This presser foot is used for sewing together two pieces of fabric while creating gathers.
This basic presser foot is easy to use in various sewing applications, such as straight lines or curves on medium to heavyweight materials. This foot is your standard foot that comes with your machine, already installed out the box. And actually gives you a SCANT 1/4". Making it just shy of a true 1/4".
This part is compatible with all Juki TL mechanical machines. Such as:
This presser foot is used for sewing on strands of pearls, beads or sequins.
Braiding to a width of up to 4 mm as well as transparent or decorative threads can be sewn on. The strand can also be sewn in the middle of fabric by sewing along a folded edge with flatlock.
Series & Part Number
MO-2800: 40138106
MO-1000: 40138106
MO-735: A9870-634-0A0A
MO-114D/104D: A9870-634-0A0A
MO-655: A9870-634-0A0A
MO654DE/MO-644: A9870-634-0A0A
MO-623: A9870-634-0A0A
MO-50e: 40131949
MO-80CB: 40131949
MO-1200QVP: A9870-634-0A0A
MO-2000QVP: 40138106
This guide is used for sewing parallel rows of stitching that are equally spaced.
This guide, installed on either side of the needle, can be used for stitching on either the left or the right side.
With marks on the guide bar at a 1/5" (5 mm) spacing, this guide can be moved as far as 2.32" (60 mm) to the left or right side of the needle.
This presser foot is used for sewing together two pieces of fabric while creating gathers.
Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 to 2.0
Gathers can also be created in a single piece of fabric.
Series & Part Number
MO-2800: 40138121
MO-1000: 40138121
MO-735: A9860-655-0A0C
MO-114D/104D: A9860-655-0A0C
MO-655: A9860-655-0A0C
MO-654DE/MO-644: A9860-655-0A0C
MO-623: A9860-655-0A0C
MO-50e: 40131948
MO-80CB: 40131948
MO-1200QVP: A9860-655-0A0C
MO-2000QVP: 40138121
This basic presser foot is easy to use in various sewing applications, such as straight lines or curves on medium to heavyweight materials. This foot is your standard foot that comes with your machine, already installed out the box. And actually gives you a SCANT 1/4". Making it just shy of a true 1/4".
This part is compatible with all Juki TL mechanical machines. Such as: