LED Laser Pointer Set

The LED Laser Pointer Set allows you to see the start of your sewing position without even needing to lower the needle. This is perfect for aligning rows of patterns for sewing. For optimal use, pair the LED Laser Pointer set with the mounting base (Part no. 40247204).

Compatible with the Juki DX-4000QVP

• This set contains the following: Edge sewing presser foot, quilt presser foot (open type), quilt presser foot (zigzag type), open toe presser foot, applique presser foot, and pearl attaching presser foot.
• Juki computerized models and travel machines including: Juki HZL F600, Juki HZL F400, Juki HZL F300, Juki DX5, Juki DX7, Juki DX 1500 QVP, Juki DX2000 QVP, Juki DX3000 QVP, Juki DX4000 QVP Kokochi, Juki HZL G220, Juki HZL G120 sewing machines

• Use the screw to adjust the height of the presser foot according to the thickness of the fabric, so the fabric moves smoothly.

• After tape with a width of about 0.75" to 1.0" (22 to 25mm) is passed through the guide, this presser foot creates double-fold tape with a width of about 0.2" (5 mm) and sews it to bind the fabric.
• Single-fold tape with a width of about 0.4" to 0.5" (10 to 13 mm) can also be used. You can move the guide to the left or the right to adjust the needle entry point.

• Controlling the sewing machine with your foot leaves both of your hands free while sewing. You can trim threads and or do another operation by pressing on the heel of the foot controller.

• Using your knee to push the lever to the right raises the presser foot, and when you return it will lower the presser foot.