Echo Quilting Foot for Juki TL & J-150 QVP Machines

This presser foot for free-motion sewing has guidelines useful for echo quilting.

• The circular guidelines at 1/4" (6.5mm) and 5/8" (10mm) from the needle entry point are useful for echo quilting, stitching sewn equally spaced.

• Use the screw to adjust the height of the presser foot according to the thickness of the fabric.

Compatible with Juki TL machines and J-150 QVP. Such as:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: 40166739

This presser foot is used for sewing on nylon thread or wire for crafts.

• Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.

Series & Part Number

• MO-2800: 40138099
• MO-1000: 40138099
• MO-735: A9820-655-0A0A
• MO-114D/104D: A9820-655-0A0A
• MO-655: A9820-655-0A0A
• MO654DE/MO-644: A9820-655-0A0A
• MO-623: A9820-655-0A0A
• MO-1200QVP: A9820-655-0A0A
• MO-2000QVP: 40138099

This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.

This table will fit with the following:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

• Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves

• MO-2800: 40149059
• MO-1000: 40149059
• MO-735: A9511-634-0A0A
• MO-114D/104D: A9511-634-0A0A
• MO-655: A9511-634-0A0A
• MO654DE/MO-644: A9511-634-0A0A
• MO-623: A9511-634-0A0A
• MO-1200QVP: A9511-634-0A0A
• MO-2000QVP: 40149059

• Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.