Small Spool Caps (Set of 2)

These little spool caps may be tiny but they certainly are mighty! Spool caps are important for holding your thread in place as you sew. Our Glide 40W Mini spools work perfectly with these small spool caps. It is very important to match the cap size with the size of the spool you are using to prevent tension issues. Make sure you have a couple extra on hand in case one goes missing so the sewing never has to stop.

Works with the following machines:

• DX-1500QVP

• DX-2000QVP

• DX-3000QVP

• DX-4000QVP

• HZL-DX5

• HZL-DX7

• HZL-F300

• HZL-F400

• HZL-F600

• HZL-NX7

This Thin Fabric presser foot is designed specifically for sewing lightweight materials easily.

Since the needle drops into a round opening, this presser foot reduces puckering when sewing lightweight materials, preventing skipped stitches as well as faulty stitching.

Compatible with all Juki TL models. Such as:

• Juki TL models include Juki TL-18QVP Haruka, Juki TL-15, Juki TL-2020PE, Juki TL-2010, Juki TL-2010Q, Juki TL-2000Q, Juki TL-2000QI, Juki TL-98, Juki TL-2200QVP Mini sewing machines.

Part Number: A98130960A0A

• By covering the upper looper, you can sew with only two threads (lower looper thread and needle thread). Although two pieces of fabric cannot be sewn together, you can easily sew overlocking with two threads.

This box collects scraps of fabric cut by the overlock sewing machine.

• This is useful for throwing out all scraps after work is completed, without allowing them to scatter around the work area. When storing the sewing machine, accessories such as the foot controller can be stored in the box.

Series & Part Number

• MO-1000/2000: 40134096

• MO-735: A9108-130-000

• MO-114D/104D: A910-880-L000

• MO-655: A9108-202-000

• MO-654DE: A9108-202-000

• MO-644D: A9108-202-000

• MO-623: A9108-202-000

• MO-1200QVP: A910-880-L000

• Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8 mm width is best.