What it's Used For:

This presser foot is designed for attaching bias tape while neatly finishing the edge of fabric with a final binding width of approximately 0.2” (5mm).

• It works by feeding bias tape—ranging from 0.75” to 1” (22 to 25mm) wide—through the guide. The foot then folds the tape in half twice (creating double-fold bias tape) and stitches it onto the fabric edge in one step.
• You can also use single-fold bias tape measuring about 0.4” to 0.5” (10 to 13mm) wide. The guide can be adjusted left or right to fine-tune the needle position for perfect placement.
• This foot will fit the Juki NX7, DX3000QVP, DX4000QVP, DX5, DX7, DX2000QVP, DX-1500, F600, F400, F300, G220, G120, HZL-HT710, HZL-HT740.