Juki Travel Bag

The Juki Wheeled Trolley bag come in a size large and small with the ability to load your machine via the front or top load.

The large Juki trolley bag can accommodate large machines such as the Kirei HZL-NX7 and Sayaka DX-3000QVP. It features a gray Chenille fabric exterior with gray details and an embroidered JUKI logo. It also comes with a front pocket and two interior mesh wall pockets for easy storage.

Dimensions for Large trolley bag: 23" (W) x 16" (H) x 12.5" (D)

• What machines does the L trolley bag fit? NX7, DX-3000, DX4000, plus the  Juki DX, TL , HZL machines with LOTS of room on the sides for more fabric!!

The small Juki trolley bag can accommodate most sewing machines and sergers on the Juki product line. It features a gray Chenille fabric exterior with gray details and an embroidered JUKI QVP logo. It also comes with a front pocket and two interior mesh wall pockets for easy storage.

Dimensions for Small trolley bag: 10" (W) x 19" (L) x 16" (H)

• What machines does the small fit? (Juki DX, TL , HZL and more.)

Part Number: 14194-DS19

• Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.

This guide is used for setting the folded width of the fabric and the stitching position for coverstitching.

• This guide can set the folded width of the fabric and align the edge of the fabric from the back side, where it is difficult to see the coverstitching. First fold the fabric to the width that is to be sewn, and then adjust the guide according to the width of the fold. This guide is perfect for finishing pant and sleeve hems of clothes.

Series & Part Number

• MO-735: 40122229
• MCS-1500: 40177371
• MCS-1700QVP: 40177371

This presser foot is designed specifically for sewing chain stitches.

• Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)

Model & Part Number:

• MCS-1700QVP: 40177370

This presser foot is used for sewing together two pieces of fabric while creating gathers.

• Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 to 2.0
• Gathers can also be created in a single piece of fabric.

Series & Part Number

• MO-2800: 40138121
• MO-1000: 40138121
• MO-735: A9860-655-0A0C
• MO-114D/104D: A9860-655-0A0C
• MO-655: A9860-655-0A0C
• MO-654DE/MO-644: A9860-655-0A0C
• MO-623: A9860-655-0A0C
• MO-50e: 40131948
• MO-80CB: 40131948
• MO-1200QVP: A9860-655-0A0C
• MO-2000QVP: 40138121

This presser foot is used for sewing on strands of pearls, beads or sequins.

• Braiding to a width of up to 4 mm as well as transparent or decorative threads can be sewn on. The strand can also be sewn in the middle of fabric by sewing along a folded edge with flatlock.

Series & Part Number

• MO-2800: 40138106
• MO-1000: 40138106
• MO-735: A9870-634-0A0A
• MO-114D/104D: A9870-634-0A0A
• MO-655: A9870-634-0A0A
• MO654DE/MO-644: A9870-634-0A0A
• MO-623: A9870-634-0A0A
• MO-50e: 40131949
• MO-80CB: 40131949
• MO-1200QVP: A9870-634-0A0A
• MO-2000QVP: 40138106