HEAVYWEIGHT TABLE

TABLE SPECIFICATIONS

• Table Dimensions:
  • Legs Unfolded: 40 ¼” W x 19 ¾” D x 28 ½” H
  • Legs Folded: 40 ¼” W x 19 ¾” D x 4 ½” H
• The Heavyweight Table has an adjustable platform so it will accommodate the Singer Featherweight™ 221K and 222K
• No need for custom insert, 221K and 222K fit perfectly
• Construction: Melamine/MDF with Steel Legs
• Manual Platform Weight Limit: 45 lbs

SHIPPING INFORMATION

• The Heavyweight Table arrives fully assembled in one box
• Shipped by FedEx or UPS
• Weighs a total of 37 pounds
• Cannot be shipped to a PO Box

The Ava J Embroidery Cabinet is specially made for large and heavy industrial machines the perfect fit for your Juki, Janome and Elna. With three storage drawers, two cubbies and a pull-out thread space capable of holding 49 standard embroidery spools, everything will have a perfect place on this table insuring to keep you organized.

CABINET SPECIFICATIONS

• Ava B Opening:
  • 12 ½” W
• Ava J Opening:
  • 7 ½” W
• Dimensions:
  • 35 ½” W x 23 ½” D X 35″ H
• 2 Drawer Dimensions:
  • 26 ¾” W x 16″ D x 2″ H
• Single Drawer Dimensions:
  • 13″ W x 16 ¼” D x 5 ½” H
• 2 Cubby Dimensions:
  • 13″ W x 22 ¾” D x 7″ H
• Side Storage Shelf Dimensions:
  • 3 ¼” W x 21 ¾” D x 6″ H

SHIPPING INFORMATION

• The Ava ships ready to assemble in four boxes.
• Ava weighs a total of 199 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench

The dingo cutting table has an exceptional amount of storage that is the perfect addition to your sewing room.

CABINET DIMENSIONS

• Dimensions Closed:
  • 46 ¼” W x 21 ¼” D x 35 ¼” H
• Dimensions Open (leaf open):
  • 46 ¼” W x 40 ½” D x 34 ¼” H
• Drawer Dimensions:
  • All nine drawers are19 ¾” W (left to right)
  • All nine drawers are 15” D (front to back)
  • Drawer Heights (top to bottom):
    • Seven of the drawers are 3 ¼” H
    • Bottom left drawer is 7 ⅛” H
    • Bottom right drawer is 12 ¼” H
      • The drawer is large enough to store a small serger with a weight limit of 20 pounds

SHIPPING INFORMATION

• The Dingo II Cutting and Storage Cabinet is shipped ready to assemble in four separate boxes
• The Dingo II Cutting and Storage Cabinet weights a total of 218 pounds
• Cabinets, tables, and chairs cannot be shipped to a PO Box

• • 50 ¾” W x 17 ¼” D x 29 ½” H
• Cabinet Closed:
  • 25 ½” W x 17 ¼” D x 30 1/8” H
• Lift Opening, A10:
  • 20 15/16” W x 11 3/8” D x Adjustable Height

• Construction: Vinyl laminate/MDF/Composite
• Dual-Hydraulic Lift Weight Limit: 55 #s
• Custom Machine Insert Available for machines less than 17-1/2″ wide by 12-1/2″ deep

SEWING MACHINES THAT DO NOT FIT JUDY

• Baby Lock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Elna – 920 eXpressive
• Janome – Horizon Memory Craft 15,000 & Continental M7
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flat bed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flat bed position.

This never ending workspace is what you didn't know you needed in your sewing or craft room, The cabinet, quilt leaf and rolling caddy included offers 31 ½ square feet, ensuring you have enough room to take on bigger projects.

This cabinet comes in both Teak and Ash White.

CABINET SPECIFICATIONS

• Open Cabinet Dimensions:
  • Quilt leaf open & rolling caddy extended in front:
    • 100 ½” W x 80 ¼” D x 29 ½” H
  • Quilt leaf folded down and the rolling caddy is tucked away:
    • 100 ½” W x 22 ¼” D x 29 ½” H
  • Closed Dimensions:
    • 49 ¾” W x 22 ¼” D x 30 ¼” H
• Caddy Dimensions:
  • 13 ⅜” W x 16″ D x 13 ½ ” H
  • Drawer Dimensions (two drawers)
    • 11″ W x 11 ⅛” D x 2 ¾” H
• Door Bin Dimensions:
  • Large: 17″ W x 5 ¼” D x 5 ¼” H
  • Small: 17” W x 3 ⅛” D x 3 ⅛” H
• Aussie II is ideal for Sewing Machines:
  • Up to 55 pounds
  • Maximum Machine dimensions:
    • Width: 23 ¾”  (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire Aussie II features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT INTO THE AUSSIE II

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna – eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

CABINET SPECIFICATIONS

• Open Cabinet Dimensions:
  • Quilt leaf open & rolling caddy extended in front:
    • 100 ½” W x 80 ¼” D x 29 ½” H
  • Quilt leaf folded down and the rolling caddy is tucked away:
    • 100 ½” W x 22 ¼” D x 29 ½” H
  • Closed Dimensions:
    • 49 ¾” W x 22 ¼” D x 30 ¼” H
• Caddy Dimensions:
  • 13 ⅜” W x 16″ D x 13 ½ ” H
  • Drawer Dimensions (two drawers)
    • 11″ W x 11 ⅛” D x 2 ¾” H
• Door Bin Dimensions:
  • Large: 17″ W x 5 ¼” D x 5 ¼” H
  • Small: 17” W x 3 ⅛” D x 3 ⅛” H
• Aussie II is ideal for Sewing Machines:
  • Up to 55 pounds
  • Maximum Machine dimensions:
    • Width: 23 ¾”  (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire Aussie II features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in 5 separate boxes
• Aussie II weighs a total of 235 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

Expand your workspace with the incredible Wallaby Cabinet. This Cabinet has a three position airlift that holds most sewing machines comfortably and moves effortlessly up and down in a small footprint.

CABINET SPECIFICATIONS

• Closed Dimensions:
  • Closed: 42 ¾” W x 19″ D (front to back) x 30 ¼” H
  • Open: 70 ⅝” W x 59 ⅞” D x 29 ½” H
• Sewing Machines That Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Made from melamine laminate, MDF, and composite
• Additional Questions? Visit our FAQs page

• • Cubby Width: 13 ¼”
  • Cubby Depth: 14 ¾”
  • Cubby Height: 15 ½”

SEWING MACHINES THAT DO NOT FIT WALLABY II

• Baby Lock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Elna – 920 eXpressive
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.

SHIPPING INFORMATION

• Cabinet ships in four boxes
• Weighs a total of 170 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Adjustable wrench
• Optional:
  • Small drill bit (1/16 or ⅛) to help pre-drill holes
  • WD-40