This presser foot is used for free-motion sewing of cording.
This presser foot has a hole for supplying cording to be sewn over. With the feed dogs lowered, you can freely move the fabric to create simple embroidery with cording.
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.
Compatible with Juki TL machines and J-150 QVP. Such as:
Two-thread overlocking or flatlock can be sewn with a 3/4-thread overlock sewing machine.
Content
This presser foot is used for free-motion sewing of cording.
This presser foot has a hole for supplying cording to be sewn over. With the feed dogs lowered, you can freely move the fabric to create simple embroidery with cording.
This presser foot is used for sewing on strands of pearls, beads or sequins.
Braiding to a width of up to 4 mm as well as transparent or decorative threads can be sewn on. The strand can also be sewn in the middle of fabric by sewing along a folded edge with flatlock.
Series & Part Number
MO-2800: 40138106
MO-1000: 40138106
MO-735: A9870-634-0A0A
MO-114D/104D: A9870-634-0A0A
MO-655: A9870-634-0A0A
MO654DE/MO-644: A9870-634-0A0A
MO-623: A9870-634-0A0A
MO-50e: 40131949
MO-80CB: 40131949
MO-1200QVP: A9870-634-0A0A
MO-2000QVP: 40138106
This guide is used for sewing parallel rows of stitching that are equally spaced.
This guide, installed on either side of the needle, can be used for stitching on either the left or the right side.
With marks on the guide bar at a 1/5" (5 mm) spacing, this guide can be moved as far as 2.32" (60 mm) to the left or right side of the needle.
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.
Part Number: 40138095 and A98156550A0
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.
The guide, being long at the front and back, makes this gauge perfect for sewing long straight lines
The gauge can be moved as far as 3/4" (20 mm) from the needle and secured by loosening and tightening the screws with a screwdriver
Compatible with Juki TL machines and J-150 QVP. Such as:
Two-thread overlocking or flatlock can be sewn with a 3/4-thread overlock sewing machine.
By covering the upper looper, you can sew with only two threads (lower looper thread and needle thread). Although two pieces of fabric cannot be sewn together, you can easily sew overlocking with two threads.