This set consist of a left zipper foot with teeth and an inner foot to make the complete set. The teeth of the zipper would be on the RIGHT SIDE. It is used for cottons when you want to grip the fabric with the teeth on the bottom.
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
This Thin Fabric presser foot is designed specifically for sewing lightweight materials easily. It reduces puckering and prevents skipped stitches as well as faulty stitching. Pair the thin throat plate for best results.
Compatible with all Juki TL models. Such as:
PLEASE NOTE THE MO-654DE/623/644D/655 WASTE BASKET LOOKS DIFFERENT. SELECT MACHINE MODEL TO SEE PICTURE
*Waste Baskets are FINAL SALE and NOT RETURNABLE.
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Content
This set consist of a left zipper foot with teeth and an inner foot to make the complete set. The teeth of the zipper would be on the RIGHT SIDE. It is used for cottons when you want to grip the fabric with the teeth on the bottom.
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.
Series & Part Number
MO-2800: 40138103
MO-1000: 40138103
MO-735: A9865-655-0A0A
MO-114D/104D: A9865-655-0A0A
MO-655: A9865-655-0A0A
MO654DE/MO-644: A9865-655-0A0A
MO-623: A9865-655-0A0A
MO-50e: 40131950
MO-80CB: 40131950
MO-1200QVP: A9865-655-0A0A
MO-2000QVP: 40138103
This Thin Fabric presser foot is designed specifically for sewing lightweight materials easily.
Since the needle drops into a round opening, this presser foot reduces puckering when sewing lightweight materials, preventing skipped stitches as well as faulty stitching.
This presser foot is used for sewing on nylon thread or wire for crafts.
Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.
Series & Part Number
MO-2800: 40138099
MO-1000: 40138099
MO-735: A9820-655-0A0A
MO-114D/104D: A9820-655-0A0A
MO-655: A9820-655-0A0A
MO654DE/MO-644: A9820-655-0A0A
MO-623: A9820-655-0A0A
MO-1200QVP: A9820-655-0A0A
MO-2000QVP: 40138099
This box collects scraps of fabric cut by the overlock sewing machine.
This is useful for throwing out all scraps after work is completed, without allowing them to scatter around the work area. When storing the sewing machine, accessories such as the foot controller can be stored in the box.
Series & Part Number
MO-1000/2000: 40134096
MO-735: A9108-130-000
MO-114D/104D: A910-880-L000
MO-655: A9108-202-000
MO-654DE: A9108-202-000
MO-644D: A9108-202-000
MO-623: A9108-202-000
MO-1200QVP: A910-880-L000
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves