Quilt Presser Foot for Computerized Machines

• With the feed dogs lowered, you can freely move the fabric to draw the stitching.
• Use the screw to adjust the height of the presser foot according to the thickness of the fabric, so the fabric moves smoothly.

• Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.

This presser foot is designed specifically for sewing chain stitches.

• Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)

Model & Part Number:

• MCS-1700QVP: 40177370

This presser foot is used for sewing on nylon thread or wire for crafts.

• Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.

Series & Part Number

• MO-2800: 40138099
• MO-1000: 40138099
• MO-735: A9820-655-0A0A
• MO-114D/104D: A9820-655-0A0A
• MO-655: A9820-655-0A0A
• MO654DE/MO-644: A9820-655-0A0A
• MO-623: A9820-655-0A0A
• MO-1200QVP: A9820-655-0A0A
• MO-2000QVP: 40138099

This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.

• The guide, being long at the front and back, makes this gauge perfect for sewing long straight lines

• The gauge can be moved as far as 3/4" (20 mm) from the needle and secured by loosening and tightening the screws with a screwdriver

Compatible with Juki TL machines and J-150 QVP. Such as:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: A9846D250A0