Tri-Flow® Superior Lubricant is a superior, light viscosity lube that allows for deep penetration into hard to reach moving parts. Use it to refill the oiling pen or on it’s own.
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
Content
Tri-Flow® Superior Lubricant is a superior, light viscosity lube that allows for deep penetration into hard to reach moving parts. Use it to refill the oiling pen or on it's own.
This standard presser foot is used for sewing straight stitches and zigzag stitches. It can be used to sew lightweight to heavyweight materials.
The wide needle entry opening allows this presser foot to be used for a variety of fabrics and applications, from straight stitches to zigzag stitches.
Press the black button to keep the presser for horizontal in order to smoothly begin sewing at a thick seam.
This listing is for computerized machines only.
This guide is used for sewing parallel rows of stitching that are equally spaced.
This guide, installed on either side of the needle, can be used for stitching on either the left or the right side.
With marks on the guide bar at a 1/5" (5 mm) spacing, this guide can be moved as far as 2.32" (60 mm) to the left or right side of the needle.
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.
Series & Part Number
MO-2800: 40138103
MO-1000: 40138103
MO-735: A9865-655-0A0A
MO-114D/104D: A9865-655-0A0A
MO-655: A9865-655-0A0A
MO654DE/MO-644: A9865-655-0A0A
MO-623: A9865-655-0A0A
MO-50e: 40131950
MO-80CB: 40131950
MO-1200QVP: A9865-655-0A0A
MO-2000QVP: 40138103
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves
Series & Part Number
MO-2800: 40149059
MO-1000: 40149059
MO-735: A9511-634-0A0A
MO-114D/104D: A9511-634-0A0A
MO-655: A9511-634-0A0A
MO654DE/MO-644: A9511-634-0A0A
MO-623: A9511-634-0A0A
MO-1200QVP: A9511-634-0A0A
MO-2000QVP: 40149059
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.