Zipper pressure feet are a zipper's best friend. But zipper feet are also great for seeing how close you are to the edge since there is only one toe!
This presser foot is used to sew blind hem stitching, decorative flatlock or pintucks.
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This table is only for the Juki TL's such as:
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
Content
This presser foot is used to sew blind hem stitching, decorative flatlock or pin-tucks.
This presser foot can be used with either the right or the left needle and has a guide plate that can be moved within a wide range.
Since the seam width can be adjusted, this presser foot is also useful for decorating by sewing along a folded edge with decorative flatlock or with roll hem (pin-tuck) stitches.
Series & Part Number
MO-2800: 40149058
MO-1000: 40149058
MO-735: A9521-634-0A0A
MO-114D/104D: A9521-634-0A0A
MO-655: A9521-634-0A0A
MO654DE/MO-644: A9521-634-0A0A
MO-623: A9521-634-0A0A
MO-50e: 40131946
MO-80CB: 40131946
MO-1200QVP: A9521-634-0A0A
MO-2000QVP: 40149058
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This presser foot is used for sewing on nylon thread or wire for crafts.
Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.
Series & Part Number
MO-2800: 40138099
MO-1000: 40138099
MO-735: A9820-655-0A0A
MO-114D/104D: A9820-655-0A0A
MO-655: A9820-655-0A0A
MO654DE/MO-644: A9820-655-0A0A
MO-623: A9820-655-0A0A
MO-1200QVP: A9820-655-0A0A
MO-2000QVP: 40138099
This 1/4" Quilting Presser Foot is used for free-motion quilting using a ruler.
With a distance of 1/4" (6.5mm) from the 1/4" needle entry point to the outer edge of the presser foot, sew using a ruler as a guide. The front of the presser foot is lowered, making it easier to see the needle area.
Use the screw to adjust the height of the presser foot according to the thickness of the fabric.
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.