WALLABY CABINET WHITE

Expand your workspace with the incredible Wallaby Cabinet. This Cabinet has a three position airlift that holds most sewing machines comfortably and moves effortlessly up and down in a small footprint.

CABINET SPECIFICATIONS

• Closed Dimensions:
  • Closed: 42 ¾” W x 19″ D (front to back) x 30 ¼” H
  • Open: 70 ⅝” W x 59 ⅞” D x 29 ½” H
• Sewing Machines That Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Made from melamine laminate, MDF, and composite
• Additional Questions? Visit our FAQs page

• • Cubby Width: 13 ¼”
  • Cubby Depth: 14 ¾”
  • Cubby Height: 15 ½”

SEWING MACHINES THAT DO NOT FIT WALLABY II

• Baby Lock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Elna – 920 eXpressive
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.

SHIPPING INFORMATION

• Cabinet ships in four boxes
• Weighs a total of 170 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Adjustable wrench
• Optional:
  • Small drill bit (1/16 or ⅛) to help pre-drill holes
  • WD-40

This all in one storage cube with over sixty thread holders, five shelves and two rods for hanging and storing ribbon is the ideal storage compartment your sewing room needs to help you stay organized.

CABINET DIMENSIONS

• Storage Cube Dimensions:
  • 21” W x 19 ¾” D x 29 1/4” H
• Adjustable Shelf Dimensions:
  • 9 ½” W x 8 ¼” D
• Available Finish: White
• The Storage Cube features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The Storage Cube is shipped ready to assemble in one box
• The Storage Cube ships via UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

The Emu sewing cabinet is the center island in your craft room. The Emu measures 36” tall and offers a spacious 24” x 12” opening with a three position airlift mechanism that moves your sewing machine or serger up and down into position with a push down.  The lift will support a 55 pound sewing machine. The sewing machine platform is height adjustable allowing you to adjust the height based on your sewing machine's measurements.

CABINET SPECIFICATIONS

• Cabinet dimensions:
  • Open: 71” W x 31 ⅜ ” D x 36 ⅛ ” H
  • Closed: 36 ½” W x 31 ⅜ ” D x 36” H
• Drawers (5 – storage side)
  • Small drawers (4 total): 11 ¾” W x 7 ⅜ ”  D x 3 ⅞ ” H
  • Larger drawer (1 total): 11 ⅞ ” W x 7 ⅜ ” D x 8 ⅛ ” H
• Adjustable shelves (3 – storage side): 17” W x 10 ⅜ ” D
• Adjustable shelves (5 – lift side): 4 ½ ” W x 9 ⅝” D
• Emu Cabinet is ideal for Sewing Machines:
  • Up to 55 pounds
  • Maximum Machine Dimensions:
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½ ” (front to back)
    • Height: 14”
    • Sewing machine opening is beveled
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The Emu features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT EMU SEWING CABINET

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1

• Janome – Horizon Memory Craft 15,000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

• Storage includes: 
  • Three adjustable shelves to the left of sewing well (lift side)
  • Five drawers located on the opposite side of the sewing well (storage side)
  • Five adjustable shelves on the opposite side of the sewing well (storage side)
• Adjustable three-position airlift:
  • Moves your machine into three positions: free arm, flatbed, and storage
  • Manual platform design with a 55-pound sewing machine capacity

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five separate boxes
• Emu weighs a total of 226 pounds
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench

CABINET SPECIFICATIONS

• Cabinet Dimensions:
  • 46 ½” W x 39” D x 30” H
    • Width is measured from back corner to right or left side
• MOD Corner Cabinet is ideal for Sewing Machines:
  • Up to 45 pounds
  • Maximum Machine Dimensions:
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14”
    • Sewing machine opening is beveled
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire MOD Corner Cabinet features tough melamine laminate, MDF, and composite wood
• Optional Custom Machine Insert for a flush surface (sold separately)

SEWING MACHINES THAT DO NOT FIT MOD CORNER CABINET

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

SHIPPING INFORMATION

• The Corner Cabinet is shipped ready to assemble in 2 separate boxes
• MOD Corner Cabinet weighs a total of 117 pounds
• Due to cabinet size, product shipped on a pallet via LTL
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUAL

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench

This never ending workspace is what you didn't know you needed in your sewing or craft room, The cabinet, quilt leaf and rolling caddy included offers 31 ½ square feet, ensuring you have enough room to take on bigger projects.

This cabinet comes in both Teak and Ash White.

CABINET SPECIFICATIONS

• Open Cabinet Dimensions:
  • Quilt leaf open & rolling caddy extended in front:
    • 100 ½” W x 80 ¼” D x 29 ½” H
  • Quilt leaf folded down and the rolling caddy is tucked away:
    • 100 ½” W x 22 ¼” D x 29 ½” H
  • Closed Dimensions:
    • 49 ¾” W x 22 ¼” D x 30 ¼” H
• Caddy Dimensions:
  • 13 ⅜” W x 16″ D x 13 ½ ” H
  • Drawer Dimensions (two drawers)
    • 11″ W x 11 ⅛” D x 2 ¾” H
• Door Bin Dimensions:
  • Large: 17″ W x 5 ¼” D x 5 ¼” H
  • Small: 17” W x 3 ⅛” D x 3 ⅛” H
• Aussie II is ideal for Sewing Machines:
  • Up to 55 pounds
  • Maximum Machine dimensions:
    • Width: 23 ¾”  (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire Aussie II features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT INTO THE AUSSIE II

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna – eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

CABINET SPECIFICATIONS

• Open Cabinet Dimensions:
  • Quilt leaf open & rolling caddy extended in front:
    • 100 ½” W x 80 ¼” D x 29 ½” H
  • Quilt leaf folded down and the rolling caddy is tucked away:
    • 100 ½” W x 22 ¼” D x 29 ½” H
  • Closed Dimensions:
    • 49 ¾” W x 22 ¼” D x 30 ¼” H
• Caddy Dimensions:
  • 13 ⅜” W x 16″ D x 13 ½ ” H
  • Drawer Dimensions (two drawers)
    • 11″ W x 11 ⅛” D x 2 ¾” H
• Door Bin Dimensions:
  • Large: 17″ W x 5 ¼” D x 5 ¼” H
  • Small: 17” W x 3 ⅛” D x 3 ⅛” H
• Aussie II is ideal for Sewing Machines:
  • Up to 55 pounds
  • Maximum Machine dimensions:
    • Width: 23 ¾”  (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire Aussie II features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in 5 separate boxes
• Aussie II weighs a total of 235 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later