This presser foot is designed specifically for sewing chain stitches.
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Original Juki foot for model MO-1000 and MO-2000QVP sergers.
Used for regular overlock stitching and overlocking the edge of fabric to swing in tape.
Content
This controller can be used to start/stop sewing and adjust the sewing speed with your foot. *40119192 for Korean version
This guide is used for setting the folded width of the fabric and the stitching position for coverstitching.
This guide can set the folded width of the fabric and align the edge of the fabric from the back side, where it is difficult to see the coverstitching. First fold the fabric to the width that is to be sewn, and then adjust the guide according to the width of the fold. This guide is perfect for finishing pant and sleeve hems of clothes.
Series & Part Number
MO-735: 40122229
MCS-1500: 40177371
MCS-1700QVP: 40177371
This table is used for free-motion sewing when the sewing machine is positioned longitudinally.
This auxiliary table for free-motion quilting ( FMQ ) is transparent, making it easy to see under the work surface.
It is also perfect for use with the quilting foot side open toe.
This presser foot is designed specifically for sewing chain stitches.
Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)
Model & Part Number:
MCS-1700QVP: 40177370
This presser foot is used for sewing on strands of pearls, beads or sequins along curves.
Braiding of a width of up to 4 mm can be sewn onto an outside curve (towards the left) with a diameter of at least 15 cm. This presser foot being short at the front allows it to easily follow curves