Untitled 1 x 1 in
LS 1340 09a E
LS 1341 Space Saver
2
1341

Juki LS-1341 Cylinder Bed Industrial Sewing Machine

$5,200.00 – $5,399.00

The LS Series offers a consistent stitching pitch and outstanding ability to sew sharp curves. This makes the machine ideal for sewing tubular articles.

Freight Charges Apply:

After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck.

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

SKU: JUKILS1341 Category: Tags: , ,

Description

The LS Series offers a consistent stitching pitch and outstanding ability to sew sharp curves. This makes the machine ideal for sewing tubular articles.

Freight Charges Apply: After your purchase we will contact you with the final amount.

Please select Freight Charges Starting at: $299.00  upon check out to select the minimum charge. 

Features:

Sewing capabilities and feed performance that respond to a broad range of uses in the sewing of
heavy materials. With its larger needle bar stroke, larger lift of the presser foot, and newly adopted
double-tension mechanism, the machine sews beautifully with thick threads (low count thread) and at
higher thread tensions. This allows the machine to sew a broad range of heavy materials.

The Space Saver Stand options allows the machine bed to stick out from the left hand side of the table allowing an opening or free arm advantage. This table is 20 x 27.

Regular Table is  20×48

LENGHT AND CIRCUMFERENCE OF CYLINDER: DIAMETER 72 MM….LENGTH IS ABOUT 10 INCHES

The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance.
In addition, the ratio between the alternating vertical movements of the walking foot and presser foot
remains unchanged even when the material thickness changes. With this feature, the machine sews
multi-layered parts of the material consistently and without stitch gathering.
The machine is equipped as standard with a mechanism to correct uneven material feed by
making-micro adjustments to the bottom-feed. Compared with the elliptical feed, the rectangular feed
helps reduce gathered stitches.

The slimmed-down throat plate easily adjusts to the sewing of small tubular articles with diameters as small as φ40mm. This enhances the machine’s ability to smoothly sew not only bags and shoes, but also small article such as wallets. The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance.

 

ls1340_brochure

ls1340_catalog

Additional information

Select Package

LS-1341 + Space Saver Table, LS-1341 + Regular Table

Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

Standard Features

Oops, Nothing Found

Standard Accessories

Standard Accessory List Coming Soon!

Optional Accessories

Optional Accessory List Coming Soon!

Catalogs


Machine Catalog

Machine Manual

Video Tutorials

Quick Comparison

Juki LS-1341 Cylinder Bed Industrial Sewing Machine removeJuki DDL-8700 Single Needle Straight Lockstitch Sewing Machine removeSchmetz 134R Needle System removeJUKI DDL-9000C Series Industrial Machine removePremo Bond Tex 90 in Black 4oz removeJIN NA-11/NA-11UT Direct-drive, 1-needle, Top and Bottom-feed, Lockstitch Machine with Double-capacity Hook remove
NameJuki LS-1341 Cylinder Bed Industrial Sewing Machine removeJuki DDL-8700 Single Needle Straight Lockstitch Sewing Machine removeSchmetz 134R Needle System removeJUKI DDL-9000C Series Industrial Machine removePremo Bond Tex 90 in Black 4oz removeJIN NA-11/NA-11UT Direct-drive, 1-needle, Top and Bottom-feed, Lockstitch Machine with Double-capacity Hook remove
ImageUntitled 1 x 1 inDDL9000MAINBPT15664NA11UTmachinemain
SKUJUKILS1341JUKI- DDL 8700SCH-34RDDL-9000CSeriesBPT15664JUKI-NASERIES
Rating
Price$5,200.00 – $5,399.00$829.99 – $1,157.99$4.99$2,199.99 – $2,799.99$15.99$1,399.00 – $1,499.00
Stock

1 in stock

1 in stock

22 in stock

Availability1 in stock1 in stock22 in stock
Add to cart

Select options

Select options

Select options

Select options

Add to cart

Select options

DescriptionThe LS Series offers a consistent stitching pitch and outstanding ability to sew sharp curves. This makes the machine ideal for sewing tubular articles.

Freight Charges Apply:

After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

This item ships from our warehouse. Item is shipped by freight in a semi truck. Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.		The Juki DDL 8700 is a sewing machine that can help you complete sewing projects fast and easy,  This sewing machine can sew up to 5,500 stitches per minute. The maximum stitch length of this sewing machine is 5mm which provides greater freedom in completing your sewing tasks.

Freight Charges Apply: After your purchase, we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table comes assembled

SHOP BOBBINS HERE This item ships from our warehouse. Item is shipped by freight in a semi truck. Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.		Size: 90/14, 100/16, 110/18, and 125/20 Feature: Standard Sharp Point needle tip Fabric Use: The round point needles can be used with most fabrics such as quilting cottons.
  • Also known as 135x5, 135x7, 135x25, 1901, DPx5, and DPx7.
    • Size 16 is recommended for Juki  longarms with Glide 40 for quilts with panels, blocks and normal seams. Size 18 is recommended for heavier seams that will have more density such as a Lonestar Quilt. Size 14 is not a recommended size for longarms.
      • Quantity: Ten (10) needles per card.

↓ See below for more information ↓

Direct-drive, high-speed, sewing system with automatic thread trimmer Commitment to “seam quality” is poised to enter a new era with JUKI’s next-generation sewing system. The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience. Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly suit the materials being sewn. What's the difference between the heavier models such as the Juki DDL-9000 FSH -Juki DDL-9000 SSH and the Juki DDL-9000 FMS- DDL-9000 SMS.  These models that have an H  are dedicated to Heavy-Weight sewing only. These models have more aggressive feed dogs, stronger needle bar stroke, and the needle sizes are larger such as a range from  #20-23. The standard needle size that comes with the machine is a 21. The models without the H have a needle range capability from 9-18. It is recommended to speak to our Industrial Machine Specialist when buying industrials. Freight Charges Apply: After your purchase we will contact you with the final freight amount. Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.

  • Bleed Resistant
  • Excellent durability for outdoor and industrial projects
  • Anti-wicking and mildew resistant
  • 30% stronger than industry standard
  • Made in the USA
NA-11 series is suited to the sewing and decorative shape-tacking of heavy-weight materials such as sofa, bags and stroller, etc.

Freight Charges Apply: After your purchase we will contact you with the final freight amount. 

Please select “Freight Charges” upon check-out starting at $299.00; the minimum charge. 

Table and motor comes fully assembled to ensure a safe delivery. We do not ship unassembled due to the amount of damage that we see happen when that’s done. All that’s needed is the  machine head to be mounted and thread stand to be assembled.
ContentThe LS Series offers a consistent stitching pitch and outstanding ability to sew sharp curves. This makes the machine ideal for sewing tubular articles. Freight Charges Apply: After your purchase we will contact you with the final amount. Please select Freight Charges Starting at: $299.00  upon check out to select the minimum charge.  Features: Sewing capabilities and feed performance that respond to a broad range of uses in the sewing of heavy materials. With its larger needle bar stroke, larger lift of the presser foot, and newly adopted double-tension mechanism, the machine sews beautifully with thick threads (low count thread) and at higher thread tensions. This allows the machine to sew a broad range of heavy materials. The Space Saver Stand options allows the machine bed to stick out from the left hand side of the table allowing an opening or free arm advantage. This table is 20 x 27. Regular Table is  20x48
LENGHT AND CIRCUMFERENCE OF CYLINDER: DIAMETER 72 MM....LENGTH IS ABOUT 10 INCHES
The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance. In addition, the ratio between the alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes. With this feature, the machine sews multi-layered parts of the material consistently and without stitch gathering. The machine is equipped as standard with a mechanism to correct uneven material feed by making-micro adjustments to the bottom-feed. Compared with the elliptical feed, the rectangular feed helps reduce gathered stitches. The slimmed-down throat plate easily adjusts to the sewing of small tubular articles with diameters as small as φ40mm. This enhances the machine's ability to smoothly sew not only bags and shoes, but also small article such as wallets. The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance.   ls1340_brochure ls1340_catalog

The Juki DDL-8700 High-speed Single Needle Straight Lockstitch Industrial Sewing Machine with Table and Servo Motor

Newly designed machine head that was developed in pursuit of beauty, This machine inherits desirable features, such as high-speed stitching performance 5,500SPM, extreme stitching performance, ease of operation, and reliability, from the highly evaluated previous JUKI lockstitch machines. The higher lift of the presser foot lifts up to 13mm/ 0.512" making it ideal for medium weight and lightweight fabrics. Exceptional for tailors, fashion designers, and dressmakers. The machine has a 10.5 inch throat.  The 110-volt servo motor isn’t only quieter and powerful but stitching speed can be controlled by a variable rheostat dial with a span from 0 to 3300 RPM. DDL 8700 - Timing is for a size 9-18 needle.  16x257 needle system (thinner shank needle) DDL 8700H -Timing is for size 16-22. 135x5 needle system (thicker needle shank). Comes with Heavier feed dogs, heavier stitch plate,  larger foot and   higher needle stroke.  

Recommended for:  Light to medium weight fabrics.  The heaviest would be 3 layers of denim. Perfect for quilters that would to piece with speed. 

  This Juki DDL-8700 works great for alterations and dress making.

This product weighs 28 Ibs, machine comes disassembled.  The machine provides a great amount of arm space . Therefore, you will never feel limited when performing a stitch task. This also will enable you to complete larger and spacious sewing tasks. The machine unit includes a dual-spool thread stand and an individually installed bobbin winder. The unit includes a great knee lifter at the bottom that can be utilized to lower or raise the foot. All you have to do is add the belt to the motor, assemble spool holder and tension dials.  Additionally,  machine needs to be dropped into table with safety clips. Returns: Due to the delivery and size of the machine returns are not accepted.  Variations: Due to the nature of industrial sewing machines table colors may vary. Disclaimer: Industrial machines are tough, but due to their weight there may be some minor scratches on the head or the table during shipping. This is normal when shipping industrial sewing machines.

Delivery: Juki DDL-8700 Curbside delivery by freight. The table comes assembled on a palette and the machine in a box.

Freight Charges Apply: After your purchase we will contact you with the final amount. Please select Freight Charges Starting at: $299.00  upon check out to select the minimum charge.  For additional information we recommend you look at the brochure below this section and the features tab. 

System 134R is generally used in single needle lockstitch industrial sewing machines. These needles are used with Juki Longarm machines including sit downs (Miyabi J-350QVP, Miyabi QVP S, and TL-2200QVP and TL-2200QVP S).

Schmetz 134R Industrial needles use systems 135x5, 135x7, 135x25, 1901, DPx5, and DPx7.

 Needle Size
 90/14, 100/16, 110/18, and 125/20
Needle Tip
Standard Sharp Point needle tip
Needle System
DPx5, 135x5, SY 1955
Recommended Fabrics
The round point needles work well with most fabrics such as wovens, leather, films, and more.
CANU: 20:05 1

DDL-9000C Series

Direct-drive, high-speed, sewing system with automatic thread trimmer

Commitment to “seam quality” is poised to enter a new era with JUKI’s next-generation sewing system. The change is driven by digitalization. Until recently, sewing machines have been adjusted by human operators based on personal hunches and experience. Now, with JUKI's digital sewing system DDL-9000C, sewing machine adjustments are fully digitalized. The settings can be reproduced with total accuracy to perfectly suit the materials being sewn.

Vertically- and horizontally-driven digital feed mechanism

Thanks to the world's first vertically-driven digital feed mechanism, the feed dog height can be adjusted with ease according to the material fabric of product to be sewn, thereby improving seam quality. Thanks to this digital feed mechanism, thread trimming is carried out with the feed dog lowered in the case the shorter-thread remaining thread trimming function is enabled. As a result, the clearance provided between the throat plate and the material is eliminated, thereby stabilizing the length of thread remaining after thread trimming. The feed dog does not protrude the top surface of throat plate when the sewing machine stops with its needle bar up, thereby facilitating placement/removal of the material on/from the top surface of throat plate and preventing the material from being damaged by the feed dog.

Various kinds of feed locus can be selected.

Digitalized vertically- and horizontally-driven feed mechanism allows easy adjustment of settings such as the feed locus only on the operation panel according to the material to be sewn.

Digital functions which accentuate excellent "seam" quality

Ⅰ. Adoption of the needle-thread active tension - Needle tension is digitally controlled
Needle thread tension which matches sewing conditions given can be set on the operation panel and stored in memory. The needle thread tension adjustment needs experience. However, for this the DDL-900C, thread tension data stored in memory is reproducible, thereby reducing the setup time when the product to be sewn is changed. Example: Needle-thread active tension demonstrates its effectiveness in the topstitching process. For welting shoulders of a difficult-to-sew material, uniform stitches can be produced continuously by appropriately changing the sewing conditions even if the right and left material fabric differ in texture grain.
Ⅱ. Active presser foot pressure mechanism - The presser foot pressure is digitally controlled
The DDL-9000C has a digital control system that controls the presser foot pressure. Under the automatic mode, the multi-layered section detection function detects changes in material thickness to increase/decrease the presser foot pressure accordingly. Under the manual mode, the presser foot pressure control function is assigned to the hand switch to enable operation with the hand switch.
Ⅲ. Needle thread clamp
The device clamps the needle thread and draws it under the material at the beginning of sewing. The needle thread clamp device works to reduce the size of thread tangling in on the wrong side of the material. This expands the area around the needle entry, thereby allowing the use of various gauge components.

Management of sewing performance and the DDL-9000C sewing machine by the utilization of IoT (Internet of Things)

Management, browsing and editing of data can be carried out on the application software

Data on the DDL-9000C sewing machine adjustments made according to the product to be sewn can be transferred to a commercially-available Android tablet in contactless mode. This enables quick check for uniform settings as well as confirmation of conditions of sewing machines in a sewing line, thereby facilitating setup changes. The operation panel is also provided as standard with a USB port. Data management and software update can be carried out with ease using a USB thumb drive. Data items of sewing can be numerically managed to ensure "stable quality" and "reduction in time required for setup changes". Quantified sewing data can be externally taken from the sewing machine using an Android tablet or USB thumb drive.

LED Light on the DDL-9000C

The LED light illuminates the needle entry area in the just-under direction from the right and left sides of the needle bar. In comparison with the single-direction illumination, this LED light helps the operator carry out sewing more easily. Illuminance of the LED light is adjustable in five levels. It can also be used as an auxiliary lamp for working.
MODEL DDL-9000C-FMS DDL-9000C-FSH DDL-9000C-SMS DDL-9000C-SSH
Type Full Digital Type Digital Type
Application Medium-weight Heavy-weight Medium-weight Heavy-weight
Lubrication Semi-dry Minute-quantity lubrication Semi-dry Minute-quantity lubrication
Max. sewing speed 5,000sti/min*1 4,500sti/min*2 5,000sti/min*1 4,500sti/min*2
Hand switch Provided as standard (At the time of shipment: Hand switches are assigned respectively with the touch-back switch function and the one-touch changeover switch function.)
Max. stitch length 5mm
Thread trimming method Double-edge rotary system
Needle bar stroke 30.7mm 35.0mm 30.7mm 35.0mm
Feed dog height 0.8mm 1.2mm 0.8mm 1.2mm
Needle thread tension Active tension Spring type
Presser foot pressure Electronic control Spring type
Needle*3 DB×1・DB×5（#11 #9～18（Nm65～110） DB×1・DB×5（#21） #20～23（Nm125～160） DB×1・DB×5（#11） #9～18（Nm65～110） DB×1・DB×5（#21） #20～23（Nm125～160）
Lift of the presser foot By hand: 5.5mm, By knee: 15mm Auto: 1st stage 5.0 mm （*0.1～8.5mm）, 2nd stage 8.5 mm （*8.5mm～13.5mm） * Adjustable on the operation panel
Bobbin thread winder Built in the top of machine head (provided with the bobbin thread retaining plate)
Lubricating oil JUKI New Defrix Oil No. 1 or JUKI CORPORATION GENUINE OIL 7 (equivalent to ISO VG7)
Size of bed 517×178mm（distance from needle to machine arm：303mm）
Machine head drive Compact AC servomotor (400W) that is directly connected to the main shaft (direct-drive system)
Power consumption 520VA
Net weight Machine head： 40.5kg（with AK-154）
＊"sti/min" stands for "Stitches per Minute." ＊1 Stitch length of 4.00 mm or less: 5,000 sti/min; Stitch length of 4,05 - 5.00 mm: 4,000 sti/min ＊2 Stitch length of 4.00 or less: 4,500sti/min; Stitch length of 4.05 - 5.00mm: 4,000sti/min ＊3 Differs on a destination-by-destination basis The walking foot, Bobbins, Bobbin Case, throat plate, and needles of the Juki TL models are NOT compatible with the Juki DDL-9000C, but the rest of the feet and accessories are. Please see list of compatible items below: Feet:  Bag Makers Recommendation for Vinyls: https://jukijunkies.com/product/smooth-foot/ Needles: https://jukijunkies.com/product/juki-dbx110x18-needles/ https://jukijunkies.com/product/juki-dbx110x14-needles/ Bobbins : https://jukijunkies.com/product/juki-bobbin-22964001-5-pk/ In this LINK: https://jukijunkies.com/wp-content/uploads/machine-pdfs/catalogs/DDL9000C_catalog.pdf you will see a chart with SPECIFICATIONS ON the bottom right. Get to know this. This chart is on this page too.     		Made in the USA, this marine-grade thread is specially formulated to ensure bleed resistance and colorfastness by combining custom-formulated UV dyes and anti-wicking fibers. This thread's proprietary lubricant allows for excellent sewability by dissipating needle heating while being 30% stronger than the standard industry thread. PremoBond's unique anti-wicking and mildew resistant properties make this ideal for moist environment projects--think boats, outdoor furniture, awnings, etc. Material: high-quality bonded polyester Usage: canvas, marine canvas and products, tarp, filtration, footwear, luggage, geotextiles, and other industrial projects 4oz (1,087yds) Color: Black Strength: 13.3 lbs Metric Size: 30 Tex Size: 90 Put-Up: 1 lb Needle Size (metric): 120

JUKI NA-11/NA-11UT Direct-drive, 1-needle, Top and Bottom-feed, Lockstitch Machine with Double-capacity Hook

Product Features:

  • Needle thread clamping device

    The needle thread device is standard equipment. As a result, the needle thread at the start of sewing does not come out on the cloth, so the start of sewing beautiful finished seams. Operators use scissors less often and can prevent damage to the material caused by thread picking.

  • Increased productivity by improved operability

    The machine achieves a longer distance from machine arm to needle by adopting a high long arm. This means the machine dramatically increases workability when sewing large products such as sofas and car seats.

  • The direct drive system and the operation panel

    The sewing machine has been integrated with the control box and the operation panel for ease of use. The direct-drive motor system has been adopted by all of the sewing machine. This sewing machine is provided with a high-torque direct-drive motor that supports heavy-weight materials. Thanks to this motor, the sewing machine achieves excellent responsiveness and maintains strong material-penetrating power even when sewing multi-layered parts of material.

  • LED Light

    The LED light is located on the underside of the arm jaw. It reduces operator fatigue and improves work efficiency. It is provided as standard for all models of the NA-11 Series.

  • Feeding mechanism

    The machine’s powerful top & bottom feed demonstrates its performance when sewing leather and heavy fabric. The lift of the presser foot is as high as 16 mm, which responds to the sewing of bucky materials.

  • Horizontal-axis full-rotary double-capacity hook

    The adoption of the horizontal-axis double-capacity hook helps reduce the frequency of bobbin thread replacement, thereby promising sewing work with efficiency. This hook is also helpful not only when sewing with thick thread but also when sewing a long seam length.

  • Mechanism of automatic thread trimmer (NA-11UT)

    The automatic thread trimmer achieves consistent thread trimming regardless of thickness of the thread, i.e., from thin to thick thread. The machine has adopted the rotary thread trimming mechanism which matches, in particular, design stitch with thick thread for furniture and bags. The automatic thread trimmer improves workability and increases productivity. When compared with the sewing machine without a thread trimmer, the NA-11UT substantially decreases the consumption of thread. The knife pressure can be adjusted with the adjusting screw.
https://www.youtube.com/watch?v=f_QyJJcDTHQ&t=7s
WeightN/AN/AN/A90 lbsN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select Package

LS-1341 + Space Saver Table, LS-1341 + Regular Table
Specifications

• Sewing Speed: 5500 SPM
• Feed dog: 3-row
• Max. Stitch Length: 5 mm
• Needle bar stroke: 35 mm
• Dimensions 48 x 36 x 48 inches
Select Machine

DDL 8700, DDL 8700H
Want Casters?

Yes Please!, No Thanks
Want the Needle Positioner?

Yes Please!, No Thanks
Size

90/14, 100/16, 110/18, 125/20
Machine

, , , ,

Needle System

DPx5, 135×5, SY 1955
Specifications

Weight 90 lbs
Select your Machine Model

DDL-9000C-FMS, DDL-9000C-FSH, DDL-9000C-SMS, DDL-9000C-SSH
Specifications

Type: Full digital type
Application: Medium-weight
Lubrication: semi-dry
Max. sewing speed: 5,000sti/min*1
Max. stitch length: 5mm
Needle bar stroke: 30.7mm
Feed dog height: 0.8mm
Needle : DB×1・DB×5（#11）#9～18（Nm65～110)
Size of bed: 517x178mm (distance from needle to machine arm: 303mm)
Power consumption: 520VA
Net weight: 90lbs. (machine head)
Want Casters?

Yes, Please, No, Thanks
Weight N/A
Specifications

, , , , , , , , , , , , , ,

Related products