Open Toe Presser Foot

• The wide opening at the front of this presser foot makes appliques and designs easy to see, which is useful for curvy decorative stitching.
• The groove along the bottom of this presser foot ensures that the presser foot does not catch on the stitching, so the fabric will be smoothly fed.

This presser foot is designed specifically for sewing chain stitches.

• Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)

Model & Part Number:

• MCS-1700QVP: 40177370

This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.

This table will fit with the following:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

• Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves

• MO-2800: 40149059
• MO-1000: 40149059
• MO-735: A9511-634-0A0A
• MO-114D/104D: A9511-634-0A0A
• MO-655: A9511-634-0A0A
• MO654DE/MO-644: A9511-634-0A0A
• MO-623: A9511-634-0A0A
• MO-1200QVP: A9511-634-0A0A
• MO-2000QVP: 40149059

This presser foot is used for sewing together two pieces of fabric while creating gathers.

• Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 to 2.0
• Gathers can also be created in a single piece of fabric.

Series & Part Number

• MO-2800: 40138121
• MO-1000: 40138121
• MO-735: A9860-655-0A0C
• MO-114D/104D: A9860-655-0A0C
• MO-655: A9860-655-0A0C
• MO-654DE/MO-644: A9860-655-0A0C
• MO-623: A9860-655-0A0C
• MO-50e: 40131948
• MO-80CB: 40131948
• MO-1200QVP: A9860-655-0A0C
• MO-2000QVP: 40138121

This 1/4" Quilting Presser Foot is used for free-motion quilting using a ruler.

• With a distance of 1/4" (6.5mm) from the 1/4" needle entry point to the outer edge of the presser foot, sew using a ruler as a guide. The front of the presser foot is lowered, making it easier to see the needle area.

• Use the screw to adjust the height of the presser foot according to the thickness of the fabric.

THIS IS FOR JUKI TL MODELS ONLY. Compatible with:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: 40166729