Embroider beautiful designs on socks and wristbands with this frame.
Dimensions: 50mm x 30mm (2" x 1.2")
The large needle hole makes this throat plate ideal for sewing heavyweight materials. This plate is designed for sewing with thicker weight fabric as well as a heavy amount of fabric to prevent your needle from tugging resulting in damaging your regular stitch plate.
This is compatible with:
The large needle hole makes this throat plate ideal for sewing heavy-weight materials.
This plate is designed for sewing with thicker weight fabric as well as a heavy amount of fabric to prevent your needle from tugging, resulting in damaging your regular stitch plate.
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.
Series & Part Number
MO-2800: 40138103
MO-1000: 40138103
MO-735: A9865-655-0A0A
MO-114D/104D: A9865-655-0A0A
MO-655: A9865-655-0A0A
MO654DE/MO-644: A9865-655-0A0A
MO-623: A9865-655-0A0A
MO-50e: 40131950
MO-80CB: 40131950
MO-1200QVP: A9865-655-0A0A
MO-2000QVP: 40138103
This presser foot is designed specifically for sewing chain stitches.
Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)
Model & Part Number:
MCS-1700QVP: 40177370
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves
Series & Part Number
MO-2800: 40149059
MO-1000: 40149059
MO-735: A9511-634-0A0A
MO-114D/104D: A9511-634-0A0A
MO-655: A9511-634-0A0A
MO654DE/MO-644: A9511-634-0A0A
MO-623: A9511-634-0A0A
MO-1200QVP: A9511-634-0A0A
MO-2000QVP: 40149059
This presser foot is used to sew blind hem stitching, decorative flatlock or pin-tucks.
This presser foot can be used with either the right or the left needle and has a guide plate that can be moved within a wide range.
Since the seam width can be adjusted, this presser foot is also useful for decorating by sewing along a folded edge with decorative flatlock or with roll hem (pin-tuck) stitches.