KANGAROO AUSSIE II TEAK

This never ending workspace is what you didn't know you needed in your sewing or craft room, The cabinet, quilt leaf and rolling caddy included offers 31 ½ square feet, ensuring you have enough room to take on bigger projects.

This cabinet comes in both Teak and Ash White.

CABINET SPECIFICATIONS

• Open Cabinet Dimensions:
  • Quilt leaf open & rolling caddy extended in front:
    • 100 ½” W x 80 ¼” D x 29 ½” H
  • Quilt leaf folded down and the rolling caddy is tucked away:
    • 100 ½” W x 22 ¼” D x 29 ½” H
  • Closed Dimensions:
    • 49 ¾” W x 22 ¼” D x 30 ¼” H
• Caddy Dimensions:
  • 13 ⅜” W x 16″ D x 13 ½ ” H
  • Drawer Dimensions (two drawers)
    • 11″ W x 11 ⅛” D x 2 ¾” H
• Door Bin Dimensions:
  • Large: 17″ W x 5 ¼” D x 5 ¼” H
  • Small: 17” W x 3 ⅛” D x 3 ⅛” H
• Aussie II is ideal for Sewing Machines:
  • Up to 55 pounds
  • Maximum Machine dimensions:
    • Width: 23 ¾”  (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire Aussie II features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT INTO THE AUSSIE II

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna – eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

CABINET SPECIFICATIONS

• Open Cabinet Dimensions:
  • Quilt leaf open & rolling caddy extended in front:
    • 100 ½” W x 80 ¼” D x 29 ½” H
  • Quilt leaf folded down and the rolling caddy is tucked away:
    • 100 ½” W x 22 ¼” D x 29 ½” H
  • Closed Dimensions:
    • 49 ¾” W x 22 ¼” D x 30 ¼” H
• Caddy Dimensions:
  • 13 ⅜” W x 16″ D x 13 ½ ” H
  • Drawer Dimensions (two drawers)
    • 11″ W x 11 ⅛” D x 2 ¾” H
• Door Bin Dimensions:
  • Large: 17″ W x 5 ¼” D x 5 ¼” H
  • Small: 17” W x 3 ⅛” D x 3 ⅛” H
• Aussie II is ideal for Sewing Machines:
  • Up to 55 pounds
  • Maximum Machine dimensions:
    • Width: 23 ¾”  (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire Aussie II features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in 5 separate boxes
• Aussie II weighs a total of 235 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later

This cabinet helps you stay incredibly organized by separating your fabrics and notions. The four rolling casters that lock in place also allow for easy movement so you have storage wherever you need it. Use next to our other popular MOD Squad Product or with any of our cabinets for additional storage space for your sewing and craft needs.

CABINET SPECIFICATIONS

• Cabinet Dimensions:
  • 29 ⅝” W x 23” D x 30” H
• Drawer Dimensions (5):
  • 25 ¼” W x 16 ¼” D x 3” H
• The entire MOD 5 Drawer Caddy features tough melamine laminate, MDF, and composite wood

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in 2 separate boxes
• The MOD 5 Drawer Caddy weighs a total of 123 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY MANUAL

• Phillips screwdriver with #2 head or power screwdriver
• ⅛ Drill Bit
• Level
• Clamp

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

• Kangaroo II Cabinet Dimensions
  • Open (quilt leaf out)
    • 55 ⅝” W x 40 ½” D x 29 ½ H
  • Closed
    • 55 ⅝” W x 21” D x 29 ½ H
• Joey II Dimensions
  • 25 ¾” W x 16 ½” D x 24″ H
  • Top two drawer dimensions:
    • 22 ½ ” W x 13″ D x 2 ½” H
  • Bottom drawer dimensions:
    • 22 ½ ” W x 13″ D x 8″ H
• Sewing Machines that Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23-3/4” (left to right)
    • Depth: 12-1/2” (front to back)
    • Height: 14-1/2”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Both products made from melamine laminate, MDF, and composite
• Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

• BabyLock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five boxes
• Kangaroo II weighs a total of 156 pounds
• Joey II weighs a total of 60 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Optional:
  • WD-40
  • Adjustable wrench

Are you looking for a larger workspace with plenty of storage? This sewing cabinet is right for you. The Kangaroo Joey Cabinet comes in a beautiful brown teak and ash white, complimenting your sewing or craft room.

CABINET SPECIFICATIONS

• Kangaroo II Cabinet Dimensions
  • Open (quilt leaf out)
    • 55 ⅝” W x 40 ½” D x 29 ½ H
  • Closed
    • 55 ⅝” W x 21” D x 29 ½ H
• Joey II Dimensions
  • 25 ¾” W x 16 ½” D x 24″ H
  • Top two drawer dimensions:
    • 22 ½ ” W x 13″ D x 2 ½” H
  • Bottom drawer dimensions:
    • 22 ½ ” W x 13″ D x 8″ H
• Sewing Machines that Fit:
  • Supports sewing machines up to 55 pounds
    • Width: 23-3/4” (left to right)
    • Depth: 12-1/2” (front to back)
    • Height: 14-1/2”
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine.
• Both products made from melamine laminate, MDF, and composite
• Cabinet ships ready to assemble

SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II

• BabyLock – Destiny & Solaris
• Brother – Dream VX8500D & Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15,000
  • Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• Elna –  eXpressive 920
  • Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
• The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in five boxes
• Kangaroo II weighs a total of 156 pounds
• Joey II weighs a total of 60 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If an optional custom insert is ordered at the same time, it will be shipped separately and delivered three-four weeks later

ASSEMBLY MANUALS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer or mallet
• Optional:
  • WD-40
  • Adjustable wrench

The Ava J Embroidery Cabinet is specially made for large and heavy industrial machines the perfect fit for your Juki, Janome and Elna. With three storage drawers, two cubbies and a pull-out thread space capable of holding 49 standard embroidery spools, everything will have a perfect place on this table insuring to keep you organized.

CABINET SPECIFICATIONS

• Ava B Opening:
  • 12 ½” W
• Ava J Opening:
  • 7 ½” W
• Dimensions:
  • 35 ½” W x 23 ½” D X 35″ H
• 2 Drawer Dimensions:
  • 26 ¾” W x 16″ D x 2″ H
• Single Drawer Dimensions:
  • 13″ W x 16 ¼” D x 5 ½” H
• 2 Cubby Dimensions:
  • 13″ W x 22 ¾” D x 7″ H
• Side Storage Shelf Dimensions:
  • 3 ¼” W x 21 ¾” D x 6″ H

SHIPPING INFORMATION

• The Ava ships ready to assemble in four boxes.
• Ava weighs a total of 199 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box

ASSEMBLY INSTRUCTIONS

• Phillips screwdriver with #2 head or power screwdriver
• Hammer/mallet
• Optional:
  • WD-40
  • Adjustable wrench

A great sewing table that is strong, supportive and can be easily tucked away. Luckily, the Gidget I Table is all of these things and more! With powerful steel locking legs, ergonomic height positioning and a collapsible frame for easy storage, the Gidget I is there when you need it and out of sight when you don’t.

Use the Gidget I as your everyday table, or as your traveling table to be creative anywhere at any time!

What we love about the Gidget table is that it allows you to have a larger work space for sewing and quilting.

TABLE SPECIFICATIONS

• Dimensions Open:
  • 40″ W x 19 ¾” D x 28 ¼” H
• Dimensions with Legs Folded:
  • 40″ W x 19 ¾” D x 4 ½” H
•  The Gidget I Table will accommodate sewing machines no larger than:
  • 17 ½” W (left to right)
  • 7 ⅜” D (front to back)
  • If your machine is equal to or less than those measurements, it will fit the opening.
• Construction: Melamine/MDF with Steel Legs

SHIPPING INFORMATION

• The cabinet is fully assembled and shipping one box
• Gidget I weighs a total of 35 pounds
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• Please email our store with your machine type so that we may order your insert. There is an additional charge.

COMPARE GIDGET I VS. GIDGET II

• Gidget I has a smaller opening size (17 ½” W vs 7 ⅜” D) compared to the large opening on Gidget II (23 ½” W x 12” D)
• Gidget II Table features two wheels for easier portability when folded flat. Gidget I does not have wheels but can easily be transported with collapsible legs.
• Gidget I is made of particle board with steel locking legs. Gidget II is made with denser MDF (medium density fiberboard) and steel locking legs.
• Gidget II will require a  custom insert for her opening. Gidget I has a smaller opening, and may not need an insert if your machine is deep enough to fill most gaps.

ASSEMBLY INSTRUCTIONS