Creative Set

• Applique Presser Foot
• Cording and Embroidery Presser Foot
• Pearl Attaching Presser Foot (for 3 cords)
• Presser Foot with Guide
• Open Toe Presser Foot
• Bobbin x5

This guide is used for sewing parallel rows of stitching that are equally spaced.

• This guide, installed on either side of the needle, can be used for stitching on either the left or the right side.

• With marks on the guide bar at a 1/5" (5 mm) spacing, this guide can be moved as far as 2.32" (60 mm) to the left or right side of the needle.

• Juki TL models include Juki TL 2010, Juki TL15, Juki TL2010Q, Juki TL2200, Juki TL2000Q, Juki TL 2000QI, Juki TL98, Juki TL18 Haruka, Juki TL2020PE, Juki 2200QVP Mini sewing machines.

Part Number: 40171424

This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. The gauge can be swung toward you so that it is out of the way when not in use.

• The guide, being short at the front and back, makes this gauge perfect for sewing gentle curves

• The gauge can be moved as far as 1.2" (30 mm) from the needle and secured by loosening and tightening the screws with a screwdriver.

Compatible with Juki TL machines and J-150 QVP. Such as:

• • Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: A9847D250A0

Sewists use this seam guide with their gauge to get an accurate seam allowance!

This guide is used for setting the folded width of the fabric and the stitching position for coverstitching.

• This guide can set the folded width of the fabric and align the edge of the fabric from the back side, where it is difficult to see the coverstitching. First fold the fabric to the width that is to be sewn, and then adjust the guide according to the width of the fold. This guide is perfect for finishing pant and sleeve hems of clothes.

Series & Part Number

• MO-735: 40122229
• MCS-1500: 40177371
• MCS-1700QVP: 40177371

This presser foot is used for sewing on nylon thread or wire for crafts.

• Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.

Series & Part Number

• MO-2800: 40138099
• MO-1000: 40138099
• MO-735: A9820-655-0A0A
• MO-114D/104D: A9820-655-0A0A
• MO-655: A9820-655-0A0A
• MO654DE/MO-644: A9820-655-0A0A
• MO-623: A9820-655-0A0A
• MO-1200QVP: A9820-655-0A0A
• MO-2000QVP: 40138099

This presser foot is used for sewing on piping while overlocking the edge of the fabric.

• Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.

Series & Part Number

• MO-2800: 40138103
• MO-1000: 40138103
• MO-735: A9865-655-0A0A
• MO-114D/104D: A9865-655-0A0A
• MO-655: A9865-655-0A0A
• MO654DE/MO-644: A9865-655-0A0A
• MO-623: A9865-655-0A0A
• MO-50e: 40131950
• MO-80CB: 40131950
• MO-1200QVP: A9865-655-0A0A
• MO-2000QVP: 40138103