This presser foot is designed specifically for sewing chain stitches.
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. This gauge can be swung toward you so that it is out of the way when not in use.
Compatible with Juki TL machines and J-150 QVP. Such as:
This presser foot is used for sewing on strands of pearls, beads or sequins.
Content
Use this foot to apply piping or welt cording. Can be used with welt cord or piping that is already covered or cover it yourself.
This presser foot is designed specifically for sewing chain stitches.
Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)
Model & Part Number:
MCS-1700QVP: 40177370
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. The gauge can be swung toward you so that it is out of the way when not in use.
The guide, being short at the front and back, makes this gauge perfect for sewing gentle curves
The gauge can be moved as far as 1.2" (30 mm) from the needle and secured by loosening and tightening the screws with a screwdriver.
Compatible with Juki TL machines and J-150 QVP. Such as:
This 1/4" Quilting Presser Foot is used for free-motion quilting using a ruler.
With a distance of 1/4" (6.5mm) from the 1/4" needle entry point to the outer edge of the presser foot, sew using a ruler as a guide. The front of the presser foot is lowered, making it easier to see the needle area.
Use the screw to adjust the height of the presser foot according to the thickness of the fabric.
This presser foot is used for sewing on strands of pearls, beads or sequins.
Braiding to a width of up to 4 mm as well as transparent or decorative threads can be sewn on. The strand can also be sewn in the middle of fabric by sewing along a folded edge with flatlock.