This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This table is only for the Juki TL's such as:
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.
Part Number: 40138095 and A98156550A0
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This presser foot is designed specifically for sewing chain stitches.
Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)
Model & Part Number:
MCS-1700QVP: 40177370
This presser foot is used for sewing on piping while overlocking the edge of the fabric.
Sew along the edge of the piping with the tubular part of the tape fed into the groove along the bottom of this presser foot. Use either both needles or only the left needle with this presser foot.
Series & Part Number
MO-2800: 40138103
MO-1000: 40138103
MO-735: A9865-655-0A0A
MO-114D/104D: A9865-655-0A0A
MO-655: A9865-655-0A0A
MO654DE/MO-644: A9865-655-0A0A
MO-623: A9865-655-0A0A
MO-50e: 40131950
MO-80CB: 40131950
MO-1200QVP: A9865-655-0A0A
MO-2000QVP: 40138103
This guide is used for sewing parallel rows of stitching that are equally spaced.
This guide, installed on either side of the needle, can be used for stitching on either the left or the right side.
With marks on the guide bar at a 1/5" (5 mm) spacing, this guide can be moved as far as 2.32" (60 mm) to the left or right side of the needle.