CORNER CABINET

CABINET SPECIFICATIONS

• Cabinet Dimensions:
  • 46 ½” W x 39” D x 30” H
    • Width is measured from back corner to right or left side
• MOD Corner Cabinet is ideal for Sewing Machines:
  • Up to 45 pounds
  • Maximum Machine Dimensions:
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14”
    • Sewing machine opening is beveled
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire MOD Corner Cabinet features tough melamine laminate, MDF, and composite wood
• Optional Custom Machine Insert for a flush surface (sold separately)

SEWING MACHINES THAT DO NOT FIT MOD CORNER CABINET

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

SHIPPING INFORMATION

• The Corner Cabinet is shipped ready to assemble in 2 separate boxes
• MOD Corner Cabinet weighs a total of 117 pounds
• Due to cabinet size, product shipped on a pallet via LTL
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUAL

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

• Kangaroo II Cabinet Dimensions
  • Open (quilt leaf out)
    • 55 ⅝” W x 40 ½” D x 29 ½ H
  • Closed
    • 55 ⅝” W x 21” D x 29 ½ H
• Joey II Dimensions
  • 25 ¾” W x 16 ½” D x 24″ H
  • Top two drawer dimensions:
    • 22 ½ ” W x 13″ D x 2 ½” H
  • Bottom drawer dimensions:
    • 22 ½ ” W x 13″ D x 8″ H
• Sewing Machines that Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23-3/4” (left to right)
    • Depth: 12-1/2” (front to back)
    • Height: 14-1/2”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Both products made from melamine laminate, MDF, and composite
• Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

• BabyLock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five boxes
• Kangaroo II weighs a total of 156 pounds
• Joey II weighs a total of 60 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Optional:
  • WD-40
  • Adjustable wrench

The dingo cutting table has an exceptional amount of storage that is the perfect addition to your sewing room.

CABINET DIMENSIONS

• Dimensions Closed:
  • 46 ¼” W x 21 ¼” D x 35 ¼” H
• Dimensions Open (leaf open):
  • 46 ¼” W x 40 ½” D x 34 ¼” H
• Drawer Dimensions:
  • All nine drawers are19 ¾” W (left to right)
  • All nine drawers are 15” D (front to back)
  • Drawer Heights (top to bottom):
    • Seven of the drawers are 3 ¼” H
    • Bottom left drawer is 7 ⅛” H
    • Bottom right drawer is 12 ¼” H
      • The drawer is large enough to store a small serger with a weight limit of 20 pounds

SHIPPING INFORMATION

• The Dingo II Cutting and Storage Cabinet is shipped ready to assemble in four separate boxes
• The Dingo II Cutting and Storage Cabinet weights a total of 218 pounds
• Cabinets, tables, and chairs cannot be shipped to a PO Box

TABLE SPECIFICATIONS

• Table Dimensions:
  • Legs Unfolded: 40 ¼” W x 19 ¾” D x 28 ½” H
  • Legs Folded: 40 ¼” W x 19 ¾” D x 4 ½” H
• The Heavyweight Table has an adjustable platform so it will accommodate the Singer Featherweight™ 221K and 222K
• No need for custom insert, 221K and 222K fit perfectly
• Construction: Melamine/MDF with Steel Legs
• Manual Platform Weight Limit: 45 lbs

SHIPPING INFORMATION

• The Heavyweight Table arrives fully assembled in one box
• Shipped by FedEx or UPS
• Weighs a total of 37 pounds
• Cannot be shipped to a PO Box

The Ava J Embroidery Cabinet is specially made for large and heavy industrial machines the perfect fit for your Juki, Janome and Elna. With three storage drawers, two cubbies and a pull-out thread space capable of holding 49 standard embroidery spools, everything will have a perfect place on this table insuring to keep you organized.

CABINET SPECIFICATIONS

• Ava B Opening:
  • 12 ½” W
• Ava J Opening:
  • 7 ½” W
• Dimensions:
  • 35 ½” W x 23 ½” D X 35″ H
• 2 Drawer Dimensions:
  • 26 ¾” W x 16″ D x 2″ H
• Single Drawer Dimensions:
  • 13″ W x 16 ¼” D x 5 ½” H
• 2 Cubby Dimensions:
  • 13″ W x 22 ¾” D x 7″ H
• Side Storage Shelf Dimensions:
  • 3 ¼” W x 21 ¾” D x 6″ H

SHIPPING INFORMATION

• The Ava ships ready to assemble in four boxes.
• Ava weighs a total of 199 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench

Just like her younger sister (the Gidget I), the Gidget II Table is a self-contained, fully collapsible workstation. Once she arrives, you’ll be saying goodbye to the wiggles, wobbles and general woes of other sewing tables.

But that doesn’t mean she can’t easily be stored or transported. With velcro straps to secure her steel locking legs and dual-wheel roller design, transportation to classes, retreats and even your RV is a breeze.

What’s more, an increased opening size of 23 ½” W x 12 ½” D, means the Gidget II Table is capable of supporting a 45-pound machine!

Find out more about the Gidget II table below!

Table Specifications

• Dimensions Open:
  • 40 ¼” W x 19 ¾” D x 28 ½” H
• Dimensions with Legs Folded:
  • 40 ¼” W x 19 ¾” D x 4 ½” H
• The Gidget II Table will accommodate sewing machines no larger than:
  • 23 ½” W (left to right)
  • 12 ¼” D (front to back)
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.

SHIPPING INFORMATION

COMPARE GIDGET I VS. GIDGET II