Pintuck Foot Wide

The Pintuck Foot (Wide) is used for sewing wide pintucks on blouses and handkerchiefs using two needles.

When sewing pintucks in parallel, the 7 slits on the bottom of the presser foot can be used as a guide. Pintucks are suited to light-weight soft materials. Pintucks are stable shape can be produced while putting a cord in each pintuck.

Series & Part Number

• HZL-DX Series: 40206248

• Exceed(F) Series: 40206248

• HZL-H Series: 40206248

• HZL-NX Series: 40206248

• HZL-350Z: 40206248

• Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.

This box collects scraps of fabric cut by the overlock sewing machine.

• This is useful for throwing out all scraps after work is completed, without allowing them to scatter around the work area. When storing the sewing machine, accessories such as the foot controller can be stored in the box.

Series & Part Number

• MO-1000/2000: 40134096

• MO-735: A9108-130-000

• MO-114D/104D: A910-880-L000

• MO-655: A9108-202-000

• MO-654DE: A9108-202-000

• MO-644D: A9108-202-000

• MO-623: A9108-202-000

• MO-1200QVP: A910-880-L000

This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.

This table will fit with the following:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. The gauge can be swung toward you so that it is out of the way when not in use.

• The guide, being short at the front and back, makes this gauge perfect for sewing gentle curves

• The gauge can be moved as far as 1.2" (30 mm) from the needle and secured by loosening and tightening the screws with a screwdriver.

Compatible with Juki TL machines and J-150 QVP. Such as:

• • Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: A9847D250A0

Sewists use this seam guide with their gauge to get an accurate seam allowance!

This presser foot is designed specifically for sewing chain stitches.

• Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)

Model & Part Number:

• MCS-1700QVP: 40177370