This presser foot is used for sewing together two pieces of fabric while creating gathers.
Original Juki foot for model MO-1000 and MO-2000QVP sergers.
Used for regular overlock stitching and overlocking the edge of fabric to swing in tape.
This controller can be used to start/stop sewing and adjust the sewing speed with your foot.
This Thin Fabric plate is designed specifically for sewing lightweight materials easily. It reduces puckering and prevents skipped stitches as well as faulty stitching.
Compatible with all Juki TL models. Such as:
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Content
Use this oil for the JUKI J150QVP and Juki 1541
This presser foot is used for sewing together two pieces of fabric while creating gathers.
Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 to 2.0
Gathers can also be created in a single piece of fabric.
Series & Part Number
MO-2800: 40138121
MO-1000: 40138121
MO-735: A9860-655-0A0C
MO-114D/104D: A9860-655-0A0C
MO-655: A9860-655-0A0C
MO-654DE/MO-644: A9860-655-0A0C
MO-623: A9860-655-0A0C
MO-50e: 40131948
MO-80CB: 40131948
MO-1200QVP: A9860-655-0A0C
MO-2000QVP: 40138121
This controller can be used to start/stop sewing and adjust the sewing speed with your foot.
Controlling the sewing machine with your foot leaves both of you hands free while sewing
Part Number: 4016219
This Thin Fabric plate is designed specifically for sewing lightweight materials easily. It reduces puckering and prevents skipped stitches as well as faulty stitching.
This throat plate prevents stitching shrinkage and keeps lightweight materials out of the needle hole. Recommended Needle size #9 to #11
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves