Use this foot to apply piping to your projects with a professional look.
Guaranteed to fit Juki Sewing Machine Models:
DDL-8700, TL2020, TL98E, TL-98P, TL98Q, TL98QE, TL-2000Qi, TL-2010Q
This presser foot is used for sewing on nylon thread or wire for crafts.
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
This presser foot is designed specifically for sewing chain stitches.
This presser foot is used to sew blind hem stitching, decorative flatlock or pintucks.
This guide is used for setting the folded width of the fabric and the stitching postiton for coverstitching.
Content
Use this foot to apply piping to your projects with a professional look.
Guaranteed to fit Juki Sewing Machine Models:
DDL-8700, TL2020, TL98E, TL-98P, TL98Q, TL98QE, TL-2000Qi, TL-2010Q
This presser foot is used for sewing on nylon thread or wire for crafts.
Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.
Series & Part Number
MO-2800: 40138099
MO-1000: 40138099
MO-735: A9820-655-0A0A
MO-114D/104D: A9820-655-0A0A
MO-655: A9820-655-0A0A
MO654DE/MO-644: A9820-655-0A0A
MO-623: A9820-655-0A0A
MO-1200QVP: A9820-655-0A0A
MO-2000QVP: 40138099
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves
Series & Part Number
MO-2800: 40149059
MO-1000: 40149059
MO-735: A9511-634-0A0A
MO-114D/104D: A9511-634-0A0A
MO-655: A9511-634-0A0A
MO654DE/MO-644: A9511-634-0A0A
MO-623: A9511-634-0A0A
MO-1200QVP: A9511-634-0A0A
MO-2000QVP: 40149059
This presser foot is designed specifically for sewing chain stitches.
Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)
Model & Part Number:
MCS-1700QVP: 40177370
This presser foot is used to sew blind hem stitching, decorative flatlock or pin-tucks.
This presser foot can be used with either the right or the left needle and has a guide plate that can be moved within a wide range.
Since the seam width can be adjusted, this presser foot is also useful for decorating by sewing along a folded edge with decorative flatlock or with roll hem (pin-tuck) stitches.
Series & Part Number
MO-2800: 40149058
MO-1000: 40149058
MO-735: A9521-634-0A0A
MO-114D/104D: A9521-634-0A0A
MO-655: A9521-634-0A0A
MO654DE/MO-644: A9521-634-0A0A
MO-623: A9521-634-0A0A
MO-50e: 40131946
MO-80CB: 40131946
MO-1200QVP: A9521-634-0A0A
MO-2000QVP: 40149058
This guide is used for setting the folded width of the fabric and the stitching position for coverstitching.
This guide can set the folded width of the fabric and align the edge of the fabric from the back side, where it is difficult to see the coverstitching. First fold the fabric to the width that is to be sewn, and then adjust the guide according to the width of the fold. This guide is perfect for finishing pant and sleeve hems of clothes.