juki1508N

Juki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine

$3,599.00

The Juki LU-1508N series is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for
general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

SKU: JUKI-1508N Category: Tags: , , , , , , ,

Description

1-Needle, Unison Feed, Lockstitch Machine With Vertical-axis Large Hook

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar stroke of 38mm and long 190R needle, the compound feed machine supports the sewing of extra heavy materials. The walking foot machine comes with an extra-large steel handwheel with a diameter as large as φ175.

A new feed mechanism with a rectangular feeding motion prevents stitch gathering

The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering.

The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.

The alternating vertical movement mechanism prevents irregular stitches

The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes.

Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches.

The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of the material.

Consistent seam quality

With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors.

With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.

Higher lift of the presser foot

The high, 16mm foot lift enables easy material handling.

The machine comes with a dual-tension mechanism

The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.

The highly efficient vertical-axis double-capacity hook is equipped as standard

With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.

Improved operability

The stitch length can be easily selected by the stitch dial.

The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160).

A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.)

The machine is a full-open-type top design that makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head.

The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.

Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

Standard Features

  • A new feed mechanism with a rectangular feeding motion prevents stitch gathering
  • The alternating vertical movement mechanism prevents irregular stitches
  • Consistent seam quality
  • Higher lift of the presser foot
  • The machine comes with a dual-tension mechanism
  • The highly efficient vertical-axis double-capacity hook is equipped as standard
  • Improved operability

Standard Accessories

Standard Accessory List Coming Soon!

Optional Accessories

Optional Accessory List Coming Soon!

Catalogs


Machine Catalog

Machine Manual

Video Tutorials

Quick Comparison

Juki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine removeClover Chacopel Fine Pencils - 3 pcs. removeStitch in the Ditch Quilting Foot removeJuki Travel Bag removeJUKI Lower Thread Guide Assembly removeJUKI DDL-9000C Series Industrial Machine remove
NameJuki LU-1508N Heavy Duty Industrial Single Needle Walking Foot Machine removeClover Chacopel Fine Pencils - 3 pcs. removeStitch in the Ditch Quilting Foot removeJuki Travel Bag removeJUKI Lower Thread Guide Assembly removeJUKI DDL-9000C Series Industrial Machine remove
Imagejuki1508Ncloverchacopencilsintheditchfootjukitrolleybagsmalltension asm guideDDL9000MAIN
SKUJUKI-1508N418CVJANOME-76782410914194-DS19213-55755DDL-9000CSeries
Rating
Price$3,599.00$8.49$18.99$129.00 – $149.99$27.99$2,199.99 – $2,799.99
Stock

4 in stock

Availability4 in stock
Add to cart

Add to cart

Add to cart

Add to cart

Select options

Add to cart

Select options

DescriptionThe Juki LU-1508N series is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.		Clover Chacopel Fine Pencils include a white, yellow and pink/blue marking pencils, 2 caps with brushes and 1 sharpener. Use with laundry detergent to remove marking. Please try on sample fabric before using. Color: White, Yellow, Pink and Blue Made of: Plastic Use: Marker Included: three ToolsThis foot is from Janome, and was designed to fit the Janome Hd9, and 1600P which are high shank machines. You know what is also a high shank machine? The Juki TL machines! We only offer the best of the best for you all, and we test everything and make sure to set you up for success before making any claims, or selling any off brand or not true Juki parts. This is compatible with:
  • Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.
 		The Juki Trolley bag is a available in size large and small to fit most of the Juki Machines available. The large trolley bag is perfect for the Kirei HZL-NX7 and Sayaka DX-3000QVP while the small trolley bag is perfect for most sewing machines and sergers on the Juki product line. The ability to load your machine via the front or top load makes transporting your machines easy. Dimensions for Large trolley bag: 23" W x 16" H x 12.5" D Dimensions for Small trolley bag: 10" (w) x 19" (l) x 16" (h)
Part # : 213-55755 (21355755)
  •  Reference #23 in the Juki DNU-1541 manual found on page labeled "Lower Thread Winder Mechanisms Components"
  • When purchasing this product, you will also need the screw (#31) to attach the piece properly
Direct-drive, high-speed, sewing system with automatic thread trimmer Commitment to “seam quality” is poised to enter a new era with JUKI’s next-generation sewing system. The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience. Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly suit the materials being sewn. What's the difference between the heavier models such as the Juki DDL-9000 FSH -Juki DDL-9000 SSH and the Juki DDL-9000 FMS- DDL-9000 SMS.  These models that have an H  are dedicated to Heavy-Weight sewing only. These models have more aggressive feed dogs, stronger needle bar stroke, and the needle sizes are larger such as a range from  #20-23. The standard needle size that comes with the machine is a 21. The models without the H have a needle range capability from 9-18. It is recommended to speak to our Industrial Machine Specialist when buying industrials. Freight Charges Apply: After your purchase we will contact you with the final freight amount. Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

Content

1-Needle, Unison Feed, Lockstitch Machine With Vertical-axis Large Hook

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar stroke of 38mm and long 190R needle, the compound feed machine supports the sewing of extra heavy materials. The walking foot machine comes with an extra-large steel handwheel with a diameter as large as φ175.

A new feed mechanism with a rectangular feeding motion prevents stitch gathering

The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering. The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration.

The alternating vertical movement mechanism prevents irregular stitches

The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes. Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches. The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of the material.

Consistent seam quality

With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors. With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses.

Higher lift of the presser foot

The high, 16mm foot lift enables easy material handling.

The machine comes with a dual-tension mechanism

The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materials, extending from light- to heavy-weight.

The highly efficient vertical-axis double-capacity hook is equipped as standard

With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.

Improved operability

The stitch length can be easily selected by the stitch dial. The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160). A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.) The machine is a full-open-type top design that makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head. The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button.		Clover Chacopel Fine Pencils include a white, yellow and pink/blue marking pencils, 2 caps with brushes and 1 sharpener. Use with laundry detergent to remove marking. Please try on sample fabric before using. Color: White, Yellow, Pink and Blue Made of: Plastic Use: Marker Included: three Tools

This foot is from Janome, and was designed to fit the Janome Hd9, and 1600P which are high shank machines. You know what is also a high shank machine? The Juki TL machines! We only offer the best of the best for you all, and we test everything and make sure to set you up for success before making any claims, or selling any off brand or not true Juki parts.

This high shank in the ditch foot will fit the Juki TL models including the Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

The Juki Wheeled Trolley bag come in a size large and small with the ability to load your machine via the front or top load.

The large Juki trolley bag can accommodate large machines such as the Kirei HZL-NX7 and Sayaka DX-3000QVP. It features a gray Chenille fabric exterior with gray details and an embroidered JUKI logo. It also comes with a front pocket and two interior mesh wall pockets for easy storage.

Dimensions for Large trolley bag: 23" (W) x 16" (H) x 12.5" (D)

  • What machines does the L trolley bag fit? NX7, DX-3000, DX4000, plus the  Juki DX, TL , HZL machines with LOTS of room on the sides for more fabric!!

The small Juki trolley bag can accommodate most sewing machines and sergers on the Juki product line. It features a gray Chenille fabric exterior with gray details and an embroidered JUKI QVP logo. It also comes with a front pocket and two interior mesh wall pockets for easy storage.

Dimensions for Small trolley bag: 10" (W) x 19" (L) x 16" (H)

  • What machines does the small fit? (Juki DX, TL , HZL and more.)

Part Number: 14194-DS19

Lower Thread Guide Assembly for Juki Industrial Sewing Machines.

  •  Reference #23 in the Juki DNU-1541 manual found on page labeled "Lower Thread Winder Mechanisms Components"
  • When purchasing this product, you will also need the screw (#31) to attach the piece properly
Part # : 213-55755 (21355755)
Compatible with Juki models : DNU-1541, DNU-1541H, DNU-1541S, LS-1340, LS-1341, LS-1342, LU-1508, LU-1508H, LU-1508N, LU-1509N, LU-1510, LU-1510N, LU-1511N, LU-1520N, LU-1560, LU-1560N, LU-1561N, LU-1565N, PLC-1710, PLC-1760
Screenshot 20220527 201407 Samsung Notes
Screenshot 20220527 201407 Samsung Notes

DDL-9000C Series

Direct-drive, high-speed, sewing system with automatic thread trimmer

Commitment to “seam quality” is poised to enter a new era with JUKI’s next-generation sewing system. The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience. Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly suit the materials being sewn.

Vertically- and horizontally-driven digital feed mechanism

Thanks to the world's first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease according to the material fabric of product to be sewn, thereby improving seam quality. Thanks to this digital feed mechanism, thread trimming is carried out with the feed dog lowered in the case the shorter-thread remaining thread trimming function is enabled. As a result, the clearance provided between the throat plate and the material is eliminated, thereby stabilizing the length of thread remaining after thread trimming. The feed dog does not protrude the top surface of throat plate when the sewing machine stops with its needle bar up, thereby facilitating placement/removal of the material on/from the top surface of throat plate and preventing the material from being damaged by the feed dog.

Various kinds of feed locus can be selected.

Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn.

Digital functions which accentuate excellent "seam" quality

Ⅰ. Adoption of the needle-thread active tension - Needle tension is digitally controlled
Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this the DDL-900C, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Example: Needle-thread active tension demonstrates its effectiveness in the topstitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.
Ⅱ. Active presser foot pressure mechanism - The presser foot pressure is digitally controlled
The DDL-9000C has a digital control system that controls the presser foot pressure. Under the automatic mode, the multi-layered section detection function detects changes in material thickness to increase/decrease the presser foot pressure accordingly. Under the manual mode, the presser foot pressure control function is assigned to the hand switch to enable operation with the hand switch.
Ⅲ. Needle thread clamp
The device clamps the needle thread and draws it under the material at the beginning of sewing. The needle thread clamp device works to reduce the size of thread tangling in on the wrong side of the material. This expands the area around the needle entry, thereby allowing the use of various gauge components.

Management of sewing performance and the DDL-9000C sewing machine by the utilization of IoT (Internet of Things)

Management, browsing and editing of data can be carried out on the application software

Data on the DDL-9000C sewing machine adjustments made according to the product to be sewn can be transferred to a commercially-available Android tablet in contactless mode. This enables quick check for uniform settings as well as confirmation of conditions of sewing machines in a sewing line, thereby facilitating setup changes. The operation panel is also provided as standard with a USB port. Data management and software update can be carried out with ease using a USB thumb drive. Data items of sewing can be numerically managed to ensure "stable quality" and "reduction in time required for setup changes". Quantified sewing data can be externally taken from the sewing machine using an Android tablet or USB thumb drive.

LED Light on the DDL-9000C

The LED light illuminates the needle entry area in the just-under direction from the right and left sides of the needle bar. In comparison with the single-direction illumination, this LED light helps the operator carry out sewing more easily. Illuminance of the LED light is adjustable in five levels. It can also be used as an auxiliary lamp for working.
MODEL DDL-9000C-FMS DDL-9000C-FSH DDL-9000C-SMS DDL-9000C-SSH
Type Full Digital Type Digital Type
Application Medium-weight Heavy-weight Medium-weight Heavy-weight
Lubrication Semi-dry Minute-quantity lubrication Semi-dry Minute-quantity lubrication
Max. sewing speed 5,000sti/min*1 4,500sti/min*2 5,000sti/min*1 4,500sti/min*2
Hand switch Provided as standard (At the time of shipment: Hand switches are assigned respectively with the touch-back switch function and the one-touch changeover switch function.)
Max. stitch length 5mm
Thread trimming method Double-edge rotary system
Needle bar stroke 30.7mm 35.0mm 30.7mm 35.0mm
Feed dog height 0.8mm 1.2mm 0.8mm 1.2mm
Needle thread tension Active tension Spring type
Presser foot pressure Electronic control Spring type
Needle*3 DB×1・DB×5（#11 #9～18（Nm65～110） DB×1・DB×5（#21） #20～23（Nm125～160） DB×1・DB×5（#11） #9～18（Nm65～110） DB×1・DB×5（#21） #20～23（Nm125～160）
Lift of the presser foot By hand: 5.5mm, By knee: 15mm Auto: 1st stage 5.0 mm （*0.1～8.5mm）, 2nd stage 8.5 mm （*8.5mm～13.5mm） * Adjustable on the operation panel
Bobbin thread winder Built in the top of machine head (provided with the bobbin thread retaining plate)
Lubricating oil JUKI New Defrix Oil No. 1 or JUKI CORPORATION GENUINE OIL 7 (equivalent to ISO VG7)
Size of bed 517×178mm（distance from needle to machine arm：303mm）
Machine head drive Compact AC servomotor (400W) that is directly connected to the main shaft (direct-drive system)
Power consumption 520VA
Net weight Machine head： 40.5kg（with AK-154）
＊"sti/min" stands for "Stitches per Minute." ＊1 Stitch length of 4.00 mm or less: 5,000 sti/min; Stitch length of 4,05 - 5.00 mm: 4,000 sti/min ＊2 Stitch length of 4.00 or less: 4,500sti/min; Stitch length of 4.05 - 5.00mm: 4,000sti/min ＊3 Differs on a destination-by-destination basis The walking foot, Bobbins, Bobbin Case, throat plate, and needles of the Juki TL models are NOT compatible with the Juki DDL-9000C, but the rest of the feet and accessories are. Please see list of compatible items below: Feet:  Bag Makers Recommendation for Vinyls: https://jukijunkies.com/product/smooth-foot/ Needles: https://jukijunkies.com/product/juki-dbx110x18-needles/ https://jukijunkies.com/product/juki-dbx110x14-needles/ Bobbins : https://jukijunkies.com/product/juki-bobbin-22964001-5-pk/ In this LINK: https://jukijunkies.com/wp-content/uploads/machine-pdfs/catalogs/DDL9000C_catalog.pdf you will see a chart with SPECIFICATIONS ON the bottom right. Get to know this. This chart is on this page too.     
WeightN/AN/AN/AN/AN/A90 lbs
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Machine Type

Machine

, , , ,

Fiber Content

Machine

, , ,

Weight 90 lbs
Select your Machine Model

DDL-9000C-FMS, DDL-9000C-FSH, DDL-9000C-SMS, DDL-9000C-SSH
Specifications

Type: Full digital type
Application: Medium-weight
Lubrication: semi-dry
Max. sewing speed: 5,000sti/min*1
Max. stitch length: 5mm
Needle bar stroke: 30.7mm
Feed dog height: 0.8mm
Needle : DB×1・DB×5（#11）#9～18（Nm65～110)
Size of bed: 517x178mm (distance from needle to machine arm: 303mm)
Power consumption: 520VA
Net weight: 90lbs. (machine head)
Want Casters?

Yes, Please, No, Thanks

Related products