This set consist of a left zipper foot with teeth and an inner foot to make the complete set. The teeth of the zipper would be on the RIGHT SIDE. It is used for cottons when you want to grip the fabric with the teeth on the bottom.
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This table is only for the Juki TL's such as:
This presser foot is used for sewing on nylon thread or wire for crafts.
Content
This set consist of a left zipper foot with teeth and an inner foot to make the complete set. The teeth of the zipper would be on the RIGHT SIDE. It is used for cottons when you want to grip the fabric with the teeth on the bottom.
This guide is used for setting the folded width of the fabric and the stitching position for coverstitching.
This guide can set the folded width of the fabric and align the edge of the fabric from the back side, where it is difficult to see the coverstitching. First fold the fabric to the width that is to be sewn, and then adjust the guide according to the width of the fold. This guide is perfect for finishing pant and sleeve hems of clothes.
Series & Part Number
MO-735: 40122229
MCS-1500: 40177371
MCS-1700QVP: 40177371
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.
Series & Part Number
MO-2800: 40138103
MO-1000: 40138103
MO-735: A9865-655-0A0A
MO-114D/104D: A9865-655-0A0A
MO-655: A9865-655-0A0A
MO654DE/MO-644: A9865-655-0A0A
MO-623: A9865-655-0A0A
MO-50e: 40131950
MO-80CB: 40131950
MO-1200QVP: A9865-655-0A0A
MO-2000QVP: 40138103
This 1/4" Quilting Presser Foot is used for free-motion quilting using a ruler.
With a distance of 1/4" (6.5mm) from the 1/4" needle entry point to the outer edge of the presser foot, sew using a ruler as a guide. The front of the presser foot is lowered, making it easier to see the needle area.
Use the screw to adjust the height of the presser foot according to the thickness of the fabric.
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This presser foot is used for sewing on nylon thread or wire for crafts.
Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.