed:
    • 25 ½” W x 17 ¼” D x 30 1/8” H
  • Lift Opening, A10:
    • 20 15/16” W x 11 3/8” D x Adjustable Height
*Please measure your machine and include knobs, plugs, etc. that extend beyond the body of machine.
  • Construction: Vinyl laminate/MDF/Composite
  • Dual-Hydraulic Lift Weight Limit: 55 #s
  • Custom Machine Insert Available for machines less than 17-1/2″ wide by 12-1/2″ deep

SEWING MACHINES THAT DO NOT FIT JUDY

We are aware of the following sewing machines that are too large to fit into the Judy. Incompatible Machines:
  • Baby Lock – Destiny & Solaris
  • Brother – Dream VX8500D & Luminaire Innov-is XP1
  • Elna – 920 eXpressive
  • Janome – Horizon Memory Craft 15,000 & Continental M7
    • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flat bed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flat bed position.
The above are the known machines that do not fit properly. Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

This cabinet helps you stay incredibly organized by separating your fabrics and notions. The four rolling casters that lock in place also allow for easy movement so you have storage wherever you need it. Use next to our other popular MOD Squad Product or with any of our cabinets for additional storage space for your sewing and craft needs.

CABINET SPECIFICATIONS

  • Cabinet Dimensions:
    • 29 ⅝” W x 23” D x 30” H
  • Drawer Dimensions (5):
    • 25 ¼” W x 16 ¼” D x 3” H
  • The entire MOD 5 Drawer Caddy features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

  • The cabinet is shipped ready to assemble in 2 separate boxes
  • The MOD 5 Drawer Caddy weighs a total of 123 pounds
  • Arrow determines shipping carrier, FedEx or UPS
  • Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY MANUAL

Assembly instructions are included with the cabinet. You may also download the MOD 5 Drawer Caddy manual and save it to your computer. For assembly, you’ll need:
  • Phillips screwdriver with #2 head or power screwdriver
  • ⅛ Drill Bit
  • Level
  • Clamp
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information