WALLABY CABINET WHITE

Expand your workspace with the incredible Wallaby Cabinet. This Cabinet has a three position airlift that holds most sewing machines comfortably and moves effortlessly up and down in a small footprint.

CABINET SPECIFICATIONS

• Closed Dimensions:
  • Closed: 42 ¾” W x 19″ D (front to back) x 30 ¼” H
  • Open: 70 ⅝” W x 59 ⅞” D x 29 ½” H
• Sewing Machines That Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23 ¾” (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Made from melamine laminate, MDF, and composite
• Additional Questions? Visit our FAQs page

• • Cubby Width: 13 ¼”
  • Cubby Depth: 14 ¾”
  • Cubby Height: 15 ½”

SEWING MACHINES THAT DO NOT FIT WALLABY II

• Baby Lock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Elna – 920 eXpressive
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.

SHIPPING INFORMATION

• Cabinet ships in four boxes
• Weighs a total of 170 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Adjustable wrench
• Optional:
  • Small drill bit (1/16 or ⅛) to help pre-drill holes
  • WD-40

Just like her younger sister (the Gidget I), the Gidget II Table is a self-contained, fully collapsible workstation. Once she arrives, you’ll be saying goodbye to the wiggles, wobbles and general woes of other sewing tables.

But that doesn’t mean she can’t easily be stored or transported. With velcro straps to secure her steel locking legs and dual-wheel roller design, transportation to classes, retreats and even your RV is a breeze.

What’s more, an increased opening size of 23 ½” W x 12 ½” D, means the Gidget II Table is capable of supporting a 45-pound machine!

Find out more about the Gidget II table below!

Table Specifications

• Dimensions Open:
  • 40 ¼” W x 19 ¾” D x 28 ½” H
• Dimensions with Legs Folded:
  • 40 ¼” W x 19 ¾” D x 4 ½” H
• The Gidget II Table will accommodate sewing machines no larger than:
  • 23 ½” W (left to right)
  • 12 ¼” D (front to back)
  • *Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.

SHIPPING INFORMATION

COMPARE GIDGET I VS. GIDGET II

Do you need a place to help organize your thread spools? The thread storage cabinet is for you! Place your thread in the racks in a color-coordinated fashion, by size, by brand, or by material.

CABINET SPECIFICATIONS

• MOD 5 Thread Cabinet Dimensions (Drawers closed):
  • 38 ½ ” W x 23” D x 30” H
• Thread Spool Holders Dimensions:
  • 2” W x 16 ¾” D x 4 ¼” H
• Cone Spool Holders Dimensions:
  • 3 ⅛” W x 14 ½” D x 5 ⅜ “ H
• The entire MOD 5 Thread Caddy features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in 3 separate boxes
• MOD 5 Thread Cabinet weighs a total of 208 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• MOD 5 Thread Cabinet is available fully assembled at Arrow Dealers

ASSEMBLY MANUAL

• Phillips screwdriver with #2 head or power screwdriver
• ⅛ Drill Bit
• Level
• Clamp

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

• Kangaroo II Cabinet Dimensions
  • Open (quilt leaf out)
    • 55 ⅝” W x 40 ½” D x 29 ½ H
  • Closed
    • 55 ⅝” W x 21” D x 29 ½ H
• Joey II Dimensions
  • 25 ¾” W x 16 ½” D x 24″ H
  • Top two drawer dimensions:
    • 22 ½ ” W x 13″ D x 2 ½” H
  • Bottom drawer dimensions:
    • 22 ½ ” W x 13″ D x 8″ H
• Sewing Machines that Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23-3/4” (left to right)
    • Depth: 12-1/2” (front to back)
    • Height: 14-1/2”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Both products made from melamine laminate, MDF, and composite
• Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

• BabyLock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five boxes
• Kangaroo II weighs a total of 156 pounds
• Joey II weighs a total of 60 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Optional:
  • WD-40
  • Adjustable wrench

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

• Kangaroo II Cabinet Dimensions
  • Open (quilt leaf out)
    • 55 ⅝” W x 40 ½” D x 29 ½ H
  • Closed
    • 55 ⅝” W x 21” D x 29 ½ H
• Joey II Dimensions
  • 25 ¾” W x 16 ½” D x 24″ H
  • Top two drawer dimensions:
    • 22 ½ ” W x 13″ D x 2 ½” H
  • Bottom drawer dimensions:
    • 22 ½ ” W x 13″ D x 8″ H
• Sewing Machines that Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23-3/4” (left to right)
    • Depth: 12-1/2” (front to back)
    • Height: 14-1/2”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Both products made from melamine laminate, MDF, and composite
• Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

• BabyLock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five boxes
• Kangaroo II weighs a total of 156 pounds
• Joey II weighs a total of 60 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Optional:
  • WD-40
  • Adjustable wrench

The Ava J Embroidery Cabinet is specially made for large and heavy industrial machines the perfect fit for your Juki, Janome and Elna. With three storage drawers, two cubbies and a pull-out thread space capable of holding 49 standard embroidery spools, everything will have a perfect place on this table insuring to keep you organized.

CABINET SPECIFICATIONS

• Ava B Opening:
  • 12 ½” W
• Ava J Opening:
  • 7 ½” W
• Dimensions:
  • 35 ½” W x 23 ½” D X 35″ H
• 2 Drawer Dimensions:
  • 26 ¾” W x 16″ D x 2″ H
• Single Drawer Dimensions:
  • 13″ W x 16 ¼” D x 5 ½” H
• 2 Cubby Dimensions:
  • 13″ W x 22 ¾” D x 7″ H
• Side Storage Shelf Dimensions:
  • 3 ¼” W x 21 ¾” D x 6″ H

SHIPPING INFORMATION

• The Ava ships ready to assemble in four boxes.
• Ava weighs a total of 199 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench