What it's Used For:

This foot is used for free motion quilting with cording and yarn.

• This presser foot has a hole for feeding the cording under the needle to be sewed down.

• When doing this, make sure you lower your feed dogs, so you can freely quilt your designs.
• This is great for adding dimensional free motion quilting and embroidery designs on sewing projects.
• There is a screw on the back of this foot that will allow you to adjust the height of the foot so you can move freely. 
• This foot will fit the Juki NX7*, DX3000QVP*, DX4000QVP*, DX5, DX7, DX2000QVP, DX-1500, F600, F400, F300, G220, G120, HZL-HT710, HZL-HT740.
• * Please note for the bolded machines you MUST use an adapter shank when using this on the foot.