Overcasting Presser Foot

• Sew with the edges of the fabric aligned with the guide. The prong in the opening of the presser foot presses down the edge of the fabric to prevent puckering. In addition, the amount of thread going into the stitching is adjusted by the thread crossing the prong, creating a clean finish with little shrinkage.
• This presser foot cannot be used to sew zigzag stitches or overcasting by 3-point zigzag

• Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves

• MO-2800: 40149059
• MO-1000: 40149059
• MO-735: A9511-634-0A0A
• MO-114D/104D: A9511-634-0A0A
• MO-655: A9511-634-0A0A
• MO654DE/MO-644: A9511-634-0A0A
• MO-623: A9511-634-0A0A
• MO-1200QVP: A9511-634-0A0A
• MO-2000QVP: 40149059

This presser foot is designed specifically for sewing chain stitches.

• Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)

Model & Part Number:

• MCS-1700QVP: 40177370

This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.

This table will fit with the following:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

This guide is used for sewing parallel rows of stitching that are equally spaced.

• This guide, installed on either side of the needle, can be used for stitching on either the left or the right side.

• With marks on the guide bar at a 1/5" (5 mm) spacing, this guide can be moved as far as 2.32" (60 mm) to the left or right side of the needle.

• Juki TL models include Juki TL 2010, Juki TL15, Juki TL2010Q, Juki TL2200, Juki TL2000Q, Juki TL 2000QI, Juki TL98, Juki TL18 Haruka, Juki TL2020PE, Juki 2200QVP Mini sewing machines.

Part Number: 40171424

This presser foot is used for sewing together two pieces of fabric while creating gathers.

• Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 to 2.0
• Gathers can also be created in a single piece of fabric.

Series & Part Number

• MO-2800: 40138121
• MO-1000: 40138121
• MO-735: A9860-655-0A0C
• MO-114D/104D: A9860-655-0A0C
• MO-655: A9860-655-0A0C
• MO-654DE/MO-644: A9860-655-0A0C
• MO-623: A9860-655-0A0C
• MO-50e: 40131948
• MO-80CB: 40131948
• MO-1200QVP: A9860-655-0A0C
• MO-2000QVP: 40138121