This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance.
Compatible with Juki TL machines and J-150 QVP. Such as:
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Content
This box collects scraps of fabric cut by the overlock sewing machine.
This is useful for throwing out all scraps after work is completed, without allowing them to scatter around the work area. When storing the sewing machine, accessories such as the foot controller can be stored in the box.
Series & Part Number
MO-1000/2000: 40134096
MO-735: A9108-130-000
MO-114D/104D: A910-880-L000
MO-655: A9108-202-000
MO-654DE: A9108-202-000
MO-644D: A9108-202-000
MO-623: A9108-202-000
MO-1200QVP: A910-880-L000
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.
Part Number: 40138095 and A98156550A0
This guide is used for sewing parallel rows of stitching that are equally spaced.
This guide, installed on either side of the needle, can be used for stitching on either the left or the right side.
With marks on the guide bar at a 1/5" (5 mm) spacing, this guide can be moved as far as 2.32" (60 mm) to the left or right side of the needle.
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves