AVA J EMBROIDERY CABINET

The Ava J Embroidery Cabinet is specially made for large and heavy industrial machines the perfect fit for your Juki, Janome and Elna. With three storage drawers, two cubbies and a pull-out thread space capable of holding 49 standard embroidery spools, everything will have a perfect place on this table insuring to keep you organized.

CABINET SPECIFICATIONS

• Ava B Opening:
  • 12 ½” W
• Ava J Opening:
  • 7 ½” W
• Dimensions:
  • 35 ½” W x 23 ½” D X 35″ H
• 2 Drawer Dimensions:
  • 26 ¾” W x 16″ D x 2″ H
• Single Drawer Dimensions:
  • 13″ W x 16 ¼” D x 5 ½” H
• 2 Cubby Dimensions:
  • 13″ W x 22 ¾” D x 7″ H
• Side Storage Shelf Dimensions:
  • 3 ¼” W x 21 ¾” D x 6″ H

SHIPPING INFORMATION

• The Ava ships ready to assemble in four boxes.
• Ava weighs a total of 199 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench

Allowing you to cut, sew and iron all in one spot, the Ginger cabinet offers five drawers and four cubbies to store your thread and accessories. On the far left, you will cut your fabric, in the middle you will sew your project and on the right you will iron with the built in ironing board.

CABINET SPECIFICATIONS

• Cabinet Dimensions:
  • Open: 61 ¼” W x 31 ½” D x 29 ½” H
  • Closed: 48 ½” W x 31 ½” D x 29 ½” H
• Drawer (x3) Dimensions:
  • 4 ⅜” W x 12” D x 3 ½” H
• Shelf (x4) Dimensions:
  • 11 ¾” W x 7 ½” D x 6 1⁄4 ” H
• Cutting Mat Dimensions:
  • 23” W x 17” D
• Ginger Cabinet is ideal for Sewing Machines:
  • Up to 45 pounds
  • Maximum Machine Dimensions:
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Sewing machine opening is beveled
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The Ginger features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT GINGER SEWING CABINET

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

• Storage includes:
  • Five drawers located on the front left
    • Top two hold thread pegs which hold 24 thread spools each (48 total)
    • Bottom three are single compartments for other storage
  • Four shelves located on the left side

SHIPPING INFORMATION

• The cabinet is shipped LTL, ready to assemble in three separate boxes
• Ginger weighs a total of 165 pounds
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

 This incredible sturdy table is there for you when you need it and can be easily put away when not in use, this table provides you with 49' of workspace and can be slimmed down to 14" when folded together.

TABLE SPECIFICATIONS

• Table Open:
  • 49” W x 37” D
  • Height Adjustable
• Table Closed:
  • 14” W x 37” D
  • Height Adjustable
• Shelf Space (x2):
  • 11 ½ ” W x 34 ½ ” D x 12 ½ ” H
• Cutting Mat C
  • 48” W x 36” D

ASSEMBLY MANUAL

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

• Kangaroo II Cabinet Dimensions
  • Open (quilt leaf out)
    • 55 ⅝” W x 40 ½” D x 29 ½ H
  • Closed
    • 55 ⅝” W x 21” D x 29 ½ H
• Joey II Dimensions
  • 25 ¾” W x 16 ½” D x 24″ H
  • Top two drawer dimensions:
    • 22 ½ ” W x 13″ D x 2 ½” H
  • Bottom drawer dimensions:
    • 22 ½ ” W x 13″ D x 8″ H
• Sewing Machines that Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23-3/4” (left to right)
    • Depth: 12-1/2” (front to back)
    • Height: 14-1/2”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Both products made from melamine laminate, MDF, and composite
• Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

• BabyLock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five boxes
• Kangaroo II weighs a total of 156 pounds
• Joey II weighs a total of 60 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Optional:
  • WD-40
  • Adjustable wrench

TABLE SPECIFICATIONS

• Table Dimensions:
  • Legs Unfolded: 40 ¼” W x 19 ¾” D x 28 ½” H
  • Legs Folded: 40 ¼” W x 19 ¾” D x 4 ½” H
• The Heavyweight Table has an adjustable platform so it will accommodate the Singer Featherweight™ 221K and 222K
• No need for custom insert, 221K and 222K fit perfectly
• Construction: Melamine/MDF with Steel Legs
• Manual Platform Weight Limit: 45 lbs

SHIPPING INFORMATION

• The Heavyweight Table arrives fully assembled in one box
• Shipped by FedEx or UPS
• Weighs a total of 37 pounds
• Cannot be shipped to a PO Box

The Emu sewing cabinet is the center island in your craft room. The Emu measures 36” tall and offers a spacious 24” x 12” opening with a three position airlift mechanism that moves your sewing machine or serger up and down into position with a push down.  The lift will support a 55 pound sewing machine. The sewing machine platform is height adjustable allowing you to adjust the height based on your sewing machine's measurements.

CABINET SPECIFICATIONS

• Cabinet dimensions:
  • Open: 71” W x 31 ⅜ ” D x 36 ⅛ ” H
  • Closed: 36 ½” W x 31 ⅜ ” D x 36” H
• Drawers (5 – storage side)
  • Small drawers (4 total): 11 ¾” W x 7 ⅜ ”  D x 3 ⅞ ” H
  • Larger drawer (1 total): 11 ⅞ ” W x 7 ⅜ ” D x 8 ⅛ ” H
• Adjustable shelves (3 – storage side): 17” W x 10 ⅜ ” D
• Adjustable shelves (5 – lift side): 4 ½ ” W x 9 ⅝” D
• Emu Cabinet is ideal for Sewing Machines:
  • Up to 55 pounds
  • Maximum Machine Dimensions:
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½ ” (front to back)
    • Height: 14”
    • Sewing machine opening is beveled
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The Emu features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT EMU SEWING CABINET

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1

• Janome – Horizon Memory Craft 15,000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

• Storage includes: 
  • Three adjustable shelves to the left of sewing well (lift side)
  • Five drawers located on the opposite side of the sewing well (storage side)
  • Five adjustable shelves on the opposite side of the sewing well (storage side)
• Adjustable three-position airlift:
  • Moves your machine into three positions: free arm, flatbed, and storage
  • Manual platform design with a 55-pound sewing machine capacity

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five separate boxes
• Emu weighs a total of 226 pounds
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench