Hinged Cording Foot for Juki TL & J-150 QVP Machines

This one-sided presser foot, presses down on only one side of the fabric and is useful for sewing along edges of zippers and piping. It also allows thick seams to easily be crossed.

• Since the needle drops on the right side, this presser foot is useful for perfect alignment in a wide range of applications, such as concealed seams along edges of zipper and piping. This hinged presser foot can easily cross thick seams.

Compatible with Juki TL machines and J-150 QVP. Such as :

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: A9844D25CA0

This presser foot is used for sewing together two pieces of fabric while creating gathers.

• Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 to 2.0
• Gathers can also be created in a single piece of fabric.

Series & Part Number

• MO-2800: 40138121
• MO-1000: 40138121
• MO-735: A9860-655-0A0C
• MO-114D/104D: A9860-655-0A0C
• MO-655: A9860-655-0A0C
• MO-654DE/MO-644: A9860-655-0A0C
• MO-623: A9860-655-0A0C
• MO-50e: 40131948
• MO-80CB: 40131948
• MO-1200QVP: A9860-655-0A0C
• MO-2000QVP: 40138121

This box collects scraps of fabric cut by the overlock sewing machine.

• This is useful for throwing out all scraps after work is completed, without allowing them to scatter around the work area. When storing the sewing machine, accessories such as the foot controller can be stored in the box.

Series & Part Number

• MO-1000/2000: 40134096

• MO-735: A9108-130-000

• MO-114D/104D: A910-880-L000

• MO-655: A9108-202-000

• MO-654DE: A9108-202-000

• MO-644D: A9108-202-000

• MO-623: A9108-202-000

• MO-1200QVP: A910-880-L000

• By covering the upper looper, you can sew with only two threads (lower looper thread and needle thread). Although two pieces of fabric cannot be sewn together, you can easily sew overlocking with two threads.

This basic presser foot is easy to use in various sewing applications, such as straight lines or curves on medium to heavyweight materials. This foot is your standard foot that comes with your machine, already installed out the box. And actually gives you a SCANT 1/4". Making it just shy of a true 1/4".

This part is compatible with all Juki TL mechanical machines. Such as:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

• Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves

• MO-2800: 40149059
• MO-1000: 40149059
• MO-735: A9511-634-0A0A
• MO-114D/104D: A9511-634-0A0A
• MO-655: A9511-634-0A0A
• MO654DE/MO-644: A9511-634-0A0A
• MO-623: A9511-634-0A0A
• MO-1200QVP: A9511-634-0A0A
• MO-2000QVP: 40149059