This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This table is only for the Juki TL's such as:
This 1/4" Quilting Presser Foot is used for free-motion quilting using a ruler.
With a distance of 1/4" (6.5mm) from the 1/4" needle entry point to the outer edge of the presser foot, sew using a ruler as a guide. The front of the presser foot is lowered, making it easier to see the needle area.
Use the screw to adjust the height of the presser foot according to the thickness of the fabric.
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This presser foot is used for sewing on nylon thread or wire for crafts.
Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.
Series & Part Number
MO-2800: 40138099
MO-1000: 40138099
MO-735: A9820-655-0A0A
MO-114D/104D: A9820-655-0A0A
MO-655: A9820-655-0A0A
MO654DE/MO-644: A9820-655-0A0A
MO-623: A9820-655-0A0A
MO-1200QVP: A9820-655-0A0A
MO-2000QVP: 40138099
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves