This presser foot is used for free-motion sewing of cording.
This presser foot has a hole for supplying cording to be sewn over. With the feed dogs lowered, you can freely move the fabric to create simple embroidery with cording.
This presser foot is used for free-motion sewing of cording.
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. This gauge can be swung toward you so that it is out of the way when not in use.
Compatible with Juki TL machines and J-150 QVP. Such as:
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This table is only for the Juki TL's such as:
This controller can be used to start/stop sewing and adjust the sewing speed with your foot.
This presser foot is used for sewing on nylon thread or wire for crafts.
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
Content
This presser foot is used for free-motion sewing of cording.
This presser foot has a hole for supplying cording to be sewn over. With the feed dogs lowered, you can freely move the fabric to create simple embroidery with cording.
This gauge is used as a guide for the edge of the fabric when sewing with a fixed seam allowance. The gauge can be swung toward you so that it is out of the way when not in use.
The guide, being short at the front and back, makes this gauge perfect for sewing gentle curves
The gauge can be moved as far as 1.2" (30 mm) from the needle and secured by loosening and tightening the screws with a screwdriver.
Compatible with Juki TL machines and J-150 QVP. Such as:
This table is a standard accessory that comes with all Juki TL models. If you have misplaced yours or broken it, you can get the replacement here! This is great to hold up the weight of your projects, and add room to your workspace.
This controller can be used to start/stop sewing and adjust the sewing speed with your foot.
Controlling the sewing machine with your foot leaves both of you hands free while sewing
Part Number: 4016219
This presser foot is used for sewing on nylon thread or wire for crafts.
Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills, and prevent them from collapsing.
Series & Part Number
MO-2800: 40138099
MO-1000: 40138099
MO-735: A9820-655-0A0A
MO-114D/104D: A9820-655-0A0A
MO-655: A9820-655-0A0A
MO654DE/MO-644: A9820-655-0A0A
MO-623: A9820-655-0A0A
MO-1200QVP: A9820-655-0A0A
MO-2000QVP: 40138099
This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.
Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.